Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-Finance | L1 | Accepted-Finance Lowest and Reasonable | |
| 2 | L2₹27.4 L+₹1.6 L (6.10%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹28.3 L+₹2.5 L (9.49%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹29.0 L+₹3.2 L (12.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹29.6 L+₹3.8 L (14.6%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
22 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srianagar
Garrison Engineer (AF) Srinagar Air Force Station Srinagar-190007
REPAIR REPLACEMENT TO TANKS, TANK CLEANING, LEGGING ETC OF MD ACCN UNDER AOR OF GE (AF) SRINAGAR AND CAMOUFLAGING TO BUILDING, ROOFING AND OTHER CONNECTED MISC WORK IN CCD PATTERN AS APPROVED BY STN HQ AT BB CANTT AND AREA UNDER AOR OF GE (AF) SRIN
2023_MES_598215_2
GE(AF)SGR-29 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SRINAGAR
All as per Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) SRINAGAR
₹94,000
Yes
2 Sept 2023
8 Aug 2023
23 Aug 2023
8 Aug 2023
22 Aug 2023
15 Aug 2023
Amount
M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
M & L for Lagging to pipes 25mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
Taking up or down 15 mm Bore steel tubing and connections, complete all as specified and directed by the Engr-In-Charge..
S&F for 15 mm Bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors.complete all as specified and directed by the Engr-In-Charge.
Description all as per serial item No 5 but using old serviceable pipes 15 mm bore dismantled under item No 4 here-in-before complete all as specified and directed by the Engr-In-Charge.
Taking up or down 20 mm Bore steel tubing and connections, complete all as specified and directed by the Engr-In-Charge..
S & F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by the Engr-In-Charge..
Description all as per serial item No 8 but using old serviceable pipes 20 mm bore dismantled under item No 7 here-in-before complete all as specified and directed by the Engr-In-Charge.
Taking up or down 25mm Bore steel tubing and connections, complete all as specified and directed by the Engr-In-Charge..
S & F for 25 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by the Engr-In-Charge.
Description all as per serial item No 11 but using old serviceable pipes 25 mm bore dismantled under item No 10 here-in-before complete all as specified and directed by the Engr-In-Charge.
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity including necessary fittings and dismantling of old water tank complete all as specified and directed by the Engr-In-Charge.
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 1000 litre capacity including necessary fittings and dismantling of old water tank complete all as specified and directed by the Engr-In-Charge.
S&F in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete.
S&F in repairs PTMT Ball valves 25 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete.
S&F in repair covers for PVC over head water tanks 300 / 500 / 1000 ltrs capacity (as per sample) complete all as directed.
Dewatering the PVC water tank of capacity upto 500 ltrs cleaning and removing all scales and dirt silt etc from water tank, removing lid without disturbing pipe line system and float valve and making functional after cleaning and writing letter “date of clearance, Date, month and year“ with black/white base painting complete all as specified and directed by Engineer-in-Charge. Periodicity will be assessed by the Engineer-in-Charge according to site condition.
Ditto al as above Item No18 but for tank of capacity 1000tr.
S&F in repair 15 mm Bore Dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete a as specified and directed.
S&F in repair 20 mm Bore Dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete a as specified and directed.
S&F in repair 25 mm Bore Dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete a as specified and directed.
S&F in repair 15 mm Bib taps, fancy type, chromium pated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule andfixed as reqd and as directed by Engineer-In-charge.
S&F in repair 15 mm Stop valves, fancy type, chromium pated, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as reqd and as directed by Engineer-In-charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M & L for Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed by Engineer-in-Charge.
M & L for glazed ceramic (digital glossy finish) coloured tiles 450 x 300 x 7 mm thick on vertical surfaces, alongwith high lighter tiles set and jointed in neat cement slurry and pointed in white/colour cement to match over, Complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Rendering 15mm thick on brick or concrete surface in Cement mortar 1:4, finishing surface even and smooth w/o using extra Cement complete all as directed and specified.
Preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L for preparing of new plastered surface / surface obtain after removal of existing treatment of wall and applying two coats of cement based paint over one coat of primer,colour and tint as ordered in CCD pattern up to 15m height, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of newly plastered surfaces of walls, / surface obtain after removal of existing treatment and applying two coat of weather proof exterior emulsion paint over a coat of primer colour and tint as ordered in CCD pattern upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
M&L preparation of old painted steel and iron surfaces of any description by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots of roof / CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc, exc 10 cm width or girth applying one coat of synthetic enamel paint in colour and tint as ordered in CCD pattern upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
M&L preparation of old painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint colour and tint as ordered in CCD pattern upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing surface treatment from the old painted surfaces vertical or horizontal including brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots etc, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat weather proof exterior emulsion paint, colour and tint as ordered in CCD pattern upto 15 metres height including fascias, parapets etc, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of cement base paint, colour and tint as ordered in CCD pattern upto 15 metres height including fascias, parapets etc, complete all as specified and directed by Engineer-in-Charge.
S&F in repair second class soft wood weather boarding, clean sawn, thickness 20 mm to 25 mm and rebated on thick edge to give 20 mm laps and fixed in eaves board etc upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-In-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge
S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed by Engineer-in-Charge.
All as per item No 41 but except Sheets, complete all as specified and directed by Engineer-in-Charge.
S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth in CCD pattern as approved complete all as specified and directed by Engineer-in-Charge
HAJI ZAHOOR HUSSAIN GANIE
M/S NEW FAROOQ TRADERS
M/S LATIF AHMAD MIR
M/S GHULAM MOHIUDDIN RATHER
M/S WANI AND SONS
M/S KHAN ENTERPRISES
M/S M B ENTERPRISES
M/S MIR SAJAD ENTERPRISES
M/S M.R. Construction
M/S GHULAM MOHAMMAD AND CO.
FG CONSTRUCTION
M/S ZAHOOR ENTERPRISES
M/S FAROOQ AND SONS
M/S TARIQ AHMAD SHEIKH
M/S Abdul Ahad Rather
M/S Thakur & Sons
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .