PROVISION OF CERTAIN BATHROOM NEAR ARMY HILL, BRIEFING HALL, IRON GRILL AT VARIOUS PLACESS, TIN SHED AT MAIN GUARD ROOM, HEAT PILLAR AND WATER DISPENSAR, 100 KVA ISOLATION TRANSFORMER AT LOS BUILDING, SPLIT AC, FLAME PROOF MOTOR AND ALLIED WORK FOR P

Amount

B/R PORTION

Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for any type of soil and getting out complete all as specified and directed by Enginner-in- Charge.

Material and labour for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed .

Material and labour for random rubble stone masonry walling uncoursed, well bonded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Enginner-in- Charge.

Material and labour for brick work in cement mortar 1:6 with sub class `B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Enginner-in- Charge.

Returning, filling in, including spreading,leveling, watering and well ramming in layers not exceeding 25 cm with excavated soil complete all as specified and directed by Enginner-in- Charge.

Removing of soil to distance exc 1.5 KM and n.exc 5.00 KM depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed .

Material and labour for 40 mm thick Damp proofing course with PCC 1:2:4 type B0 ( using 12.50 mm graded stone aggregate ) to horizontal or vertical surface including necessary form work complete all as specified and directed by Enginner-in- Charge.

Suuply only integral water proofing compound conforming to relevant IS complete all as specified and directed by Enginner-in- Charge.

Material and labour for RCC Type B0 1:2:4 (12.5 mm graded agg) nominal Mix as in RCC Beams, contilevers, bressummers, lintels over 1.50 m span complete all as specified and directed by Enginner-in- Charge.

Material and labour for RCC Type B0 1:2:4 (12.5 mm graded agg) nominal Mix as in RCC slab complete all as specified and directed by Enginner-in- Charge.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Enginner-in- Charge.

All as per item no.12 above but 5 to 10 mm dia as in stirrups complete all as specified and as directed .

Material and Labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for MS rolled sections as in main andcross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410- (Gde-E-250) quality-A complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed .

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook all as specified and directed.

Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and directed by Enginner-in- Charge.

Material and Labour applying two coats of Synthetic enamel paint over a coat of primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed .

Supply and fixing Steel ventilator with top hung shutter including hinges, steel peg stay, completecomplete all as specified and directed by Enginner-in- Charge.

Supply and fix 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed with aluminium frame work complete all as specified and directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed by Enginner-in- Charge.

Material and labour for rendering 15mm thick in two layer ( 10 +5 ) mm with cement mortar (1:4) on fair faces of brickwork or concrete surfaces , top layer mixed with WPC including finished the surface even and smooth without using extra cement complete all as specified and directed by Enginner-in- Charge.

Material and labour for glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed by Enginner-in- Charge.

Material and labour for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded aggregate ) as in subbase of floor complete all as specified and directed by Enginner-in- Charge.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of size exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over 10 mm thick screed bed or bedding layer in CM(1:4) and 25 mm thick PCC 1:2:4 type B0 sub floorcomplete all as specified and directed by Enginner-in- Charge.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 ( using 40 mm graded stone aggregate ) as in plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and fair complete all as specified and directed by Enginner-in- Charge.

Material and Labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and directed by Enginner-in- Charge.

Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and directed by Enginner-in- Charge.

M&L for applying two coats of Antifungal Acrylic Exterior Emulsion paint over a coat of primer in camouflange pattern on newly plastered surfaces of walls and preparation of walls complete all as specified and directed by Engr-in-Charge.

Supply and fix for vitreous China, semi-pedestal pattern (Anglo-Indian Type) water closet pan, white (excluding fixing bolts, flushing cisternand flush pipe), Seat and cover and trap , including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as directed

Supply and fix 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed by Enginner-in- Charge.

Supply and fix 15 mm bore GI tube , medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Enginner-in- Charge.

All as per item No-33 above but 20 mm bore complete all as specified and directed by Enginner-in- Charge..

Supply and fix Chromium Plated Bib taps 15 mm bore cast copper alloy with crutch or butterfly handle, screwed for iron pipe fancy type complete all as specified and directed by Enginner-in- Charge.

Supply and fix Chromium Plated Stop valve / Angle valve 15 mm bore , cast copper alloy, fancy type , screwed for iron pipe complete all as specified and directed by Enginner-in- Charge.

All as per item No-36 above but 20 mm bore complete all as specified and directed by Enginner-in- Charge.

Supply and fix PVC connection 15 mm bore with PTMT nut of length 450 mm complete all as specified and directed by Enginner-in- Charge.

Supply and fix 32 mm bore PVC waste pipe for wash hand basin/Urinal complete all as specified and directed by Enginner-in- Charge.

Supply and fix Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement complete all as specified and as directed .

Supply and fix 110 mm dia PVC Pipe complete all as specified and directed by Enginner-in- Charge.

Supply and fix 75 mm dia PVC Floor trap complete all as specified and directed by Enginner-in- Charge.

Material and labour for plain cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate as in cills, copings benching for manhole etc, bed block including necessary formwork complete all as specified and directed by Enginner-in- Charge.

Supply and fix solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Enginner-in- Charge.

Supply and fix Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions complete all as specified and directed by Enginner-in- Charge.

Supply and fix Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 100mm long complete all as specified and directed by Enginner-in- Charge.

Supply and fix Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Enginner-in- Charge.

Supply and fix Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and directed by Enginner-in- Charge.

Supply and fix for Health faucet CP with 1.5 metre long flexible tube/pipe with wall hook/bracket to rest the fauset etc all as directed.

Supply and fix for basin mixer single liver without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed.

Supply and fix for Wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and as directed.

Supply and fix for 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

Supply and fix for 100 mm overhead shower round shape single flow (ABS Body chrome plated with gray face plate) with Rubit cleaning system complete all as specified.

Supply and fix for shower arm casted 190mm long light body round shape for wall mounted shower with flange complete all as specified.

Supply and fix 100 mm dia Grating doom of PTMT (Minimum weight 25gms) complete all as specified and as directed.

Supply and fix for Toilet paper Holder of Brass,Glossy finish all as specified and directed.

Supply and fix for Soap dish, brass chromium plated of suitable size, first quality, and fixed to plugs with chromium plated brass screws all as specified and directed.

Supply and fix for Vitreous china urinal partition white of size 310x700 mm.

Excavating in trenches not exceeding 1.5m wide and n.exceeding 3.0 m in depth; for any type of soil and getting out complete all as specified and directed by Enginner-in- Charge.

Material and labour for brick work in cement mortar 1:6 with sub class `B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Enginner-in- Charge.

Material and labour for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and as directed.

Material and labour for 150mm dia bore reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and as directed.

Concrete bed to drain pipes of 150mm dia , 1:3:6 (type C-2) using 40mm grade stone aggregate including forming cradles; in complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on fair masonry surfaces and finished fair and even without using extra cement complete all as specified and as directed.

Rendering 10mm thick on masonry surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.(WPC will be measured and paid seperately).

Material and labour for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for manholes etc set in CM 1:4 . incl necessary formwork complete all as specified and as directed.

Cutting holes in stone walls built in cement mortar depth exc half brick but not exc one brick for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type -B-1 As required

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication, complete all as specified.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer.

S&F Butt hinges of size 125mm, heavy weight, cold rolled mild steel, and fixed, complete all as specified and directed.

S&F Mild steel sliding door bolts in 200mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

Excavating in post holes (or similar holes) in soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed .

Supply and fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed .

Suuply and fix rolled mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed .

Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed .

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed

Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed.

E/M PORTION

M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC conduits concealed/surface with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified.

Supply and fix modular switch,1way, 1 modole 6 Amp single pole,oneway complete all as speciifed and as directed

M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC conduits concealed/surface with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified.

Supply and fix modular socket 16A - 2/3 pin combined 2 module, compelete all as specified and directed.

S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F triple pole & neutral, modular type, double door, metallic distribution board, 4 way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP RCCB / RCBO / Isolator / MCB as incomer and SP/TP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S&F MCCB 63 Amp 4 pole complete all as specified and directed by Engineer in Charge.

S&F MCB SPN 6 to 40 Ampp complete all as specified and directed by Engineer in Charge.

S&F SP 6- 32 A, 230 V, 50 Hz, 1P MCB ('C' curve) complete all as specified and directed by Engineer in Charge.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed / PVC casing caping/ PVC conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5.sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed / PVC casing caping/ PVC conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of 2.5 sqmm main cable and one RM of 2.5 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, PVC cover on ground level. GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge. Note : - If earthing value is less than 5 Ω , Then extra earthing shall be done free of cost.

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make:- Bajaj/ Usha/ Crompton Greaves/Recold.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp complete all as specified and as directed.

Supply and fix twin LED lights fitting Four feet 1x 20 Watt LED 6500K and 3000K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. Make:- Philips / Crompton /Havells

Supply and fix LED lights fitting Two feet 1x 10 Watt LED 6500 K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and laying earth continuity conductor or main galvanised steel wire of dia 4mm mm burried in ground, fixed to wall, any other indicated situation for loop earthing and the like upto test point on necesarry insulators and fastning screws, rawl plugs complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by engineer-in-charge. Make:- Philips / Usha/ Crompton.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 16 Sq.mm 4core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

S&F in replacement of rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500Ltrs complete all as specified and as directed by Engineer-in-Charge. Note :-This work are excute at the hight level up to 10 mitre, accordingly bidder are arrange all necessery arrangement, scafolding and other conected T&P which are required at site and nothing extra shall be admissible on this ground .Bidder are requested to quote theire rate accordingly.

S&F Steel water tubing medium grade galvanised 20 mm size ( ISI marked) with all fittings such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc or /getting out cable cover and stacking for reuse/ credit , trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cables with 8 CM thick before laying of cables and 15 CM thick after laying and stretching of Cable complete all as specified and directed. Note:- Punned thickness 18cm shall be measured and paid.

M & L for sub class 'B' brick for covering to under ground cable laid flat transversally width equal to the lenth of the cable complete all as specified and directed.

Supply and fix Corded Electric heat pillar modrn sleek desingn carbon fiber heating technology, instant heating not less than 1500 watt indoor type ISI marked with copper winding motor including Rod of 1500 watt portable type 230 volts AC, 50 Hz complete all as specified and directed. Make : Belco/GIMIX/Gopi or approved by GE

Supply and fix hot, cold and normal water dispenser, having option of dispensing hot and cold water with cooling capacity 3.2 ltrs/hr with hot water storage capacity 0.90 litres, power 500 watt, 230 volt, 50 Hz dimention not less than 310 mm x 345 mm x 940 mm and storage tank capacity 20 ltrs, working in R - 134a refrigerant. Complete all as specified and directed Make : Voltas/ATLANTIS/Blue Star or its equivalent as approved by GE

Supply, install, commissioning and testing of Isolation transformer of capacity 100 KVA, 3 phase, 415 Volts, 50 Hz, as per IS 2026 (Part - I) 2011. ONAN type cooled oil immersed copper wound indoor type complete with first filling of IS; 335 ISI marked filtered & Dehydrated Transformer oil, electrostatic shield between primary 415 V in Delta connected & secondary 415V Star connected complete & other standard fittings/ accessories with vector group symbol Dyn-11 including cable box on in coming and out going with cable glands with supporting stracture, foundation, nuts, bolts, rating diagram and lifting arrangement complete all as specified and as directed. Make : ITE Gurgoan/Volina/ABB or its equivalent approved by GE

Supply and install Hi-wall hot and cold split type Air conditioner working on single phase, 240 volts, 50 Hz AC supply with cordless remote control unit, built-in air ionizer and plasma filter for better air quality with BEE 3 Star rating and in built heating and cooling arrangement, copper wound rotary compressor with digital inverter technology suitable for CFC free refrigerant of capacity 1.5 TR including fixing of indoor and outdoor unit, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable and plug top complete all as directed by Engineer-in-Charge. [Make: Blue Star/ Daikin/ Voltas/ Carrier/ Hitachi]

M & L for route pipe (copper tube) of size 3/8" dia complete with insulation complete all as specified and directed by Engineer-in-Charge.

M & L for route pipe (copper tube) of size 5/8" dia complete with insulation complete all as specified and directed by Engineer-in-Charge.

Supply & Install automatic voltage stabilizer wall mounted single phase 50 cycles AC supply complete with volt meter and designed for input voltage of 160 volts to 260 volts and out put voltage stablized between 230 volts + 10% of capacity 3 KVA with high low voltage and time delay relay complete all as specified and directed by Engineer in Charge. Make V Guard, Blue Bird, Microtek

S&F Steel water tubing medium grade galvanised ( ISI marked) with all fittings such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) of size 15 mm dia complete all as specified and directed.

S & F single pole & neutral, modular type, double door, metallic distribution board 4 way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 200 A busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

Supply and fix flame proof centrifugal pump of capacity 3 HP, 415 volt, 3 phase, IEZ class, confirming to IS/IEC 60079-0 : 2004 & 2007, mechanical seal, MS base plate with TEFC enclosure with insulation class F, Min 20 Mtr head and 20 Cum/Hrs discharge complete all as specified and directed. Make : Bharat Bijli/Sudhir/Kirloskar

Supply and fix flame proof centrifugal pump of capacity 1 HP, 415 volt, single phase, IEZ class, confirming to IS/IEC 60079-0 : 2004 & 2007, mechanical seal, MS base plate with TEFC enclosure with insulation class F, Min 10 Mtr head and 20 Cum/Hrs discharge complete all as specified and directed. Make : Bharat Bijli/Sudhir/Kirloskar

Supply and fix Flame proof (FP) switch socket & plug combined in LM6 cable termination box in LM6, 16 Amps, 250 Volts, 2P+earth complete all as specified and directed.

S&F submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complere all as specified and directed.

M&L for steel conduit of dia 25mm including all accessried complet all as specified and directed

Supply and fixing of gun metal globe / gate valve (ISI) marked of size 50 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing gun metal globe / gate valve (ISI) marked of size 40 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed

Supply and fixing of gun metal globe / gate valve (ISI) marked of size 25 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed

S&F Steel water tubing medium grade galvanised (ISI marked) of size 40 mm dia with all fittings (such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) complete all as specified and directed

Supply and laying HDPE pipe of dia 50 mm laying in trenches/wall/roof including fixing arrangement complete all as specified and drected.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of pole all as directed including use & waste of necessary form work all as specified and as directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete including dismantling existing rusted sections all as directed.

Supplying, installation, commissioning and testing LT feeder pillar box, outdoor type, overall size not less than 1000 mm x 900 mm brick pedesatal of height 450 mm above ground level) conforming to IS/IEC-61439-1 & 2 with rated fault 50 kA / 1 sec with internal wiring with internal arc containment, suitable for 415 volts 3 phase 4 wire system 50 Hz AC supply and having 4 Nos aluminium bus bar of rating 100 amps. The panel shall be dust proof, vermin proof (IP 54) and powder coated and made out of 3.0mm thick CRCA sheet self moulded type and (50 x 50)mm x 6mm angle iron frame front and rear opening with double shutter and locking arrangement with 50mm size lock with and including grouting of panel with necessary PCC (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and directed comprising of following accessories :- (a) Incoming:- (i) MCCB 32 Amp, 4 Pole, breaking capacity 16 kA with adjustable thermal setting - 01 No. (b) Out going:- (i) MCCB 4 pole 16 Amp, 16 kA breaking capacity with adjustable thermal setting - 02 No (iii) DOL motor starter suitable for 3 HP motor - 02 No. (iv) Indicating LED lamp (RYB)- 01 set of three (v) Digital volt meter 0-500 volt (96mm x 96mm) (vi) Digital Amp meter 0-500 Amp (96mm x 96mm) Make of MCCB :- Siemens/ Schneider/ L&T

Supplying, installation, commissioning and testing LT feeder pillar box, outdoor type, overall size not less than 1000 mm x 900 mm brick pedesatal of height 450 mm above ground level) conforming to IS/IEC-61439-1 & 2 with rated fault 50 kA / 1 sec with internal wiring with internal arc containment, suitable for 415 volts 3 phase 4 wire system 50 Hz AC supply and having 4 Nos aluminium bus bar of rating 100 amps. The panel shall be dust proof, vermin proof (IP 54) and powder coated and made out of 3.0mm thick CRCA sheet self moulded type and (50 x 50)mm x 6mm angle iron frame front and rear opening with double shutter and locking arrangement with 50mm size lock with and including grouting of panel with necessary PCC (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and directed comprising of following accessories :- (a) Incoming:- (i) MCCB 32 Amp, 4 Pole, breaking capacity 16 kA with adjustable thermal setting - 01 No. (b) Out going:- (i) MCCB 4 pole 16 Amp, 16 kA breaking capacity with adjustable thermal setting - 02 No (iii) DOL motor starter suitable for 3 HP motor - 02 No. (iv) Indicating LED lamp (RYB)- 01 set of three (v) Digital volt meter 0-500 volt (96mm x 96mm) (vi) Digital Amp meter 0-500 Amp (96mm x 96mm) Make of MCCB :- Siemens/ Schneider/ L&T

Supply and fix Hot water storage geyser of capacity 450 Lts with heat Pump of capacity 11 Kw with storage tank capacity 450 Lts in normal working conditions to heat water up to 55 degree centigrade to 60 degree centigrade having High and low voltage Protections switch Having Temperature and Pressure relief Valve Input Power 9.36 Kw With Controller, inlet water circulation Pump with pressure Switch, Pressure Gauge with hot return valve Thermal overload ,pump 3 Phase Piping Interconnection for Heat Pump and Tank with composite Pipe including addition heating arrangement with requiredment of element of suitable capacity with quantity as per manufacturer recommendation and. M&L auto control panel for heat pump along with auto cut thermostat, water level indicator and other technical parameter suitable capacity or as per manufacturer recommendation including necessary connection, All Fitting Gate Valve Tee and Elbow Only Tank to Heat Pump connection main Central Control Panel including Installation complete all as specified and directed

Supply and lay 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 40 mm including all PPR brassfittings as required complete all as specified and directed by Engr-in-charge. Make : SFMC or equivelant to Supreme/vectus/Prince

Supply and lay 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 25 mm including all PPR brassfittings as required complete all as specified and directed by Engr-in-charge. Make : SFMC or equivelant to Supreme/vectus/Prince

Supply and fix insulation for distribution line and main raising line of dia 40 mm PPR Pipe outer dia in two layers, thickness on one layer not less than 20 mm including providing necessary T&P and technician for complelte the job complete all as specified and directed.

Supply and fix insulation for distribution line and main raising line of dia 25 mm PPR Pipe outer in two layers, thickness on one layer not less than 20 mm including providing necessary T&P and technician for complelte the job complete all as specified and directed.

S & F PUF insulated stainless steel tank heavy duty of capacity 500 Ltr including MS Angle iron staging for tank and suitable PUF insulation for withstanding outside tempreture of -20 degree centigrade stainless steel tanks shall be of SS 304/576 drade and sheet thickness 1.0mm and suitable connection accessories for connecting water tank complete all as specified and as directed by Engineer in Charge.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed.

DAVINDER SINGH (BID ID -3489789)

shivom builders (BID ID -3489350)

SHARMA SALES CORPORATION (BID ID -3489710)

HIMALAYA ENTERPRISES (BID ID -3489488)

ANIKET TRADERS (BID ID -3489813)

SACHDEVA BUILDERS (BID ID -3489840)

M/s Sunny Gupta (BID ID -3489496)