CERTAIN REPAIR TO RETAINING WALLS, HARDSTANDINGS, DRAINS, PARAPETS AT HQ MTN BDE, BTC-I, BTC-II, OLD CBS, FD WKSP, AGE (I) BHALRA, NASKA CAMP AND REPAIR TO PATHS, GATE, FENCING, PLAYGROUNDS AT KAPRA, BHALRA, GHATI MORE, NASKA CAMP AT BHALRA MIL STN

Amount

Demolition of bric work / stone / boulder masonry, built in cement mortar including all quoins arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for walling of random rubble stone masonry, uncorsed, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed by Engineer-In-Charge. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.

All as per the description of Serial Item No '02' here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No '01' complete, all as specified and as directed.

Material and labour for pre-cast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete all as specified & directed.

Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete.

Material and labour for PCC 1:2:4 type - B1 (using 20 mm graded crushed stone aggregate), as in coping, kneelers,parapets, apex stones and similar works incl necessary formwork complete all as specified directed.

Supply & fixing of PVC (SWR) pipes 110mm single socketed in any length, fixed in retaining wall for weep holes and complete all as specified directed.

Material and labour for raised pointing in CM 1:4 including raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar complete all as specified.

Material and labour for broken stone or boulder of guage exc 80 to 150mm, dry, hand packed tighty, as in back filling of retaining wall complete.

Material and labour for broken stone or boulder of guage exc 80 to 150mm, dry, hand packed tighty, as in back filling of retaining wall (EXCEPT STONE/BOULDER) complete.

Demolition of cement concrete (unreinforced) any description and in any position not other wise described.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in surface channels and drain etc including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15cm thickness (below or above ground level).

Material and labour for 100 mm thick cement concrete 1:4:8, type D2 (40 mm graded crushed stone aggregate) as in sub base of flooring complete all as specified directed.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), 75 mm thick as in hard standing finished the concrete surface even & smooth without using extra cement complete all as specified directed.

Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade 'A'.

Dismantling of Stone slabs and tiles laid dry and pointing of any description or thickness in floors, aprons etc complete all as specified directed.

Material and labour for 80 mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigments complete all as specified and as directed.

Material and labour for 80 mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigments (BUT EXCEPT BLOCK) complete all as specified and as directed.

Material and labour for 25mm thick sand cusioning layer under interlocking paver block complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

Material & Labour for factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed.

Dismantling posts or struts embedded in Concrete, brick work, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Supply & fixing mild steel angle iron or other section in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description, over 10 cm in width or girth & applying two coat of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of galvanised barbed wire of any description and in any postion complete all as specified and directed.

Supply & fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

VEER TRADERS

M/S SHUBAM ENGINEERS

M/S KOTWAL CONSTRUCTIONS

A S CONSTRUCTION