REPAIR /REPLACEMENT OF FLOOR, WALL, ROOF SHEET, WALL AND FLOOR FINISHES, JOINERY ITEMS, PLUMBING, ROOF TREATMENT AND CERTAIN MISC MAINT AND REPAIR IN MD AND OTM ACCN OF 5682 ASC BN (MT), 102 (TA) BN AT MIL STN KALKA UNDER GE JUTOGH

Amount

Taking down of cement plaster on walls and ceiling of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 with using wpc mixing properaly as per mfd instruction on the walls , floors, parapet walls , chhajas, and other structural parts of bldg and finished even and smooth without using extra cement complete all as specified and directed.

M/L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Primer over chalk whitening complete all as specified and directed

M & L for preperation of new plastered surfaces applying two coats of cement base paint over one coat of primer complete all as specified and directed

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing ,scraping down smoke soot, moulds moss and efforescene salts ,trading oil , greasy spots and applying one coat of white wash complete all as specified and directed

M&L for preparation of plastered or unplastered old decorated surfaces on ceilings etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and grease spots, washing etc and applying one coat of white wash complete all as specified and directed

M& L for preparation of old surfaces of walls including brooming down or steel wire brushing ,scraping down smoke soot, moulds moss and efforescene salts ,trading oil , greasy spots and applying two coat of white wash complete all as specified and directed

M&L preparation of old plastered or unplastered wall surfaces by brooming down with wire brush and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat distemper oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, preparation of surfaces for applying 3mm wall care putty on wall complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L 4mm thick non asbestos fibre cement building boards white/off white (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding and, removing and rubbish off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 including roughing of old pcc/terrazo floor surfaces by any means preparatory to receive floor finishes complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat with cement mortar 1:4 complete including taking down existing tiling/plaster etc complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 15mm thick screed bed with cement mortar 1:6 completeincluding dismentling of exiting tiles/terrazzo toping etc complete all as specified and directed.

M&L for Glazed ceramic colored tiles on verticle surface such as skirting/dado etc. 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.all as directed as specified . Including 10 mm thick plastering in CM 1:4 complete all as specified and directed..

M & L for 75mm thick PCC 1:4:8 , type D2 ( using 40 mm graded crushed stone aggregate) as in sub base under floors, surface finished even and fair to receive top finish, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Gradewith grey cement and pigment, laid over and including 40 mm thick (average) stone dust cushioning and joints filled with sand complete all as specified and directed.

Demolition of B work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

M & L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site to store complete all as specified and directed.

S&F Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete including making good the distrurbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete including making good the distrurbed surfaces complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified size 125 x 60 including filling with PCC 1:3:6 complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified size 105 x 60 including filling with PCC 1:3:6 complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F poweder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side refelctive glass and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter as under complete and all as specified and directed (I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7mm thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER (x) Hold fast aluminium 100mm long (xi) 1 Nos Floor door spring each shutters (xii) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 91.50 x 31.75 x 1.3mm thick for top and sides, 91.50 x 31.75 x 1.2mm thick, bottum and shutter frame 38 x 18 x 1.5mm thick, Aluminium grill 6 mm dia design No. DG-102 make DEDO grill or design No. A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts etc. complete all as specified.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in the same opening after repair etc complete all as specified and directed.

S & F 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated of 2nd class hardwood rails and style for doors complete all as specified incl one shop coat of pink primer complete all as specified and directed.

M &L 35 mm thick Glazed & skeleton shutters ,open rebated & prepare to receive gauge. Divided into squares ,with plain ,chamfered and rounded,mitred and rebated sash bars ,any numbers(35mm thick shutter) complete all as specified and directed.

S&F 100 mm long medium weight stainless steel but hinges complete all as specified and directed.

S&F 150 mm long stainless steel handle complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 250 mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stainnless steel and fixing bolt and sliding bolt complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in bed block for hold fast etc. complete all as specified and directed.

S & F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane.

S& F galvanised mild steel wire cloth 0.56mm nominal dia or wire and average width or aperture 1.18mm and fixed with stainless steel wire staple in complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of S/E paint to wooden surface inc one coat of pink primer complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length, with rubber ring joints, laid in trenches or under floors, inserted in retaining wall etc complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified and directed.

PVC (SWR), junction single, (Single T) equal or unequal with access door 75 mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified

S & F galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size 15mm bore complete all as specified .

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 20mm bore pipe complete all as specified and directed.

S & F galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size 20mm bore complete all as specified and directed.

Re-fixing old steel tubing 20 mm dia and connections in new or old positions, complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F CP brass mixer with Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed.

S&F in repair chromium plated Pillar tap, cast copper alloy with capstain head, screwed down high pressure with long screwed shank and fly nut complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crtuch or butterfly handle capstan head screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S & F in repair stop/angle valve of 15mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S & F in repair bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule of size 15mm bore fixed as in repairs complete all as specified and directed.

S & F in repair brass chrominum plated shower rose 100mm size with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S & F in repair viteous china floor mounted elongate shape western type EWC of size 17cmx39cmx36cm starwhite with `p' or `S' trap, front or back inlet and (exclusing flushing cistern and flush pipe) incl PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including bracketscomplete all as specified and directed.

S & F PVC connection 15mm size with PTMTnuts of length 450mm complete all as specified and directed.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F in repair Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F Hasp and staple, safety type of aluminium anodised including bolt to hinge plate, fixed with screws of 100mm size complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

Dismentling of existing roof trearment like laying bricks/mud fuska/tarfelt/pcc etc complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerb or mud stopes, padding on roof etc finished even and fair,average thickness 40mm to maintain proper slope complete all as specified and directed.

M/L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces

supply only Integral water proofing compound complete all as specified and directed.

M&L for cleaning of old roof slab surfaces including sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane as under :- (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) M&L applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required. (d) Applying aluminium paint @ 0.20kg/sqm.

S&F aluminium section powder coated of colour as approved for partition consisting of with Frame 62x40x2mm and partially glazing with 5.5mm thick plain/ colour glass and partially with PVC board 5mm thick fixed with aluminium beading, joining cleats, glazing clips 0.7mm thick, rubber packing complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR), Junction double, (double T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), Junction double, (double T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), bends with access door complete all as specified and directed.

S&F in repair 125/110mm bore, PVC (SWR), 'P' or 'S' trap complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.

S&F in repair salt glazed stoneware gully trap 125 x 100 mm, type P setting and jointing with solvent, cement complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in concrete bed to 110mm dia drain pipe including forming cradles, complete all as specified and directed.

R. P. Suppliers and Construction Co.

m/s jupiter builders

AAR PEE ENTERPRISES

NAVREET CONSTRUCTION