Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.4 L+₹1.1 L (2.36%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160003
REPAIR/ RESURFACING TO ROADS IN DOMESTIC AREA AT AIR FORCE STATION CHANDIGARH
2022_MES_531706_1
CWE/AF CHD/CHD/T-17/2022-2023
Open Tender
Civil Works
Item Rate
120 days
Chandigarh
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE(AF) Chandigarh
Exempted
25 Aug 2022
17 Jun 2022
4 Aug 2022
17 Jun 2022
26 Jul 2022
2 Jul 2022
60 days
Amount
Scarifying or picking gravelled macadam or bituminous macadam surfaces exceeding 50mm but not exceeding 100mm deep, area not exc 400 Sqm complete all as specified and directed. Note: Rate quoted by contractor shall be deemed to include for removal of rubble/debris outside MoD land.
Material and labour for water bound macadam (WBM), 75 mm thick (compacted thickness), with crushed stone aggregates of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) (sand stones or quartzite), spread, rolled with 8 to 12 tonne power roller and consolidated to required gradient and camber complete, all as specified.
Material and labour for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes and applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @ 10Kg per 10 Sqm with mechanical sprayer, complete all as specified and directed.
Material and labour for premixed bituminous macadam using paving bitumen (VG-30 grade) @ 4% by weight of total mix using 12 to 25mm graded crushed preheated stone aggregate, laid, rolled and compacted with 8 to 10 tonne power roller to required gradient & camber, consolidated thickness 75mm or less, complete all as specified and directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on black top surfaces, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @3Kg/10Sqm with mechanical sprayer on black top surfaces, complete all as specified and directed.
Material and labour for premixed semi dense asphaltic concrete 30 mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade) of physical properties as specified (refer SSR Part-I of 2009), pre-heated, mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing crushed stone coarse aggregate, fine aggregate and binder (bitumen). Semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.
Material and labour for repair to pot holes, depth not exceeding 30mm and area not exceeding 1.0 Sqm each, including sweeping free from dust and mud or water, scoring sunken surfaces of road, cutting around edges to at least 25mm in depth, making good by applying paving bitumen (VG-10) @ 5kg per ten sqm, putting in premixed bituminous macadum, well rammed and sealed with binder 6.8Kg/10 Sqm blinded with 0.06 Cum of stone chipping 6.3mm size and again well rammed / rolled to uniform smooth surface, complete all as specified and directed.
Material and labour for painting 2.5mm thick with thermoplast fluorescent paint of colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic (commercial) machine drive in strips after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces not exceeding 10 cm in width or girth, complete all as specified and directed.
Supply and fixing in repair cat eye solar reflector type, of metal body alloy, of size 100mm x 100mm x 20mm, with PAMA strip lens reflector, fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed. Make-Dark Eye model No DA - 972 or equivalent in Sun eyes/3M/Tata BP solar as approved by GE
Supply and fixing in repair solar cat eye aluminum alloy shell (100% water proofing design ) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions complete all as specified and directed. Make- Dark Eye Model Kohinoor or equivalent in Sun eyes/3M/Tata BP solar as approved by GE
Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and provision of thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make-Sun eyes, Dark Eye/3M/Tata BP solar dark eye.
Supply and fixing in repair solar metal tubular dealineator made out of ABS round body fitted made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Make:- Dark eye or equivalent model from TATA BP/Birla 3M.
Supply and fixing polycorbonate traffic safety convex mirror of 600 mm dia fixed over post of 60 mm dia upto a height of 1.5 metre, made of MS pipe painted in black, having 130 degrees viewing, including necessary earthwork excavation and PCC 1:2:4 of size 450mmx450mmx600mm, complete all as specified and directed. Make- Green Lites or equivalent as approved by GE
Supply and fixing in repair ABS speed breaker/Rubber Rumbler heavy duty of height 75 mm and of size 500 mm x 425 mm each in two colours (Black & Yellow), fixed alternately with reflectors on either side, complete fixed with epoxy and bolts 6 mm dia, 75 mm long fasteners by drilling as per manufacturer's instructions, complete all as specified and as directed. Make :- Model - DA 1001 of Dark Eye or equivalent in makes Oscar/Avery Dennison Alexis/Sharp Eyez/3M TATA.
Demolition of cement concrete (un-reinforced) n exc 15cm thick as in ground floor/ paving and removal of debris outside MoD land, complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in coping, apex stone, kerb stones, etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work and setting in cement mortar 1:4 complete all as specified and directed.
Material and labour for applying two coats of exterior emulsion paint (Apex) over a coat of primer on new concrete surfaces over 10cm girth or width in blue & white or yellow & black shade complete all as specified and directed by Engineer-in-charge.
Material and labour for applying two coats of exterior emulsion paint (Apex) on old concrete surfaces over 10cm girth or width in blue & white or yellow & black shade complete all as specified and directed by Engineer-in-charge.
Manufacturing, supplying and fixing in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacturer over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in cement mortar, in floors/ aprons etc and removal of debris outside MoD land, complete all as specified and directed.
Material and labour for Hardcore of gauge n exc. 63mm of broken stone, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.
Material and labour for Sand filling under floors or in foundations in 25mm layers including watering and consolidation, complete all as specified and directed.
Material and labour for Factory Made Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickess M-40 grade with grey cement and pigment laid over and joints filled with fine sand complete all as specified and directed.
Material and Labour for PCC (1:3:6) type C-1, using 20 mm graded crushed stone aggregates, as in roof kerb, mud stops, etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit of Rs. 58,480.00 for old Materials as per Schedule of Credit
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .