WELCOME MAINT INCLUDING CERTAIN MISC BR WORK IN DHIMAN, JOSHI ENCLAVE AND SINGLE LIVING OFFRS ACCN AND REPAIR TO SUNKEN TILING, FLOORING, JOINERY, PLUMBING, PLASTERING, PAINTING ETC IN QMQS, SINGLE LIVING, OFFRS ACCN, OFFRS MESS, at AF stn Utarlai

Amount

M&L for rendering 15 mm thick in CM 1:6 on stone masonry/concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement and Including taking down old plaster including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry/concrete surfaces/ brick / PCC block surface,Finished even and fair without using extra cement and Including taking down old plaster including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement and Including taking down old plaster including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash.

Material & Labour for complete removal of existing treatment of wall of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying two coat of white wash on wall all as specified.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying one coats of white wash.

M & L for complete removal of existing treatment on ceiling and applying two coats white wash complete all as specified

Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including removing of undesired nails and filling the holes, undulations etc with putty and applying one coat of oil bound distemper, white or tinted complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coat of oil bound distemper, white or tinted over a coat of primer incl filling of wall putty in holes, undulated area etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of avg. thickness 1.5 mm of wall care putty complete all as specefied and directed by Engr-in charge .

Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for applying one coat of cement base paint including preparation of old decorated or old plastered surfaces of wall / column / roof projection / chajja / facia complete all as specified.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins./springs clips complete all as specified and directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane.

ditto- all as per item No. 19 above but 5.00mm thick and area exc 0.5 Sqm each pane

S & F Continuous (piano) hinges, mild steel of width of flap 30 mm complete all as specified and directed

Supply & Fix as in repairs 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed

S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.

Supply & Fix as in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed

Supply & Fix as in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.

Supply & Fix as in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placed complete as in built in shelves, cabinets partions etc including dismantling of old board. complete all as specified and directed.

S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished.

S&F in repair Butt hinges,100 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type complete all as specified and directed.

Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed

S&F in repairs bath PVC cabinet mirror of size 350x450 mm complete all as specified and directed

S&F in repairs stainless steel Kitchen plate rack of size 31”x36”x10”and 1mm thick complete all as specified and directed

S&F in repairs Towel rack of size 600 mm of grade 304 complete all as specified and directed.

S& F in repairs 150mm ordinary rat rail rod pattern springs heavy duty including roller and roller plate fixed with screws or welding complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobs fixed with nut,screw and washers of mild steel,bright finished.

S&F in repairs first class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads from site.

Taking down chowkats or frames with shutters (Without taking off shutters from the frame) n.exc 1.5 sqm each.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

M & L for welding in repairs n exc 2.5 cm in length of any thckness metal to be welded in windows /gates/chowkhats etc . complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.

S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.

S & F 100mm size mild steel butt hinges medium weight cold rolled mild steel 100mm long.

S&F Aluminum tower boltes of extruded section of size 150mm complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

Supply & Fix 150 mm long extruded aluminium alloy handles, fabricatee type anodised complete all as specified and as directed

S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.

S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.

S&F for galvanised steel tubing 15 mm dia (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls including taking down old GI Steel tubing with connections of same dia etc complete all as specified and directed

All as per item No 57 above but 20 mm dia

All as per item No 57 above but 25 mm dia

Relaying/refixing of old steel tubing 15 mm dia including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends including taking down old steel tubing and connections , fittings including cleaning for refixing the same etc compete all as specified and directed.

All as per item No 60 above but 20 mm dia

All as per item No 60 above but 25mm dia

Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth

S&F in repair 15mm bore bib tap standared of PTMT any colour high pressure screwed for iron pipe and fixed, Minimum weight 90gms)

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated , fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs 15mm dia CP WHB mixer chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia wall mixer, chromium plated with telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia CP sink mixer chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F In repairs PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density in repairs. (including dismantlling of half turn valve 32 mm of any description , if required)

Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying two coat of damp proof to arrest DAMPNESS on wall/ceiling all as specified by manufacturer.

S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified.

S&F in repairs chromium plated Jet spray with chromium plated finish including complete accessories complete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.

Cleaning and removing all scale and dirt etc of storage water tanks of capacity exc 250 ltrs but n exc 500 ltrs including cleaning of mouths of circulating pipes by applying bleaching powder and brushing with wire brushes taking out all scales etc cleaning of tank with fresh water, flushing out disinfecting of tank with potassium permaganate 2% solution till stored in tank become clear including writing date of cleaning in DD-MM-YY Format in block letters all as specified and as directed

All as item No 83 above but tank of capacity exc 500 ltrs but n exc 1000 ltrs

S&F in repairs 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.

S& F in repairs brass chromium plated health faucet of approved make and standared size with necessary chromium plated finish flexible pipe of min length 1.0 mtr inlcuding all other arrangements of 15mm bore and fixed complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs CP towel ring of approved make all as specified and directed.

S&F in repairs straight 5.50mm thick front sheet glass shelf 600 mm long and 120mm wide with Cromium plated railing , mounted on decorative chromium plated bracket, assembly set complete all as specified and directed.

S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.

S&F in repair choromium plated soap dish complete all as specified and directed.

S&F in repair choromium plated toilet paper holder complete all as specified and directed.

M&L for granite(of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in CM 1:6.including demolition of old stone slab laid bedded and pointed in any mortar complete all as specified and directed.

M&L for rounding to the edges of granite stone slabs for kitchen platform and window cills etc complete all as specified and directed.

S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms )

Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.

Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/false ceiling /slabs/wall panelling blankets, any thickness, including cover fillets and framing complete

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm all as specified.

S&F GI snap grid frame work for Calcium, silicate false ceiling as per site requirement complete all as specified & directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F Providing and fixing Gypsum Board 8-10 mm thick laminated with pvc decorative type sheet at one face and Pvc film on another face in ceiling fixed with screw as per manufacturers instructions complete all as specified

S & F Solid PVC Wall Lining consisting of 5mm thick one side Pre laminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

S & F Seamless calcium silicate ceiling madeout of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish

M & L for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed.

Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with "P" or "S" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge .

S & F in repair 15mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed.

S&F 18/19mm WPC board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboards, alimirah shutters or other places complete all as specified and directed. (Sample like colour shall be as approved by GE)

S&F 100mm size stainless steel handle with stainless steel screws fixed to kitchen cupboards / drawer complete all as specified and directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specifierd and directed.

M & L for repairing of aliminium door to provide smooth mechanism of opening including all req material such as screw, rubber / aluminuim packing /glass tightening etc complete all as specified and directed

S&F in repair stainless steel telescopic Nickel chrome plated finish ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall beApproved by GE.

S&F stainless steel telescopic Nickel chrome plated finish ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall be Approved by GE.

S&F in repair 2.0mm thick stainless steel grade 202 cutlery tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 2.0mm thick stainless steel grade 202 cup and saucer tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 5.0mm dia stainless steel grade 202 thali basket / tray with chrome nickle finishes each size 450mm x 500mm x 200-300mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in reapir, 2mm thick stainless steel grade 202 plate basket / tray perforated type with partition if required for glass and bowl storage with chrome nickle finishes each size 450mm x 500mm x 200-300 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F 3way 3D hydraulic auto adjustable (Soft closed) concealed cabinets hinges stainless steel grade 202 with chrome nickle finishes each size 116x60mm mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm or 450 x 300 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Supply & Fix in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average widht of apeture 1.18 mm complete all as specified

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

M&L for polished machine cut kota stone as in slab flooring 20-25 mm thick single piece of each fread over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) including demolition of old stine slab complete all as specified and as directed

M&L for spl treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled inc filling of lean conc 1:5:10

S&F factory made flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters .

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

All as per Sl item 61 above but of size 75 X 60 mm as in cupboard frames.

S & F for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165.

S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

S&F fixed type anodised aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.

S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and lower panel including rubber gasket, aluminum beading compete all as directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection all as specified.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts including making good to the disturbed portion complete all as specified and directed.

M & L rendering 15 mm thick in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement and including application of two coats of Dr fixit or equivalent SBR latex slurry solutionmixing with cement for water proof surface of sunken (as per manufacturer's instruction) Note :- WPC shall be measured & paid sepuretely.

Supply only intergral water proofing compound.

M & L PCC 1:5:10 type D2 (using 40mm graded stone aggregate) all as specified and directed

Dismantaling of water tanks capacity exc 250 ltr & n.exc 500 ltr and removing to store

Ditto all as per item No. 77 above but exc 500 Ltrs and n.exc. 1000 Ltrs capacity.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars,covers, jafri jali etc. and removing from site all as specified and directed.

Providing precast cement concrete louvres and jallies (Type B1 1:2:4 (12.5 mm graded aggregate), 35 mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4.

Demolition of stone/brick / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L PCC for 20cm thick precast cement concrete Type C1 1:3:6, block masonry with solid block, set in CM 1:6 all as specified & as directed.

S&F in repair cast iron floor trap,nahani traps 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.

All as per item No. 85 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.

S&F in repairs branch pieces single 'T' 100 mm bore equal or unequal with oval access door

S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured).

S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).

S&F in repairs 100 mm CI connection socket to fit out let of WC

S&F in repair 100 mm bore cast iron bend (any radius) with / without duck’s foot or heel rest.

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 75 mm (internal dia) set in cement mortar .

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 100 mm (internal dia) set in cement mortar .

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches /floors fixed to walls complete all as specified and directed by Engineer-inCharge.

M&L PCC Block masonry with solid block 10cm in width in PCC 1:3:6 type C-1 using 20mm graded stone aggregate and setting in CM 1:4 complete all as specified.

S&F in replacement switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F in replacement socket multipurpose 5 pin, 6/5 Amp piano flush modular type, 240 Volts complete all as specified & directed.

S&F in replacement switch piano flush modular type , single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed.

S&F in replacement socket 2 in 1, 3 pin, 16/15 Amp flush modular type (ISI marked), 240 Volts complete all as specified & directed.

S&F in replacement lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

S&F in replacement ceiling rose, surface bakelite, three terminals modular type complete all as specified & directed.

S&F in replacement Bell push piano modular type (2 module) one way 6 Amp, 240 volt complete all as specified & directed.

S&F in replacement Bell electric Ding dong AC 240 volt, 50 HZ complete all as specified & directed.

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(4 module)

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(6 module)

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(8 module)

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(12 module)

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

S&F in replacement LED tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

S&F in replacement Light mirror light fitting 2' long, 10/8 Watt single phase 230 V, metallic decorative type, flexible in light position with extruded heat shrink complete all as specified and directed.

S&F in replacement LED inverter lamp 12 watt, CDL, B-22 cap, (Pin type), 230 Volt,PF not less than 0.85(min) complete all as specified and directed.

S&F in replacement wall mounted decorative ornamental type light fitting complete with driver, holder, LED lamp 8/10 Watt 02 Nos including connecting up with three core flexible copper conductor cable of suitable size complete incl dismentling taking down unsv fitting any type comple all as specified and directed.

S&F round shaped recess/surface suspended mounted slim fit down lighter having latest edge lit LED technology environment friendly, 18 watt complete with driver and all accessories and including connecting up to with two core copper flexible conductor up to with two core copper flexible condotor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge.

S&F recessed mounted POP-UP LED downlight 10 watt with 355 degree rotation and 90 degree tilt for directional adjustment, High efficiency COB used with better product efficacy 95 LPW.THD<10% complete all as specified and as directed by Engr-in-charge.

S&F Uneco pendent light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD<10% complete all as specified and as directed by Engr-in-charge.

KRISHNA CONSTRUCTION COMPANY (BID ID -3476851)