Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹29.7 L+₹5.2 L (21.1%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹30.7 L+₹6.1 L (24.9%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹30.9 L+₹6.4 L (26.0%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹31.8 L+₹7.2 L (29.4%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
31 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI PRAVEEN KUMAR, IDSE
GE KHADAKWASLA, NDA KHADAKWASLA, PUNE-23
REPAIR/MAINTENANCE TO PATHWAY PARKING SHED AND OTHER MISC WORK B/R WORKS IN CENTRAL AMENITIES AT NDA KHADAKWASLA
2023_MES_607012_1
8741/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHADAKWASLA
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE KHADAKWASLA
₹98,000
Yes
27 Sept 2023
30 Jun 2023
2 Aug 2023
30 Jun 2023
31 Jul 2023
19 Jul 2023
30 Jun 2023 - 18 Jul 2023
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in Concrete, brick work,masonry, etc. portion and making good disturbed ground complete as specified and directed
Demolition of cement concrete unreinfored in ground floor not exceeding 15cm thickness below or above ground level and removing all debries out side of MOD Land complete all as specified and directed
Demolition of Cement concrete of any description and in any position not otherwise specifically provided for incl rubbish off outside of MD land complete all as specified and as directed.
M&L for cement concrete type B2 (1:2:4) using 20mm size graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed
Dismantling mild steel work of any description and in any position complete all as directed
Mild steel bolt or eye foundation bolt exc 12 mm and n exc 20 mm dia purpose made inserted in concrete more than 200 mm deep . with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed
M&L for MS posts and struts for Car shed and Octagonal/ dodecagonal Gazebo including cutting tops to shape as directed, drilling holes, notching for wire, including embeded in concrete all necessary welding, drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for steel work in tubular trusses Ornamental and integrated design for conical/ dodecagonal Gazebo type roof (pattern approved by GE) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.
M&L for steel work in roof trusses and tubular purlins (framed), trussed, crane gantries, rails and fastenings and heavy bracket, (framing of tubular rails, purlins,and rafter,Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc for Ornamental and integrated design approved by GE for conical/ dodecagon Gazzibo type roof” grade Fe-410-W Quality A complete all as specified and directed.
M&L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) gde D-5 and setting in CM (1:6).including Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast PCC Block, complete all as specified and directed.complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches if ordered complete all as specified and directed
Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall complete all as directed and specified.
Dismantling of stone slabs,cudappah, parking tiles of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and directed
M&L for broken hard core gauge, n exc 63mm deposited spread and leveled in layers n.exc 15cm thick water and rolled/rammed true surfaces( for raising of base) complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 (Using 20mm graded stone aggregates) as in Levelling course complete all as specified and directed
M&L for 25mm thick PCC 1:2:4 type B1 using 12.5mm graded aggregates as in Levelling course including liquid waterproofing compound complete all as specified and directed.
M&L for outdoor Parking tile matt finish(400 mm x 400 mm x 10-12 mm thick , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM (1:6) Breaking strength not less than 1600 N and M O R not less than 35 N/mm^2 complete all as specified and directed.
M&L for granite in floor (of any type , any size and any colour ) slab 16-18 mm thick area exc 0.09 sqm and not exc 1.00 sqm machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick screed bed in CM (1:4) etc complete all as specified and directed.
M&L for granite (of any type , any size and any colour ) slab 16-18 mm thick area exc 0.09 sqm and not exc 1.00 sqm machine cut, in skirting/ dado jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10 mm thick plaster in CM(1:4) as a backing coat etc complete all as specified and directed
M&L for moulding/rounding to edges in semi circular shape granite ,lakha red of stone slabs one edge, such as in steps, cooking platform, and other similar situations match to existing surface all as complete all as specified and directed.
S&F galvanised, corrugated mild steel sheeting 0.80 mm thk with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc including racking cutting and waste on sheet. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete including taking down of u/s existing all as specified and directed
S&F plain, galvanised, mild steel sheeting, 0.80 mm thk in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete ncluding taking down of u/s existing all as specified and directed.
M&L for preparation and painting to new steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall with plain or semi-circuler shape, fixed with self tapping screws complete ncluding taking down of u/s existing all as specified an directed
Demolition of brick work or stone buillder or block masonry built in cement mortar of any description complete as directed.
M&L for brick work with sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar (1:6) etc complete all as specified and directed.
M&L for 35mm thick Dholpur sand stone of red colour cladding for Gate/vertical surface/wing wall gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade -202) of flat-30mm X2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener polishing, rubbing & including silicon treatment to joint of Dholhpur Stone is considered to avoid the water penetration in to cladding and also to avoid hydration mark on cladding which will spoil the elevation over and including cement screed bed/backing layer 15mm thick in CM (1:3) etc complete all as specified and directed.
M&L for 25mm thick black sand stone cladding for bottom portion of gate pillars/wing wall/vertical surface gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade -202) of flat-30mm X2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener polishing, rubbing & including silicon treatment to joint of Dholhpur Stone is considered to avoid the water penetration in to cladding and also to avoid hydration mark on cladding which will spoil the elevation over and including cement screed bed/backing layer 15mm thick in CM (1:3) etc complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) on brick/ concrete surfaces of walls including floating coat using water proofing compound as per Manufacturer's Instructions complete all as specified and directed Note : WPC shall be measured and paid separately.
M&L for Preparation of newly plastered surface and Finishing walls with premium Acrylic Smooth exterior paint with Silicone additives of required shade, New work (Two coats applied @1.43 ltr/10 sqm over priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed
M&L for 100mm thick cement concrete type D2, (1:4:8) (Using 40mm graded stone aggregate) as in sub base including use of necessary form work etc complete all as specified and directed .
M&L in replacement of Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed.
Demolition of kerb stone/boulder masonry, precast articales fixed on compound wall pillar laid dry or in cement mortar complete all as specified and directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc complete all as specified and directed.
M&L for preparing new concrete surfaces, stone,kerb stone surfaces of any description not otherwise over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink /white primer complete all as specified and directed
Supply only water proofing compound as per relevant IS complete all as specified and directed.
Excavation in post holes (Or similar holes) in soft/disintegrated rock each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceesding 25cm complete all as directed.
SUN Enterprises
OM GANESH CONSTRUCTION
ELIEYAS TRADERS
M/S Narendra Construction
AMW Construction and developers
M/S, J.K.CONSTRUCTION
Bharekar Construction
Sunil Constructions
Sayili Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .