SPL REPAIR REPLACEMENT FOR CONVERSION OF EXISTING SYSTEM OF STREET CONTROL SYSTEM AT DINJAN MIL STN UNDER GE DINJAN

S&F of 60W All in One Hybrid Solar Street Light, 50,000 LED life, Panel 90 Wp Monocrystalline, AC input Voltage 140V-280V, System efficacy >150 LPW, MPPT, Intelligent Fix Dimmig/PIR Motion Dimming , 42Ah LiFePO4 12.8V DC Battery, CCT 5700 ANSI, CRI > 70, over charge, deep discharge, reverse polarity and over temperature protection, 24 hours autonomy, 4kV Internal with Driver +10KV SPD, Driver Efficiency > 85%, O/P Short Circuit Protection, O/P Open Circuit protection, OVP > 320 V AC, Housing Aluminium extruded body, externally accessible CCU and battery, IP65, Suitable for Pole top OD 70-80mm, Mounting Pole top, side/center mounting, Certification LM79 (NABL), TTR, BIS for Solar Panel, BIS for Battery, LM80 complete all as specified and as directed.

Supply & fixing of automatic street light switch 5 Kw, 3 phae using NATURE SWITCH (using Infrared sensor technology) for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) alongwith 3 power contractor. 03 Nos incoing MCBs and 03 Nos outgoing MCBs of 16-20 Amps each and circuit wiring (copper) of min 10 Sqmm, support terminals block with suitable enclosure on pole/wall fixed with MS clamp 25 X 3 mm with bolts, nuts as requried at site muntable enlosure made of rust proof, electric shock proof, terminate proof and FR grade thermoplastic polycarbonate enclosure (with hinged lid) conforming to IP-66 protection class 2 complete as specified and directed. Note :- (a) Price is inclusive of sensor, contractor, incoming outgoing MCBs and enclosure etc as complete set. (b) SS nut bolts, clamp for fixing on pole/wall are to be included in the quoted rates. (c) The sensor must have the warrranty of min 2 years (d) The test certificate and warranty certificate must be provide from OEM by contractor.

Dismantling, Shifting & Errection of Steel tubular pole from one site to another site all complete as specified and as directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC , Luman output shoul not be less than 120lpw, IK Rating should not be less than 10, surge protection should not be less than 4 kv internal and 10 kv external, Total Harmonic distrortion should be less than 10, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with dual driver 45W each, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Note : Service centre is required in the same district where installation is to be done. LM 79 certificate from inhose testing facility should be provided by contractor at the time of supply of material.

Supply & Installation testing and commissioning of symmetric type Galvanized steel high mast lighting system of 12 meter in length in two section, 3 mm & 4 mm section thickness, top dia 150 mm, bottom dia 360 mm, with AISI 3161 steel wire rope 7/19, 6 mm dia system 2 for wich and 3 for lantern carriage, including of timer pannel, complete all as specified and as directed including following :- (a) Sustain upto wind speed of 180 Kmph (b) Non Flame Proof integral Motor. (c) Movable lantern carriage. (d) Double drum Winch. (e) 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction. (f) Trailing Cable –1 per mast (5 Core 2.5 Sq mm) (g) Lightning Finial , Anchor Plate & Template (h) Accessories like Plug and Socket, GI Nut bolt with double washer,wiring cable for fixture, flexible conduit, copper lug, PVC tape, Cable tie etc (j) Foundation Bolt & Nuts T & P for fixing with its allied accessories as per OEM. System is suitable for loading 08 nos 350 w LED lights (k) Installation, Testing & Commissioning, Casting of foundation for High Mast & Panel @10T/sqm soil bearing as per OEM. (l) Earthing for High Mast and Timer panel, Power Supply up to the Panel & Cable laying, Providing Power Cable from High Mast to Panel. Note: Installation should be complete in presence of OEM Rep

Supply and Fixing of 9 watt LED aviation light with electric connection complete all as specified and directed.

Supply and Fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply, Laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed.