CONSTRUCTION OF PANCHAYAT OFFICE BUILDING AT PANNAIVILAGAM HABITATION NAKAGUDI PANCHAYAT in Koradachery Block under AGAMT -2024-2025

Amount

CONSTRUCTION OF PANCHAYAT OFFICE BUILDING PANNAIVILAGAM HABITATION

Earth work excavation depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff black cotton soil,hard red earth , shales,murrams, gravel stoney earth and earth mixed with small size boulders sand slit of other loose soil

Ist Depth

Iind Depth

IIIrd Depth

Supplying filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

Refilling with Excavated earth including all charges etc for completed

Supplying filling with filling Gravel in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

CC 1:4:8 mix using 40mm ISS HBG metal including cost, conveyance for all materials & labour charges etc complete

Brick work in CM 1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2 1/4" including cost,conveyance & labour charges etc complete

Below Level

Super Structure

RCC 1:1.5:3 mix using 20 mm ISS HBG metal including cost of all materials & labour charges etc complete

Below Level

Super Structure

Supplying & fabrication of steel including cost of steel, binding wire, labour charges etc complete

Supplying and erecting centering, shuterring including necessary supports for plane surface in foundation, basement and in all floors for RCC column footing, plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc

Coloumn

Sunshade

Floor finishing with ceramic tiles of size 30cmx30cm including cost and conveyance of all materials to site and all labour charges etc complete

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Paving the floor with vitrified tiles in CM 1:3 including all charges etc complete

Paving with paver blocks - 60mm thick laid as interlocking blocks including cost and conveyance and other labour charges etc complete.,

Dadoing the walls with new Glazed tiles of size 150 x150 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Supplying and fixing fine polished cuddapah slab of Cost of 20 / 30mm thick cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

Pressed Tiles with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Rolling Shutter

Jolly

Labour charges for fixing of Steel Door including all labour charges etc. complete.

Labour charges for fixing of Steel Window including all labour charges etc. complete.

Plastering with Cement Morter 1:3mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Plastering with Cement Morter 1:5mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Exterior Emulsion in two coats with best approved colour including cost of materials & labour charges etc complete

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,etc.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for Plug point SD 37

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 4 sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 112

Supply and fixing of single box type 4' 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads fron terminals to the fitting. SD 89

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 85

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (SD 144)

CFL Blup (SD80)

Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualtiy

European water closet with all fittings and 10 lit capacity flushing tank

Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm - 1 No.

Provision for Display Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Vignesh Subramanian