REPAIR TO ROADS AND FURNITURE UNDER AGE B/R-III AND AGE B/R-V IN AOR OF GE (N) BATHINDA MIL STN

Amount

Preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc including removing the mud etc to a distance minimum 1.5 m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) @ 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanism including Supplying, laying, spreading 30 mm consolidated thickness of semi dense asphaltic concrete with Job mix formula using paving bitumen (VG-30) at the rate of 5.5% binder content by weight of total mix using mechanical paver for leveling within the specified tolerance as specified in SSR Part - I, rolled and consolidated to required camber and gradient with power roller for uniform smooth surface etc complete all as specified and directed by Engineer-in-Charge. Note :- (i) The job mix formula shall be approved by GE. (ii) 5.5% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds 5.5% as mentioned in Schedule A / BOQ during job mix formula, no plus price adjustment shall be made. If the quantity of the bitumen required as per job mix formula works out to less than 5.5% the recovery of the supply only bitumen shall be effected @ Rs 50/- per Kg. The cost of transportation of material and testing charges shall be borne by the Contractor.) (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work .

BLANK

Repairs to potholes not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth and applying tack coat @ 5 kg per 10 sq m of paving bitumen (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m of paving bitumen (VG-30), blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed, depth of pot holes exceeding 30mm. Note: (i) Pot holes shall be marked and checked by Engineer-in-charge. 100% quantity before commencement of work and shall also be entered in MB with reference to permanent objects before starting carpeting work. (ii) Rate quoted by contractor shall deemed to be including of supply of premixed macadam binder and chippings.

Supplying, laying & spreading upto 75 mm thick (consolidated thickness) premix bituminous macadam filling in depression (using 20 mm graded stone aggregate) in single layer with using mechanical paver using paving bitumen (VG-30) @ 4 % by weight of total mix with job mix formula, laid / rolled and compacted / consolidated to required camber and gradient with 8 to 10 tonne power roller to a uniform smooth surface etc complete all as specified and directed. Note :- (i) The job mix formula shall be approved by GE. (ii) 4.0% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds the 4% as mentioned above, no plus price adjustment shall be made. If the quantity of bitumen required as per job mix formula works out less than 4.0%, the recovery of the supply only bitumen shall be effected @ Rs. 50/- per Kg. The cost of transportation of material and testing charges shall be borne by the contractor. (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work

BLANK

M&L for painting lines, dashes, arrows, letters, marking etc of 3.0 mm thick film on new surfaces or previously treated road surfaces with hot applied retro reflective thermoplastic road marking paint (White / Golden yellow) conforming to MORT&H (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. Make :- Auto mark/ Asian Paint/ Berger.

All as per item No. 06 here in before but including removal existing marking paint complete all as specified and directed. Make :- Auto mark/ Asian Paint/ Berger.

S&F in repairs two way (dual direction) reflective road cat eye of plastic body of approx dimensions 100mmx 110mm x 20 mm with red / amber / white reflective panels and fixing the same on road surface by applying approximately 123 gm Epoxy mixture and placing the cat eye without applying excessive pressure and additional fixed with optional stem of about 13 grams at the centre of cat eye complete all as specified and directed by Engineer-in-Charge. (Make:- Model No DA-52 of Dark eye or equivalent make of 3M/ Greenlite)

S&F in repairs two way reflective road Solar Studs of Aluminium alloy body reflective panel of colour Yellow/ Red/ Blue/ White/ Green, body dimension 125mmx 125mm x 25 mm reflective panels and fixing with working time of 3 to 4 days after fully charged with charging time of 5 to 6 hours in sun light should have life span of three to five year with ploycarbonate clear facign designed with automatically turned on and off view distance must be 1000 mtrs with six supper bright LEDs with 10000 to 18000 mcd complete all as specified and directed by Engineer-in-Charge. (Make :- Model No DA-110 DHRUV of Dark eye or equival make of 3M/Greenlite)

S&F in repairs dual direction delineator 600 mm long made of 16 gauge MS rectangular pipe of size 25 x 68mm, pipe stove enameled and baked to 120 degree Celsius or powder coated, head made of ABS plastic rectangular moulded with flat face provided with high intensity prismatic reflector of colour (white/yellow/red) of size 100 x 125mm with additional 2 reflective strips of 25mm wide, shade as approved by GE and fixing in cement concrete (1:2:4) type B1 using 20mm graded stone aggregate with size of block 300mmx300mmx350mm deep including excavation and earth work in any strata complete all as directed by Engineer-in-charge. Make :- (Cat part No GPL-UBPH-11-56 of Greenlite or equivalent make & model of 3M/ Dark eye) Note: - The rate of PCC & earth work is included in the unit quoted rate.

Note for item Nos. 8, 9 & 10 :- In case of equivaletnt make & model, sample of equivaletnt make & model shall be approved by GE before bulk procurement. Nothing extra shall be paid on this account.

BLANK

Taking down old sign boards etc of overall area not exceeding 4 Sqm each complete all as specified and directed.

S & F Stainless steel work as in frame of block board/ Sign boards for roaad safety features, square, rectangular of size and thickness as per site requirement complete all as specified and directed.

Excavating in post holes or similar holes each not exceeding 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and ramming surplus soil to a distance not exceeding 50m and making good as in soft/loose soil complete all as specified.

M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base, foundation filling and mass concrete for post holes etc complete all as specified.

S & F aluminium composite Panel 6mm thick used as road sign boards, fabric sign board including taping of sheet, corners etc of any colour for road safety features etc complete all as specified.

M & L for writing letters with retro reflective luminious tape of any colour of width 25 mm and height not exceeding 300mm on given frame complete all as specified and directed.

Demolition of brick (laid flat or on edge, half or less that half) or brick tiles in floors, channels, kerbs, aprons etc (each layer), laid dry complete all as specified and directed.

M & L for 100 mm thick plain cement concrete type D-2, 1:4:8, using 40mm graded stone aggregate as in sub base below interlocking tiles complete all as specified.

M & L for sand filling under interlocking tiles including watering and consolidation complete all as specified.

M&L for machine pressed precast concrete interlocking paver block 60 mm thick with grey cement and pigment (coloured), ISI marked factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over 25 mm thick layer of sand complete all as specified. Note:- Sand filling shall be measured and paid separately under appropriate item of BOQ.

M & L cement concrete type C-1, 1:3:6 using 20mm graded stone aggregate as in Kerb stone, coping, packing around chequered tiles, interlocking paver blocks etccomplete all as specified.

M & L for painting two coats of synthetic enamel paint over one coat primer on new concrete surface including preparation of new surfaces complete all as specified.

M & L for painting one coat of synthetic enamel paint on old concrete surface including preparation of old surfaces complete all as specified.

M & L factory made precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone, quion block, apex stones etc, set in cement mortar (1:4) including formwork weathering, slightly rounded or chamfered angles and throating including taking down old kerb stone all as specified and directed. Note:- Excavation and earthwork included in the rate quoted. Nothing extra shall be paid on this account.

S & F Solar traffic blinkers 300mm dia ABS body in Amber/ Red colour, with accessories like Solar Panel 18 watt, frame for solar panel, traffic signal blinkers, wire harness, charge controller, Battery 7AH internal battery sealed lead acid, high brightness LED with viewing angle 30 degree including MS vertical pole 75 mm bore of 3.5 mtr height fixing with cement concrete 300mm x 300mm x 500mm complete all as specifiied and as directed by Engineer-in-Charge (Make :-Dark eye/ 3M/Greenlite). Note:- Necessary accessories , exevation, earth work and concrete work shall be included in the quoted rates.

S & F for convex mirror of 1000 mm dia made from long life ploy carbonate with strong impact resistant and shuttle proof fitted with a sun shield of protective hood of colour as approved by GE and 75 mm dia MS pipe duly painted of approved colour of suitable length as directed including fixing in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate with size of block 450 x 450 x 600mm deep including earthwork complete all as specifiied and as directed by Engineer-in-Charge..

Supply and laying ready mix bituminous premix for instant road repair in 25 Kg Bag packing complete all as specifiied and as directed by Engineer-in-Charge.

Note:-The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ

AP BUILDERS

JB Infrastructure

R B BUILDERS

FAIR DEAL CONSTRUCTION CO

M/S BHAGWATI CONSTRUCTION COMPANY

M/s Azure Infrastructure Construction Co.

K L JINDAL AND CO.