Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.2 LAccepted-AOC RAM JANAKI THAKURBARI J T ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹50.4 L+₹1.8 L (3.62%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹50.7 L+₹2.0 L (4.18%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹51.6 L+₹3.0 L (6.08%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹53.6 L+₹5.0 L (10.2%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹48.2 L
EMD Value
₹96,460
Closing Date
17 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
ADDN ALT TO BLDG NO P 290 BLDG NO T 10 IN M ZONE BLDG NO P 564 P569 OF ADM BLOCK TECH BLOCK OF COSR ADDN ALT TO OPEN DRAIN AT REAR SIDE OF BLDG NO P 473 OFFICE COMPLEX BLDG NO P 475 JCO MESS IN CZW ADDN ALT TO WATER SUPPLY POINT AND LIGHTING ARR
2023_MES_620262_1
8581/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, category a( I)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹96,460
6 Nov 2023
23 Sept 2023
19 Oct 2023
23 Sept 2023
17 Oct 2023
11 Oct 2023
23 Sept 2023 - 30 Sept 2023
Amount
Demolition of stone slabs and tiles of any description or thickness in floor, aprons laid , bedded and pointed in any mortar etc complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quoins arches pillar etc complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks(using old size burnt bricks), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed.
M&L for Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed.
M&L for vitrified light shade ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles , laid over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed.
All as per item No-5.00 here-in-before but on vertical surfaces such as skirting/dado laid over and including 10 mm thich rendering in cm 1:4.
Dismantling wall and ceiling boards( fibre pulp, insulation etc.) or insulation board /slabs/blanket any thickness including cover fillets etc complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles etc laid over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames etc complete all as specified and as directed.
S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification etc complete all as specified and as directed.
M&L for factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade etc complete all as specified and as directed.
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters(Without taking off shutters from the frames etc complete all as specified and as directed.
S&F pressed steel framess(thickness of MS sheet 1.25 mm) for doors with one or more retates of size 125x60mm including necessary fixing lugs, hinges, lock strike platee, etc complete all as specified and as directed.
S&F 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commericial type on both side, etc complete all as specified and as directed.
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer etc complete all as specified and as directed.
M&L for 35 mm thick 2nd class hardwood glazed and skeleton shutters factory made open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats etc complete all as specified and as directed.
S & F galvanized mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
S &F Solar Control film 25 micron reflective type sicked to glass panes as per instructions of manufactures etc complete all as specified and as directed.
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and as directed.
S&F mortice lock, vertical type of size 100 mm with mild steel body 4 lever complete all as specified and directed.
S&F door closer hydraulically aluminium cast body regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F MS butt hings medium weight cold rolled 100mm size etc complete all as specified and as directed.
S&F 150 mm long aluminium anodised tower bolts etc complete all as specified and as directed.
S&F 100mm long Brasss handles cast type, polished bright etc complete all as specified and as directed.
S&F 100mm long aluminium anodised handles cast type anodised etc complete all as specified and as directed.
S&F Ceramic wall Hung wash basin, glossy and polished finish/wall hung/ wall mounted bathroom sink/ super white colour round shape 550 x 440x 135 mm with coupling and waste pipe complete all as specified and directed and as approved by GE.
S&F for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia etc complete all as specified and as directed.
S & F 6 mm thick frameless Oval Bevelled Mirror, Edges grounded, size 24 x 26 inches etc complete all as specified and as directed.
S&F in repairs 600 mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws etc complete all as specified and as directed.
S&F corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws etc complete all as specified and as directed.
S&F Vitreous china Urinal, bowl type and any coloured urinal spreader of PTMT ,flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets,flush pipe,grating and union for 32mm dia PVC pipe discharge pipe connection to drain etc complete all as specified and as directed.
S&F of PVC (SWR) 75 mm bore pipe etc complete all as specified and as directed.
S & F PVC (SWR) Bend with any radious of 75 mm dia etc complete all as specified and as directed.
S & F PVC (SWR) Bend with access door any radious of 75 mm dia etc complete all as specified and as directed.
S&F anodised aluminium powder coated any colour frame for doors, windows, grills, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and as directed.
M&L for Mild steel framed work as in doors and gates of angle or other section including stringers, braces etc complete drilled for fixing of steel sheeting or other coverings to doors and arches and griling etc all as specified and directed by Engr-in -Charge .
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.
M&L for applying two coats of oil emulsion distemper on old wall surfaces by applying 1 mm thick birla putty including complete removal of existing treatment and preparation of surfaces etc complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and as directed.
M&L for 19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework etc complete all as specified and as directed.
S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed.
S&F magnet Catcher for cub board complete all as specified and directed.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and as directed.
Demlition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
M&L for PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.
M &L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in suface channel or drain concrete complete all as specified and directed.
M & L brick work in CM (1:4) with sub class 'B' brickS(using old size burnt brick)full brick thick straight or curved on plan n. exc 6m mean radius etc complete all as specified and as directed.
All as per Item No.54.00 here-in-above but except bricks only.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and as directed.
M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 in two coats 10+5 mm both coats mixed with integral water proofing compound and finishing the surfaces even and smooth without using extra cement etc complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in coping kerb etc including necessay form work etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors laid over and including 15 mm thick screed bed in CM (1:4) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed.
All as per Item No.60.00 here-in-above but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out etc complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, man holes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out of Soft/Loose soil etc complete all as specified and as directed.
M&L for RCC (1:1.5:3) (using20mm Graded stone Aggregate) nominal mix as in Foundations, including rafts,footings,;plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.
M&L for RCC Type A-1 (1:1.5:3) (using 20mm Graded stone Aggregate) nominal mix as in column, pillars, piers, posts and struts etc complete all as specified and as directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished Surface etc complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns of foundation and plinth beams; and similar work for fair finished Surface etc complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions. for fair finished Surface etc complete all as specified and as directed.
M&Lfor Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.
M&Lfor Mild steel TMT bars 5 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed.
M&L for 40mm thick Damp proof course, (1:2:4) using 12.5mm graded stone aggregate to horizontal or vertical surfaces mixed with water proofing compound as per manufacturers instructions and applying evenly two coats of hot blown bitumen grade VG-10 @ 1.2 kg per sqm blended with clear sand @ 0.05 cum/sqm, each coat and fixing polythene film 150 micron over a coat of bitumen over full width of wall including thickness of internal and external plaster including necessary formwork etc complete all as specified and directed.
M&L for Hardcore of stone gauge n exc. 63 mm, deposited, spread and levelled in layers nexc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.
M&L for Sub-base,floors and Paving,etc 100mm thick Cemen Concrete Type D-2, (1:4:8) (using 40mm graded stone aggregate) etc complete all as specified and as directed.
M&L for Sub-base,floors and Paving,etc 25 mm thick Cement Concrete for Finishig Course Type B-1 (1:2:4) (20mm graded stone aggregate) etc complete all as specified and as directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of Cement Plaster (1:6) on internal surface etc complete all as specified and as directed.
M & L for RCC M-20 nominal mix (1:2:4) type B- 1 (20mm graded aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic & other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water trought & the like including weathering, slightly rounded or chamfered angles & throating,etc complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 28.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and as directed.
S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed.
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in Eaves boards complete all as specified and directed.
M/L for 75 mm thick PCC (1:3:6) type C-2 , using 40 mm graded stone agg in Plinth Protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed
M&L for Preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and as directed.
S&F for 04 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and as directed.
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and etc complete all as specified and as directed.
M&L for granite of 18 to 20 mm thick table rubbed and polished on platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty etc complete all as specified and as directed.
S&F Sheet glass 3mm thick, figured quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
S&F 35 mm thick factory made 2nd class plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), supplied and fitted to chowkats, complete all as specified and directed.
S&F in repair 300 mm MS ordinary rat tail spring including roller and roller plate complete all as specified and directed.
S & F Alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.
S/F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and as directed.
S&F Aluminium handle cast type anodised 150 mm long etc complete all as specified and as directed.
Taking up or down 15 mm GI steel tubing and connections etc complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and as directed.
S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed.
S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed.
S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle etc complete all as specified and as directed.
S&F one piece EWC with duroplast slim seat cover and twin flush fittings 665 x 355 x 750 mm (snow white) S trap 300mm and fittings etc complete all as specified and as directed. (Make Cera and cat No S1013142 or equivalent as approved by GE).
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook(Make :Prayag or equivelent) etc complete all as specified and as directed.
S&F in repair brass CP Pillar taps fixed in 15mm dia pipe fancy type etc complete all as specified and as directed.
S&F 15mm dia stop cock fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed etc complete all as specified and as directed.
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed.
S&F in repairs CP toilet paper holder etc complete all as specified and as directed.
S&F in repairs vitreous china fancy wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
M & L for preparation of newly surfaces of walls and applying two coats of oil bound distemper (oil emulsion) over one coat of chalk whiting etc complete all as specified and as directed.
M & L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint over old painted surface complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on wooden surface over 10 cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed
M &L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed.
M&L in repair machine pressed coloured chequered tiles 25 cm x 25 cm x 25 mm thick set, jointed & pointed in grey cement with pigment including 20 mm thick screed bed in CM 1:6 etc complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface etc complete all as specified and as directed.
S&F for Joist, Channel, angle, vertical post or tees sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e. within 20mm of the length indicated), conforming Fe- 290. Gde -E-165 etc complete all as specified and as directed.
M&L for PCC (1:2:4) type B-2, using 40mm graded stone aggregate and paving 100 mm thick etc complete all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe-410-W(Gde-E-250) quality-B and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication etc complete all as specified and as directed.
S&F for rolled section as in main and cross beams , purlins , rafters where connected to common rafter and running rails etc conforming to Fe- 410-w etc complete all as specified and as directed.
S&F for Plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-w etc complete all as specified and as directed.
M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for Plain Cement concrete (1:3:6) type C-2 (Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed
M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc; vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge
M&L for Reinforced cement concrete (1:1.5:3) , type A-1,(Nominal mix) using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed by the Engineer-in-Charge.
M & L for applying two coats of Exterior Weather Proof Paint over a coat of primer including preparation of new plastered surfaces of wall etc complete all as specified and as directed.
S&F Stainless steel (grade 304) letters (width & thickness/depth shall be 25 mm each, box type) of size 300mm wide and height n.exc .450mm made up of 1mm thick stainless sheet (grade 304) with necessary fittings and fixtures on MS Plate of any section/ thickness embedded in mass concrete complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ceramic coloured tiles (dark shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed by the Engineer-in-Charge.
M & L for PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) 25 mm thick as in sub base to receive tiles complete all as specified and as directed by the Engineer-in-Charge.
Supply only Integral Water Proofing (liquid) Compound complete all as specified and as directed by the Engineer-in-Charge.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site etc complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 129.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet 2 in 1, 3 pin, 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination 2 in 1, 3 pin 5A etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and as directed.
M&L for Bell push 6A etc complete all as specified and as directed.
M&L for Bell Multi Music type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 watt socket size flush type on the existing phenolic laminatied sheet etc complete all as specified and as directed.
M&L for sub main wiring with two runs of 4.00 Sq mm and one run of 4.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4.00 Sq mm + one run of 4.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. Make:- Richa/RR Kabel/Finolex Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
M&L for sub main wiring with two runs of 6 Sq mm and one run of 6 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6 Sq mm + one run of 6 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .
Supply and fixing LED luminaire (2' x 2') (Warm/White) 600 mm x 600 mm, 40/42 watt, 240V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and as directed.
Taking down S&F for , LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves Cat No -CCS-102-20-65-SL-DP-NWH/ Bajaj/ Philips.
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP20 Amps complete all as specified and as directed.
Supply and fixing Voltage stablizer for automatic operation single phase indoor type and designed for input variation between 90-300 volts with digital disply out put voltage stabliser at 230 Volts with energy of± 2.5 % and of capacity 4 KVA complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and as directed.
Supply and laying tubes medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore GI tubing etc complete all as specified and as directed.
M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint etc complete all as specified and as directed.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting etc complete all as specified and as directed.ake : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm sweep complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
Supply, laying/fixing GI tubing medium grade of size 50 mm with all fitting in trenches or fixed to walls, ceilings or laid in floors complete all as specified and directed.
Supply, laying/fixing GI tubing medium grade of size 25 mm with all fitting in trenches or fixed to walls, ceilings or laid in floors complete all as specified and directed.
Supply, laying/fixing and testing of plumbing work such as UPVC pipes suitable dia of 45 mtr length suitable for the respective working pressure 6kg/cm2 to 10kg/cm2 with all fittings coupling, tees, bends, reducer, bushes, male and female thread adaptors, screwed adaptors, and jointing with solvent chemical complete all as specified and directed. (Make:- Finolex, Astral, Prince )
M&L for cutting existing steel water tubing in position for alteration or addition for replacing damaged length/fittings etc of size 40 To 50 mm bore complete all as specified and directed. .
S & F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm dia bore complete all as specified and directed. . .
S & F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 50 mm dia bore complete all as specified and directed. .
Supply, installation, Testing & Commissioning of Centre High Jet Nozzles Brass chrome plated complete all as specified and directed. (Make: Oases OR equivalent as approved by GE)
Supply, installation, Testing & Commissioning of ICE Tower Nozzles Brass chrome plated complete all as specified and directed. (Make: Oases OR equivalent as approved by GE)
Supply, installation, Testing & Commissioning of open well Submersible pump at flow rate 150 LPM at the head of 6 mtr suitable for 230 V ,single phase system having capacity 3 HP complete all as specified and directed. (Make: crompton/kirloskar OR equivalent as approved by GE )
Supply, installation, Testing & Commissioning of Electrical panel cubical type wall / floor mounted, 16 gauge weather proof powder coated double door type IP 65 Protection for recirculation pump incoming MCB, Relay, contactor, ammeter, voltmeter, single phase preventer, push button, TPN MCB's, SP,MCB base, farul, connector, indicating lights complete all as specified and directed. (Panel shall be of Make: L&T or equivalent / CPRI Approved as approved by GE)
Supply, installation, Testing & Commissioning of SS light stand complete all as specified and directed. (Make:- Oases OR equivalent as approved by GE)
Supply, installation, Testing & Commissioning of SMPS power supply controller of light complete all as specified and directed. (Make:- Oases OR equivalent as approved by GE)
Supply, installation, Testing & Commissioning of electrical work such as Submercible cable 20 RM Suitable for single phase 3 HP open well submersible pump, conduit, wiring of underwater lights and pump etc(Note considering electrical panel 4 mtr from the fountain etc complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core etc complete all as specified and directed.
Supply, installation, Testing & Commissioning of under water LED Lights to highlight the jets Suitable for 12V supply with LED's (panasonic / Opto) 1M flexible cable with cable gland complete all as specified and directed. OWC-210 3W X 9 Led's 36W each Colour RGB Make:- Oases/ Bajaj/ Crompton/Havells)
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed.
M/S SANJAY ENTERPRISES
commercial enterprises
M/s Phoenix Constructions
Rameshwar Prasad
KAILASH KUMAR LADHA
M/S RAHUL TRADING CO.
M/s MATRI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .