8358 REPAIRS TO COMPOUND WALL, FENCING GATES, DRAINS, PATH AND HARD STANDING AT MD ACCN AND OTM ACCN UNDER AGE BR II SOUTH PUNE

Amount

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, mass concrete including demolition of existing concrete complete all as specified and as directed

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 including dismantling old brick / block work complete all as specified and as directed

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10cm in width including dismantling of old brick / block complete all as specified and as directed.

Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and as directed

Removing excavated material exceeding 50mtr and n.exc 250mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

S&F MS TMT bars 6 to 8mm dia and over, cut to length, bend to shape as required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation beams, plinth beam bases for columns etc and mass concrete including demolition of RCC complete all as specified and as directed.

M&L for RCC using 1 : 2 : 4 type B-1 using 20mm graded stone aggregate, in Columns, Pillars, Piers, Posts and struts including demolition of RCC complete all as specified and as directed. (Note : Reinforcement shall be measured seperately under respective item)

M&L for precast RCC using 1 : 2 : 4 type B-1 using 20mm graded stone aggregate, as in drain cover with plain faces setting in cement mortar 1:6 including demolition of RCC complete all as specified and as directed. (Note : Reinforcement shall be measured seperately under respective item)

Use and waste of form work to sides of concrete foundation, footings, bases of columns, rafts and raft beams, sides and soffit of foundation and plinth beams and similar work etc. for flat rough finished surface of concrete

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions, for rough finished surfaces of concrete.

M&L for fixing broken glass coping on walls in CM 1:3 including taking and removing rubbish complete all as specified and as directed.

M&L for providing cement concrete type B-0 (1:2:4) using (12.5mm graded aggragate) as in coping, bed plates, bed block & hold fasts set in cement mortar 1:4 etc including demolition of existing coping complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 Type B-0, (12.5mm graded stone aggregate) as jalli and louvers 35 mm thick including all mouldings set in CM 1:4 including dismantling complete all as directed by EIC.

M&L Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick/block work or concrete surfaces with WPC @ 3% by weight of cement finished even and smooth (without using extra lime or cement) on brick/block walling complete all as specified and as directed (Note : WPC shall be measured and paid separately)

M&L Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick/block work or concrete surfaces with WPC @ 3% by weight of cement finished even and smooth (without using extra lime or cement) incl taking down cement plaster on brick/block walling complete all as specified and as directed (Note : WPC shall be measured and paid separately)

Suypply only integral water proofing compound complete all as specified and as directed.

M&L for prepration of newly plastered surface of wall and applying two coat of cement base paint over one coat of primer complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering amd removing surplus spoil to a distance n.exc 50 mtr and making good surface in soft/loose soil complete all as specified and as directed.

Supply & Fixing chain link fencing 50x50mm mesh including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of existing fencing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L for mild steel work such as angle post, flat iron fillets for securing wire mesh, straps ties, etc and similar work, fabrication fro steel sections conforming to Fe-310-0 including all necessary welding, bending cold or hot, drilling holdes for bolts, in any shape or size as indicated, complete all as specified all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.410-0 or Fe 310-0 including all necessary drilling, bolting or riveting etc complete all as specified and as directed.

M&L for mild steel round bars, 100m dia and over Fe-410 (Gde E-250) as in stiffners for chain link fencing complete all as specified and as directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 5 to 10mm length of bolt exc 110mm but not exc 150mm complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick of any colour having tensile strength 550Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling complete all as specified & directed.

S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (Note :- Each line wire to be measured)

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for prepration of old treated plastered surface by brooming down with steel brush and applying one coat of cement base paint complete all as specified and as directed.

M&L for 1:3:6 type C-1 using 20mm graded stone aggregate as in suface channel and drain incl demolition complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

S&F for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars including deomolition and breaking up RCC, SWG, CPVC drain pipe complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm bore of pipe complete all as specified and directed

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 110 mm bore including demollition and breaking of drain pipes complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base 50mm thick including demolition complete all as specified and as directed

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection, PCC path including demolition complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor etc finished even and smooth without using extra cement including demolition complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 22mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) incl demolition of old stone slab/tiles of any description complete all as specified and as directed.

M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade, laid over & including 25mm thick stone dust/grit incl demolition of old stone slab/tiles of any description all as specified and as directed.

M&L for Granite 20mm thick (of any type) (Table rubbed and polished) in steps, jambs pillars, window cills, cooking platform and like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade incl dismantling of old stone slab/tiles of any description complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

TRINITY ENGINEERS

Gauri Associates

REKHA ELECTRICALS

SARATH ENTERPRISES

M/S Gurnir constructions

M/S Abhishek Builders