SPL REPAIR TO BLDG NO T/OPT/66 AND BLDG NO RC-3A TO D (04 ATRS) OF AGE B/R AND AGE E/M UNDER GE TENGA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm complete all as specified and directed

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles

M&L vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished hight shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles all as specified and directed.

Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified.

Material and labour for 300x200x7 mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified.

M&L for chequered cement concrete tiles 20cm X 20cm X 25/ 30cm X 30cm/25 mm thick, set jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments all as specified and directed

M & L for 20mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying granite / chequered cement concrete tiles, complete all as specified and directed

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15mm thick screed bed of CM 1:4 complete all as specified and directed

Demoloition of Cement concrete (unreinforced) of any description and in any situation not otherwise specifically provided for all as specified and directed

M&L for 40 mm thick Cement concrete type B-1 1:2:4 (20mm graded aggregate) as in roof slab all as specified and directed.

M&L for providing, cement concrete 1:2:4, type B-0,(12.5mm graded stone agg) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

Material and labour for taking down of existing tarfelt and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface by picking ,sweeping clean and washing down with water to remove dust etc providing 15mm thick screed bed or bed or bedding layer of cement mortar (1:4) for laying waterproofing membrane and finishing surface even and smooth without using extra cement and providing waterproofing treatment over smooth finished surfaces after applying one coat of cold bituminous primer at 0.30 ltrs / Sqm providing laying APP polymer, modified , non-woven polyster mat,reinforced membrane, 3mm thick (min) weighing 3.50 Kg/Sqm with surface finish of white mineral ,by torch application method , with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminous based solar reflective aluminium paint @ 100Gms /Sqm over APP modified membrane all as specified and directed.(APP Make : STP /Texsa India Ltd)

Taking up or down 15 mm bore steel tubing and connection all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections all as specified and directed.

S&F of 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches

S&F of 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F PVC (SWR) pipes single sockted 110mm dia in any length with rubber ring joints fixed to walls all as specified and directed.

S&F PVC (SWR) pipes single sockted 75mm dia all as specified and directed.

S&F PVC (SWR) bends any radius, with access door 110mm dia all as specified and directed.

S&F PVC (SWR) bends any radius, with access door 75mm dia all as specified and directed.

S&F PVC (SWR) WC connector 110mm dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore all as specified and directed.

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement all as specified and directed.

S & F in repair Vitreous China Wash Down Water Closet Pan (Pedestal Pattern, white) excluding Fixing Boards, Flushing Cistern and Flush pipe all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Squatt pattern) white incl PVC (SWR) 110mm 'P' trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified.

S & F in repair plastic water closet seat cover, white closed pattern with flat bottem, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level,with flush pipe of polythylene of low or high density or PVC 32mm dia for low level cistern white with inlet ball valve float chain and pull and brackets complete all as specified and directed.

S&F 15mm Brass CP wall mixer for mixing hot & cold water screwed down for PPRC/steel pipe or union of 15mm dia complete all as specified and directed (Make:Jaguar or equivalent model in Roca/Kohler)

S&F in Repairs15mm dia angle valve/stop valve chromium plated cast copper alloy fancy type screwed down high pressure with capstan head screwed both endsfor iron pipe or for union complete all as specified and directed.

S & F PVC connecting pipe 600 mm long all as specified and directed.

S&Fin Repairs Brass chromium plated shower rose 125mm size incl fixing to steel pipe or union all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in RepairsTowel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed.

S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed

Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of Make - SONA (Code AL 1001 ) complete all as specified and directed”

S&F Corner GLASS shelf with brackets. Make:- Jaquar Cat Part No :- ACN-CHR-1173,and equivalent model in Roca / Kohler. all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed

S&F central hole basin mixture brass CP (15mm) for hot and cold water screwed down for iron pipe complete all as specified and directed (Make:Jaguar or equivalent model in Roca/Kohler)

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm each but not exdeeding 4 Sqm each(without taking off shutters from the frame) all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frame) all as specified and directed.

M& L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, edges will be painted to match with printed sheet as per specification & drawing all as specified and directed.

Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beadin, PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wooden grain PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wooden grain PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed.

S&F for Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters with three track (sliding type) or one fixed frame and other two track sliding as necessary, aluminium section weighinig not less than 0.55 kg/m including stainless steel wire cloth 0.36mm nominal dia of wire and average with of apreture 1.4 mm and fixed with stainless steel wire staples, necessary joining cleats, glazing clips, rubber packing, 5 mm thick tinted glass, locks, anodised aluminium snap beading, screws two number of roller in each shutter etc with complete all as specified and directed by Engr in charge

S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long 1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L for Sheet glass, 4.8 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed.

S&F 3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed.

S&F 15 mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair for kitchen sink and complete all as specified and directed (Make:Jaguar or equivalent model in Roca/Kohler)

S&F in repair 32mm PVC waste pipe for kitchen sink & WHB complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails,shelves,racks etc all as specified and directed.

S&F Modular Kitchen Lower unit with cutlery, Dish, Bottle and Cylinder cabinet by using Water proof BWR Ply 19 mm Block board, 6mm PVC Ply, 12 mm BWR Ply, Auto hinge "0" Degree and "8" Degree (Hettich/Godrej), 301/303 Grade SS Brackets (Plain, Cutlery& Thali Basket), Channel 500 mm/450 mm (Hettich/Godrej/Sleek), Cylinder Tolly With Dustbin holder, Handles 4 inch, Magnet latch, Inner laminate white colour, outside glossy laminate 0.8mm, Favicol Marine, Lift 25 Kg, Shelf Holder etc all as specified and directed.

S&F Modular Kitchen Upper unit with Lift Advance and auto hinge by using Water proof BWR Ply 19 mm Block board, 6mm PVC Ply, 12 mm BWR Ply, Auto hinge "0" Degree and "8" Degree (Hettich/Godrej), 301/303 Grade SS Brackets (Plain, Cutlery& Thali Basket), Channel 500 mm/450 mm (Hettich/Godrej/Sleek), Cylinder Tolly With Dustbin holder, Handles 4 inch, Magnet latch, Inner laminate white colour, outside glossy laminate 0.8mm, Favicol Marine, Lift 25 Kg, Shelf Holder etc all as specified and directed.

M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specifird and directed.

S&F 75mm size Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and directed.

Material & Labour for prep of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1 mm thick external wall care putty on wall old surfaces all as specified and directed.

Preparation of old treated surface and applying one coat of varnishing finishing coat with synthetic varnish etc complete all as specified and directed.

M&L for Preparing old plastered surfaces of ceiling and applying two coat of whitewash all as specified and directed.

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty on wall complete all as specified and directed by engr in charge

Dismantling of water tanks exc 250 ltrs but n exc 500 ltrs capacity and removing to stores omplete all specified and directed

Dismantling of water tanks exc 500 ltrs but n exc 1000 ltrs capacity and removing to stores omplete all specified and directed

S & F PVC water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical vertical with closed top) hoisted and fixed in position all as specified

S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified

S&F 25 mm dia chromium plated curtain rod of medium weight and fixed brackets and decorative end supports etc complete all as specified and directed.

Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.

M & L for providing 4mm thick "E" Board in ceiling with galvanised iron snap grid frame of 'T' section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper with 1mm thick putty complete all as specified and directed by engr in charge.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc omplete all specified and directed

Material and labour for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid for separetely.

Supply only integrated water proofing compound

Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth W/O using extra cement omplete all specified and directed.

Material and labour for 5mm thick rendering in cement mortor(1:4) on concrete surfaces of ceiling, finished even and smooth W/O using extra cement omplete all specified and directed.

Material & Labour for prep of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1 mm thick external wall care putty on wall new surfaces omplete all specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty on wall complete all as specified and directed by engr in charge

Preparing newly plastered surfaces of ceilings and applying three coats of white wash omplete all specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed

Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed.

Supply and Fix 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

M&L for preparing and applying two coat of synthetic enamel over a priming coat on new zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling wrought iron or mild steel work of any description

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete.

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement

Material and labour for rendering 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces ,finished fair and even without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer.

Material and labour for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion all as specified and directed.

Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistance primer all as specified and directed.

Material and labour for complete removal of existing treatment and appling two coat of cement base paint over one coat of alkali resistance primer complete all as specified

M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces completed all as specified and directed by Engr-in-Charge.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces completed all as specified and directed by Engr-in-Charge.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc all as specified and directed.

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed all as specified and directed.

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece all as specified and directed.

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

S&F Vitreous china urinals, bowl type 465x355x265 mm white, providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe all as specified and directed.

Supply and fix in rep 15mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.

S & F framed work such as grills, gratting, framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging.gates and similar work con-forming to Fe.290.Gde-E-165

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore.

S&F PVC (SWR) vent cowl 110 mm bore

S&F PVC (SWR) couplers 110mm bore.

Refixing 15 mm bore old steel tubing and conncetions in new or old position to walls

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 130 here in before but for one 3 pin socket outlet 6 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 130 here in before but for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 6 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska

Supply and fixing LED light fitting 1 x 20 Watt (warm/white) 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. Make : Havells (Cat No. LHEXAXPNIN1W020 or equivalent

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, (warm/white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbers of clamps, all fixing arrangements such as fastners, bolts, nuts washers etc all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

Supply and fix sheet metal enclosures for Double door DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V 'C' Curve complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V 'C' Curve complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 10 Smm 2 core. Make :- Havells/ Plaza cables/ polycab /Finolex

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.

M&L for in replacement of Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 152 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size

All as per item No. 152 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.

M&L for in replacement of Point wiring with 2.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent complete all as specified and directed.

One light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed .

One bell/buzzer point controlled by one bell push complete all as specified and as directed .

S&F switch piano two way, 5/6 Amp, flush type (ISI marked), single pole, complete all as specified & directed.

MCCB DB's VTPN type double door in wall / nitch when MCBB's ,to be used Four pole and neutral, 8 way,415 Volt with rated Bus bar ,Suitable for Flush Mounting and Surface Mounting with 160 Amps Copper Bus bar for each phase and 2 Neutral bar, 2 Earth bar, and Cable ties for cable managent,Fully insulated busbar and shrouded Neutral bar ,improved Pan assembly for ease of installation ,Prefitted masking sheet, Reversible Door for IP 43 &IP 54 DB's with provision for DPX3 160 MCCB as incomer, and TPN /SPN/DP/SP out going . complete all as specified and directed. IP :54 Protection

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA

S&F in replacement of 2 mm thick MS meter box rectangle type wall mounted including Provision of space for 04 Nos single phase meters, 01 x MCCB 100 Amp as main incoming, 04 Nos aluminum bus bar 150 Amp capacity, and necessary connection complete

Supply and fixing LED light fitting (Warm/White) mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V50 Hz, RPM 1200, Copper winding of size 300 mm sweep with, blades, and frame and louvers

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm

Taking down old exhaust fan any type/size from existing position and depositing to MES yard as directed.

S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 10 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 10 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 10 sqmm earth wire and 2 Run of 10 sqmm cable shall be measured as one run.)

M/S SUNRISE CONSTRUCTION AND CO (BID ID -3490310)

M/S RAM AWADH SINGH (BID ID -3490939)

M/S MURPHEW ENTERPRISES (BID ID -3491415)

M/S ASHOK CONSTRUCTION (BID ID -3491439)

M/S R.N ENTERPRISE (BID ID -3491023)