Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-Finance | ₹1.3 Cr | L1 | Accepted-Finance Lowest Bid |
| 2 | L2₹1.3 CrRejected-Finance PO POKHRIABONG 734216 DIST DARJEELING | DARJEELING | WEST BENGAL | 734216 | ₹1.3 Cr | L2 | Rejected-Finance Higher Bid |
| 3 | L3₹1.3 CrRejected-Finance | ₹1.3 Cr | L3 | Rejected-Finance Higher Bid |
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
13 Mar 2026, 6:55 pmClosed
Executive Engineer TED
OFFICE OF THE EXECUTIVE ENGINEER TAKDAH ENGINEERING DIVISION 6TH MILE NAYA BUSTY, DARJEELING-734222
CONSTRUCTION OF BUILDINGLESS PRIMARY HEALTH CENTRE UNDER XVFCHEALTH AT TAKLING PHC,TAKDAH UNDER R.R BLOCK GTA.
2026_GTA_1011550_1
GTA/EE/TED/NIeT-13(2nd Call)/e-Tender/2025-26
Open Tender
CIVIL WORKS
Percentage
270 days
Takdah
As per Niet
5 documents required · 5 mandatory
₹0
₹2.6 L
Yes
25 Jun 2026
20 Feb 2026
16 Mar 2026
20 Feb 2026
13 Mar 2026
20 Feb 2026
Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) Excess (+) Less (-)
Tender Inviting Authority: Executive Engineer, Takdah Engineering Division, GTA.
Name of WorK:CONSTRUCTION OF BUILDINGLESS PRIMARY HEALTH CENTRE UNDER XVFC-HEALTH GRANTS FOR THE FY 2023-24, AT TAKLING PHC,TAKDAH UNDER R.R BLOCK GTA
Name of the Bidder/ Bidding Firm / Company :
Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category
1 Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75m. Including stacking of steel bars. (a) Depth of excavation not exceeding 1.500mm Item1 40.27 cum Excess(+) Full Conversion INR
2 Dismantling all type of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed with in a lead of 75m in ground floor including roof. (a) Depth of excavation not exceeding 1.500mm Item3 13.02 cum Excess(+) Full Conversion INR
3 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed. (a) Depth of excavation not exceeding 1,500 mm. 115.92 cum Excess(+) Full Conversion INR
4 Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. 424.95 %cum Excess(+) Full Conversion INR
5 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work) b) With earth obtained by fresh excavation (including cost of excavation upto 1.800 mm depth) from land. 400.3 cum Excess(+) Full Conversion INR
6 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. cum Excess(+) Full Conversion INR
7 I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering (B) In ground floor (with N.B. Variety Stone metal) (a) (1:3:6) proportion 65.82 sqm Excess(+) Full Conversion INR
8 Plum Concrete work with 40% cement concrete with 30 mm down graded stone metal and 60% stone boulder of size 150mm and above,placed in position as directed excluding shuttering if any 224.077 sqm Excess(+) Full Conversion INR
9 Ordinary Cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes.24.423 (ii ) River Bazree 251.35 cum Excess(+) Full Conversion INR
10 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. 1794.93 cum Excess(+) Full Conversion INR
11 Brick Work with 1st class bricks in cement mortar (1:4). (b) In superstructure, ground floor. cum Excess(+) Full Conversion INR
12 125 mm th. Brick work with 1st class bricks in cement morter (1:4) in ground floor 535.48 sqm Excess(+) Full Conversion INR
13 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel. JSW/SHYAM (II) 23.68 MT Excess(+) Full Conversion INR
14 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.(ii) (a) with (4:1) cement morter (a) 20 mm thick plaster 2289.3 sqm Excess(+) Full Conversion INR
15 Neat cement punning about 1.5 mm thick in wall dado,window,sills floor,drain etc. NOTE: Cement 0.152 cum/100 sqm 427.14 sqm Excess(+) Full Conversion INR
16 Rendering the Surface of walls and ceiling with White Cement base. Add extra for each additional floor over the rate for ground floor for the item when used on 2993.68 sqm Excess(+) Full Conversion INR
17 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification. (b) two coats. ii) Solvent based interior grade Acrylic Primer 1412.56 %sqm Excess(+) Full Conversion INR
18 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface. In Ground Floor (b) two coats 429.6 %sqm Excess(+) Full Conversion INR
19 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) (i) Standard Quality sqm Excess(+) Full Conversion INR
20 Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia.and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos.screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge b) Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish: (vi) 100mm x 50 mm x 1.25 mm. Item19 each Excess(+) Full Conversion INR
21 Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile .The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of Item20 sqm Excess(+) Full Conversion INR
22 Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)b) 3 Track 3 Sash window frame of size 122 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm Item21 33.12 sqm Excess(+) Full Conversion INR
23 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using olymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all otherm incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (A) Deep Colour & White sqm Excess(+) Full Conversion INR
24 Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. sqm Excess(+) Full Conversion INR
25 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. sqm Excess(+) Full Conversion INR
26 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. no. Excess(+) Full Conversion INR
27 Iron Socket bolt of approved quality fitted and fixed complete. (b) 100mm long x 10mm dia bolt. no. Excess(+) Full Conversion INR
28 (ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with..(a) 200 mm long each Excess(+) Full Conversion INR
29 Anodise aliminium D-type handle of approved quality manufactured from extruded section (a) With continuous plate base (hexagonal/round (iv) 125mm grip x 10mm dia rod each Excess(+) Full Conversion INR
30 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (c) 40mm X 6mm, 125mm Length each Excess(+) Full Conversion INR
31 25mm. Thick damp proof couorse with cement concrete withstone chipp (1:1.5:3) [with graded stone aggregate 10mm nominal size] and admixture of water proofing compound as per manufacturers specification followed by two coats of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately). ( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C). sqm Excess(+) Full Conversion INR
32 Land Development Earthwork in cutting to form road section in corect profile including removal of spoils not exceeding initial lead of 50m and initial lift of 1.5m (mode of measurement: pre work and post work) (iii) In mixed hard soil (i.e hard moorum and soil containing laterite and boulders which do not require blasting) cum Excess(+) Full Conversion INR
33 Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. %cum Excess(+) Full Conversion INR
34 Plum Concrete work with 40% cement concrete with 30 mm down graded stone metal and 60% stone boulder of size 150mm and above,placed in position as directed excluding shuttering if any (i) (1:3:6) proportion cum Excess(+) Full Conversion INR
35 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. sqm Excess(+) Full Conversion INR
36 Providing weep holes in Brick masonry/ plain/ reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1v:20H towards drawing face. Complete as per drawing and technical specifications. each Excess(+) Full Conversion INR
37 Sanitary & Plumbing Works Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size each Excess(+) Full Conversion INR
38 Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). (i) 580 mm long each Excess(+) Full Conversion INR
39 Supplying, fitting and fixing Anglo-Indian W.C in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc (b) With 'S' trap (with vent) each Excess(+) Full Conversion INR
40 (A) Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.) each Excess(+) Full Conversion INR
41 Fittings of Ambulant Disabled Toilet a) Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.) each Excess(+) Full Conversion INR
42 Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.) each Excess(+) Full Conversion INR
43 Supplying, fitting and fixing Stainless steel Wall Mounted Grab Bar. Load bearing capacity 150 kg, covered by Nylon surface with contour finish (for better grip) with Anti-bacterial surface complete. (Model Code No. B2210106 of CERA or equivalent.) 600mm Long each Excess(+) Full Conversion INR
44 Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets. (Model Code No.B2210108 of CERA or equivalent.) 750 mm long each Excess(+) Full Conversion INR
45 Supplying, fitting and fixing 15 mm Twin Flush Fitting (Model Code No. B1810112 of CERA or equivalent). each Excess(+) Full Conversion INR
46 Supplying, fitting and fixing 15 mm Spatula Single Lever Basin Mixer (Model Code No. F9030451 of CERA or equivalent). each Excess(+) Full Conversion INR
47 Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make without fittings and brackets. White each Excess(+) Full Conversion INR
48 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length. (c) 160 mm mtr Excess(+) Full Conversion INR
49 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (B) Under ground. (iii) 160 mm dia. each Excess(+) Full Conversion INR
50 Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar(4:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete(1:6:3) with stone chips over a layer of jhama brick flat soiling, 15 mm thick (1:4) cement plaster to inside walls and outside walls upto G.L. and 20 mm thick(1:4) plaster to bottom of the pit, providing necessary invert with cement concrete(1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils. after work complete in all respect with all costs of labour and materials. with Bazree (N.B Variety). (TATA/SAIL/RNAIL) each Excess(+) Full Conversion INR
51 Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia. R.C.C. manhloe cover of approved make supplied, fitted and fixied in the top slab with necessary fittings, 19 mm thick cement plaster(4:1) with neat cement finish to the internal surfaces and 12 mm thick plaster(4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, fliing up the chamber with clear water, removing foreign materialsfrom the chamber and including constructing attached inspection pit as per approved dawing and connecting all necessary pipes, joints etc. with internal plaster work and artif ii) for 30 users. (b) with Bazree (N.B Variety) each Excess(+) Full Conversion INR
52 Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work(6:1) band all round and cement brick work(6:1) upto 0.90 metre from top with 19 mm thick cement plastering(4:1) to inside face upto the depth of cement brick work, 12 mm thick cement plaster(4:1) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal(50 mm to 63 mm size) including R.C.C. cover slab of designed thickness with cement concrete(4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe conections, excavation of well including shoring, dewatering and remeving the excess earth from the premisis as per direction complete in all respect with all costs of labour and materials .a)With 250 mm thick dry brick work and 250 mm thick cement brick work(6:1) and 1.00 m. inside dia. each Excess(+) Full Conversion INR
53 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (a) (i) 15 mm dia. light quality mtr Excess(+) Full Conversion INR
54 (A) For Exposed Work (a) (i) 25 mm dia. light quality mtr Excess(+) Full Conversion INR
55 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer each Excess(+) Full Conversion INR
56 Supplying, fitting and fixing brass ferrule including connection with G.I. pipes of TATA make of following dia. and upto 450 mm long with screw, jamnut, sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge. (iii) 15 mm dia. each Excess(+) Full Conversion INR
57 Roof top rain water harvesting tank Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1.500 mm. %cum Excess(+) Full Conversion INR
58 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work) b) With earth obtained by fresh excavation (including cost of excavation upto 1.800 mm depth) from land. %cum Excess(+) Full Conversion INR
59 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. sqm Excess(+) Full Conversion INR
60 I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering (B) In ground floor (with N.B. Variety Stone metal) (a) (1:3:6) proportion cum Excess(+) Full Conversion INR
61 Ordinary Cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. (ii ) River Bazree cum Excess(+) Full Conversion INR
62 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. sqm Excess(+) Full Conversion INR
63 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.For works in foundation, basement and up to roof of ground floor/up to 4m. SAIL/TATA/RINL 0.20000 MT Excess(+) Full Conversion INR
64 Constructing Inspection pit of inside measurement 600mm X600mm X upto 600mm(depth) with 250 mm thick 1st. Class brick work in cement mortar(4:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete(1:6:3) with stone chips over a layer of jhama brick flat soiling, 15 mm thick (1:4) cement plaster to inside walls and outside walls upto G.L. and 20 mm thick(1:4) plaster to bottom of the pit,providing necessary invert with cement concrete(1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings,necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils. ii) With Bazree (N.B Variety) each Excess(+) Full Conversion INR
65 Supplying, of PVC pippes and fittings and fixing medium duty 32 mm dia mtr Excess(+) Full Conversion INR
66 Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) (ii) 560mm dia each Excess(+) Full Conversion INR
67 Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials.(b) With 900 mm.dia. well. each Excess(+) Full Conversion INR
68 Parking Area & Horticulture Work Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed sqm Excess(+) Full Conversion INR
69 Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1.500 mm. %cum Excess(+) Full Conversion INR
70 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) cum Excess(+) Full Conversion INR
71 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand sqm Excess(+) Full Conversion INR
72 I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering (B) In ground floor (with N.B. Variety Stone metal) (a) (1:3:6) proportion cum Excess(+) Full Conversion INR
73 Ordinary Cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes.24.423 (ii ) River Bazree cum Excess(+) Full Conversion INR
74 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. sqm Excess(+) Full Conversion INR
75 Brick Work with 1st class bricks in cement mortar 250mm thick (1:6). (i) In foundation and plinth cum Excess(+) Full Conversion INR
76 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement sqm Excess(+) Full Conversion INR
77 Supplying and stacking of good earth (adequate for horticulture work) at site including royalty (earth measured in stack will be reduced by 20% for payment) cum Excess(+) Full Conversion INR
78 Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake form from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%). cum Excess(+) Full Conversion INR
79 Spreading of sludge, dump manure,/farm yard manure/animel dung manure and good earth in required thickness. This includes supply of labour, tools & plants excluding materials. sqm Excess(+) Full Conversion INR
80 Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) sqm% Excess(+) Full Conversion INR
81 Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. xxvii) Areca Palm 4 - 5 suckers of height 120 cm to 135 cm in earthen pots of size 25 cm. each Excess(+) Full Conversion INR
82 iv) Rangon hi-breed healthy plant. each Excess(+) Full Conversion INR
83 xvii) Bougainvillea (mix variety) of height 30cm-90cm in polybag of size 10cm-15cm each Excess(+) Full Conversion INR
84 Common Collection Site Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75m as directed sqm Excess(+) Full Conversion INR
85 Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1.500 mm. %cum Excess(+) Full Conversion INR
86 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. %cum Excess(+) Full Conversion INR
87 A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) %cum Excess(+) Full Conversion INR
88 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. sqm Excess(+) Full Conversion INR
89 Ordinary Cement concrete ( mix 1:2:4) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. cum Excess(+) Full Conversion INR
90 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. sqm Excess(+) Full Conversion INR
91 Ordinary Cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes.24.423 (ii ) River Bazree 12.44 cum Excess(+) Full Conversion INR
92 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel 1. JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL 0.999 MT Excess(+) Full Conversion INR
93 Brick Work with 1st class bricks in cement mortar (1:6).(a) In foundation and plinth cum Excess(+) Full Conversion INR
94 (a) In foundation and plinth(b) In superstructure, ground cum Excess(+) Full Conversion INR
95 125mm. Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor sqm Excess(+) Full Conversion INR
96 Labour for chipping of concrete surface before taking up plastering work sqm Excess(+) Full Conversion INR
97 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] 20mm thick outside plaster with (1:6 cement morter) sqm Excess(+) Full Conversion INR
98 15mm thick inside plaster (with 1:6 cement morter) sqm Excess(+) Full Conversion INR
99 10mm thick (1:4) ceiling sqm Excess(+) Full Conversion INR
100 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement cum Excess(+) Full Conversion INR
101 (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] 0.000 sqm Excess(+) Full Conversion INR
102 Neat cement punning about 1.5 mm thick in wall dado,window,sills floor,drain etc. NOTE: Cement 0.152 cum/100 sqm in proportion ( 1 bonding agent : 4 water : 6 cement) as per manufaacturers specification [Cement to be supplied by the department] 0.000 sqm Excess(+) Full Conversion INR
103 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0kg/Sq.m] sqm Excess(+) Full Conversion INR
104 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. (a) Area of each tile upto 0.09 sqm. (ii) Coloured decoractive sqm Excess(+) Full Conversion INR
105 M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed. In ground floor 0.000 Qntl. Excess(+) Full Conversion INR
106 Supplying fitting and fixing steel rolling grills link type, shutter with 18 B.G .of approved type steel to the section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. sqm Excess(+) Full Conversion INR
107 Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor. (b) 25mm mesh sqm Excess(+) Full Conversion INR
108 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two Coats sqm Excess(+) Full Conversion INR
109 Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 0.000 sqm Excess(+) Full Conversion INR
110 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc 0.999 sqm Excess(+) Full Conversion INR
111 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white) sqm Excess(+) Full Conversion INR
112 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (b) for concealed work 15mm dia mtr Excess(+) Full Conversion INR
113 25mm dia mtr Excess(+) Full Conversion INR
114 40mm dia mtr Excess(+) Full Conversion INR
115 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concretetructures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110mm dia (Rain water) Mtr Excess(+) Full Conversion INR
116 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110mm dia (Rain water) a)Plain Tee (ii) 110mm Dia each Excess(+) Full Conversion INR
117 b) Plain Y (ii) 110mm Dia each Excess(+) Full Conversion INR
118 d) Shoe (ii) 110mm Dia each Excess(+) Full Conversion INR
119 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 liter capacity each Excess(+) Full Conversion INR
120 Labour for hoisting plastic water storage tank. (i) Upto 1500 liter capacity (a) Upto 1st storey from G.L 0.000 each Excess(+) Full Conversion INR
121 Labour for punching hole in plastic water storage tank upto 50 mm dia 0.000 each Excess(+) Full Conversion INR
122 Supplying, fitting and fixing pillar cock of approved make. (a) (i) CP Pillar Cock - 15mm (Equivalent to Code No. 507 & Model - Tropical / Sumething Special of ESSCO or similar brand). sqm Excess(+) Full Conversion INR
123 DG Set Foundation Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. 4.08 %cum Excess(+) Full Conversion INR
124 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. sqm Excess(+) Full Conversion INR
125 A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. 0.000 cum Excess(+) Full Conversion INR
126 Cement concrete (1:3:6 proportion) with graded stone ballast (40mm, size) excluding shuttering. (B) N.B. Varity stone matel 0.999 cum Excess(+) Full Conversion INR
127 Ordinary Cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. (ii ) River Bazree cum Excess(+) Full Conversion INR
128 Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. sqm Excess(+) Full Conversion INR
129 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel 1. JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL MT Excess(+) Full Conversion INR
130 Brick work with 1st class Bricks wit cement morter (1:6) (a) in foundation and plinth cum Excess(+) Full Conversion INR
131 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. a) 20mm thick plaster (6:1) sqm Excess(+) Full Conversion INR
132 Add 18 % GST 0.000 Each Excess(+) Full Conversion INR
133 Add 1 % Laboaur Cess 0.000 Each Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
BOQ_2483962.xls
BOQ • 0.43 MB
TenderForm2.pdf
Tender Documents • 0.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].