Repair of Distribution System for Pojewal Distributory No.1 off taking at R.D. 2150 m. of Pojewal Lift Irrigation Scheme off take at R.D. 112.526 KM left of Kandi Canal Stage II(Outlet RD 10500 Mtr.)

Amount

WATER SUPPLY

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((e)) C.I Single air valve screwed (Size 80mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

(27) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

(B) Class PN-1.6 as per ISI

((e)) 225/250mm i/d Sluice Valves flanged

Supply of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc.) 2.5 kg/cm2 pressure 225mm

Supply of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc.) 2.5 kg/cm2 pressure 250mm Dia

Supply and fixing Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 225mm Dia

Supply and fixing Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 250 mm Dia

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) 1:2:4 Cement concrete

(a) With shingle stone ballast or

(i) mixing by manual means

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works where not including in the complete rate of RCC including bending placing in position complete

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 225 mm Dia

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.250mm Dia

Supply of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. 225mm

Supply of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. 250mm

Supply of UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. 225-200mm

Supply of UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. 250-200mm

Supply fixing flange tail end point with CI flange including carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge 225mm

Supply fixing flange tail end point with CI flange including carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge 250mm

Supply and fixing socket including carriage , re-handling loading unloading , testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge 225mm

Supply and fixing socket including carriage , re-handling loading unloading , testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge 250mm

Any other item

NEM KUMAR BANSAL CONTRACTOR