SPECIAL REPAIRS TO OMQs AT AFS YELAHANKA BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm all as specified and directed.

M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloued Ceramic tiles of size 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed in toilets ang kitchen all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for 20mm thick Granite(of any type) work (Table rubbedand polished) in steps,jambs, pillars window cills, coocking plat forms and incl 20mm thick cement mortar (1:4) including pointig in white cement (1:2) using marble dust with admixture of pigment to match all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) and rubbish off the premises complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate for plinth protection, laid in panels complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’thickness of slab 100mm below complete all as specified and directed.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quions complete all as specified and directed.

Demolition of RCC in ground floor and pavings any description and in any position complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for complete removal of existing surface finish and applying two coats of OBD over a coat of 2 to 3mm thick wall care putty all as specified and as directed

M&L preparation of old decorated wall surface and applying two coat of White wash all as specified and directed.

M&L for complete removal of existing surface finish and applying two coat of OBD in ceiling all as specified and directed

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Aluminium Paint all as specified and directed.

M&L for preparation of the old surfaces unplastered of wall complete removal of existing treatment and applying two coat of cement base paint complete all as specified and as directed.

M&L for one coat of exterior emulsion paint to old decorated surfaces of wall ,floor, interlocking & chequred tile or incl preparation of surfaces complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and as directed.

S&F in repair gun metal globe gate valve 20 mm bore all as specified and as directed.

S&F in repair gun metal globe gate valve 25 mm bore all as specified and as directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of cement concrete complete all as specified & directed.Makle Cera/Parryware/Neycer.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (including fixing bolts, but excluding flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/Neycer

S&F plastic pedestal pattern seat cover black with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. Make : Cera/Parryware/Neycer

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.Make : Cera/Parryware/Neycer

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets and fixing of pillar tap all as specified and as directed .Make : Cera/Parryware/Neycer

Supply only Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed complete all as specified.Make : Cera/Parryware/Neycer

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : Cera/Jaguar/Ess Ess.

S&F in repair 15mm dia, stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified.Make : Cera/Jaguar/Ess Ess.

S&F in repair Brass CP Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make : Cera/Jaguar/Ess Ess.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.Make : Cera Model F3002152 or eqult in Jaguar/Ess Ess

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star

S&F sink cock fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302)

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H).

Supply and fixed PVC Cabinet mirrorall as specified .(make Prayag or equivalent).

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.Make : Cera/Jaguar/Ess Ess.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.Make : Cera/Jaguar/Ess Ess.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&Fin repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.Make : Cera/Jaguar/Ess Ess

S & F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.(Min wt 105 gm).

S & F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

Supply and Fixing Stainless steel Toilet paper holder, mkae Jaguar Model AKP 35753P or equivalent all as specified and directed.

S&F stainless steel Soap dish fix to wall all as directed and specified.Make : Cera/Jaguar/Ess Ess

S&F Corner glass shelf large, 300x300mm of cera all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified.

S&F in repair brass CP Health faucet with 1.5m long flexible pipe and wall hook complete all as specified and directed.Make : Cera/Jaguar/Ess Ess

S&F in repair Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified.

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. ( Make :NIRALI,Blue star,Nilkhant)

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed.

PVC (SWR) pipes 75 mm single socketedwith in any length with rubber ring joints, laid in trenches or in floors and walls complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc complete all as specified and directed.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc complete all as specified and directed.

S&F CP grating size 100mm fixed with white cement all as specified.

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank complete all as specified and directed.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair complete all as specified and directed.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) complete all as specified and directed.

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms ) complete all as specified and directed.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed.

All as per item No 80 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed.(Note; manufacture MAXON,)

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed. (Note; manufacture MAXON,

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed.

S&F for aluminium handle 150mm cast type anodised all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed.

S&F MS 180mm (Powder coated) ordinary rat rail rod pattern springs incl roller and roller plate complete all as specified and directed.

S&F in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S&F Continuous(piano) hinges,brass ,bright finish of electrogalvanised 40 mm width of flap complete all as specified and directed.

Cover fillets of standard 6 mm thick ness hard board, 40mm wide,and fixing with screws complete all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed by Engineer-in-Charge

All as item 104 above but figured glass pin head type 4mm thick

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete all as specified and directed.(Note: Bracket will be measured and paid separately).

S& F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends complete all as specified and directed.

M&L for 20 mm thick Plastic kitchen cabinet with all accessories (Handle,Piano hinges,Magnet catcher telescopic channel etc Including 6mm thick plastic sheet back side of the kitchen cabinet of Make :Sintex or Equivalent) complete all as specified and directed.

S&F SS Basket 48 cm x 50 cm x 10 cm complete all as specified and directed.

S&F SS Basket 48 cm x 50 cm x 15 cm complete all as specified and directed.

S&F SS Basket 48 cm x 50 cm x 20cm complete all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement. Note:- supply only of water proofing compound will be measured and paid seperately under relevant item

Supply only approved integral water proofing compound, Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

Taking down the unserviceable point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling roses, pendent regulators, sockets etc any light points and making good distrubed surfaces of walls and floors etc. complete all specified and directed by Engr-in-Charge.

Taking down unserviceble DBs, with MCBs and Main switches all as specified and directed.

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing Exhaust fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M & L for Painting of Ceiling and Exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust etc.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concealed conduit in existing brick/stone wall for concealing conduit and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for the following: -

One light point controlled by one 5 Amps switch

One ceiling fan/Exhaust fan controlled by one 5 Amps switch

One socket 5 amp on independent board.

One socket 5 amp on Same Board with other switches.

One Bell Point controlled by one Bell Push

One light point controlled by two 2 way switch of 5 Amps.

All as per item No 127 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch.

Note for item No. 127 to 127.7 :- (a) The flush metal box and cover plate with frame for fixing modular switch/socket/regulator etc shall be measured and paid sepertately under relevant items of the schedule. (b) Cutting chases for routing conduit and making good as per the existing where ever necessary shall be measured and paid seperately.

M&L for point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS grade cable ISI marked in and including PVC casing - caping of suitable size medium grade ISI marked complete including 1.6 mm thick CI/pressed steel terminal switch boxes flush mounting type with plastic laminated sheet cover of 3.0 mm thick for fixing switch / socket/ regulator etc, including earth continuity wire of PVC insulated unsheathed 1.5 Sqmm (nominal cross sectional area) FRLS copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

One light point controlled by one 5 Amps switch

One ceiling fan controlled by one 5 Amps switch

One socket 5 Amp on independent board.

One socket 5 Amp on same board

M&L for point wiring complete with 2 run of 4.00 sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including rigid PVC conduit not less than 20mm dia and conduit accessories fixed to walls / roofs / floors / ceiling etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor FRLS 4 sqmm for earth continuity conductor and connected to common earth dolly for 20 Amps Metal clad socket omplete all as specified and directed.

Supply and fix switch piano 5 Amps flush type one way all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin, 5 Amps flush type all as specified and directed.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete all as specified and directed.

S & F Modular type stepped type electronic fan regulator 2 Module 230 Volts all as specified and directed.

Supply and fix modular type Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix modular type Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Bell ding dong AC 230 V complete all as specified and directed

Supply and fix modular white cover plate with frame, 1 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 2 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 1/2 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 3 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 4 module ISI marked complete all as specified and as directed.

Supply and fix modular flush metal box 6/8 module ISI marked complete all as specified and as directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including dismantling old unsv fittings complete all as specified and directed.

Supply and fix in repair LED, Tube light fitting 12 Watt, 2 feet long, 6500K self blasted LED batten, extruded thermoplastic body with PC diffuser in square shape CRI>80, beam angle 120 degree, surface mounted high and two round block for mounting tubelight fittings all as specified and directed by Engr-in-Charge. Make Polycab Cat No: LD00103028 or Equivalent in Wipro/Philips/Ledvance/ Havells/CG.

Supply and fix in repair round/square shape 15 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F fix in repair LED light fitting 10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair building security light LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection complete all as specified and directed by Engr-in-Charge.

M/L sub-main wiring with two runs of 6 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor in and including suitable PVC Conduit with 6 sqmm copper earth wire after taking out the existing sub-main wiring, etc all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Note:- Three Run of 6 Sq mm and PVC conduct is measured as one Run or one Meter.

Sub main wiring complete with two runs of 2.5 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and condit accessories concealed /fixed to walls/roofs/floors etc.., and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 2.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge. Note:- Two run of cable and one run of earth wire and PVC conduct is measured as one lenth. Note:- Three Run of 2.5 Sq mm and PVC conduct is measured as one Run or one Meter.

Supply and fix Sheet metal enclosure double door MCB DB SPN 16 way with 200 A rated bus bar & neutral link complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix single pole and netural encloser with a two pin and earth plug socket complete with one single pole MCB of 20 Amps all as specified and directed.

Supply and fix MCB Single pole and Neutral, 230 volts, 6 to 32 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge.

Supply and fix MCB Single pole and Neutral, 230 volts, 40 to 63 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repair MCB Single pole, 230 volts, 6 to 32 Amps, 'B' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe medium grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed by Engr-in-Charge.

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose, making good to match with the existing surface finishes complete all as specified and directed by Engr-in-charge.

Supply and fix Meter panel board made out of 14 SWG (2.0 mm) CRCA sheet powder coating for load bearing member & non load bearing member with aluminium busbar with colour coded heat shrinkable PVC sleeve and suport with current density 1/Sqmm, including all internal wiring will be done with PVC insulated copper of suitable size, space for single phase energy meter 5 Nos, including MCBs four pole 63 Amp - 01 No as incomer and MCBs SPN 40 Amp-05 Nos as a outgoings including taking old unserviceable meter board with connected items all as specified and directed by Engr-in-Charge. Make -M/s Maheshwari Power Controls or equivalent.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as specified and directed.