Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹23.0 L+₹2.3 L (11.2%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹23.5 L+₹2.8 L (13.7%)Rejected-Finance 15 GURU RAM DASS COLONY MITHAPUR JALANDHAR | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹25.5 L+₹4.8 L (23.2%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
8 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (west) Jalandhar Cantt
Kabir Road Jalandhar Cantt
CERTAIN REAPIR /MAINT OF MD ACCN A-3 AREA OF AGE B/R-I UNDER GE (W) JRC
2022_MES_571892_1
GE/JAL(W)-70/2022-23
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹40,000
Yes
22 Feb 2023
29 Dec 2022
14 Feb 2023
29 Dec 2022
8 Feb 2023
27 Jan 2023
Amount
Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level.
M&L 40mm thick cement concrete type B-1, 1:2:4, (20mm graded stone aggregate) as in floor finishes etc
M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in path and in plinth protection finished fair and even.
M&L Cement conncrete 1:4:8 type D2 using(40mm graded stone aggr ) as in foundation filling complete all as specified and directed.
Roughening old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per Sqm to receive screed bed .
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
Ditto as above item no 7 but in vertical surface including 10mm thick backing coat of CM 1:4.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for ceramic coloured tiles of size 300x200mmx6-7mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured cement to match including 10mm thick backing coat plaster in CM 1:4 complete all as specified and directed by Engr-in-Charge.
M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge
M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge.
M&L 40mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg in padding by using water proofing compound @3% by the weight of cementComplete all as specified and directed.
M&L 12mm thick rendering on top of roof salb in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.
Disconnecting existing tanks, setting aside (or lowering if required reconnecting and re-fixing in position complete all as specified and as directed
S&F in repairs vitreous China orissa pattern water closet size 580mmx440mm white with integral foot rest.
S&F in repair vitreous china white wash hand basin flat back size 550x400mm includingCI/MS brackets including cutting for and pinning 'in brackets but excluding waste pipe.
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed by Engr in Charge.
Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store.
All as per item No 21 hereinbefore but 20mm dia .
S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore of pipe 15mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4.
All as per item No 23 hereinbefore but 20mm dia.
S&F in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed.
S&F in repair 20mm bore of pipe ball valves high pressure of PTMT with eppoxy coated aluminium rod & high density p[olythene ball screwed for iron pipe and fixed. (Min weight for 20mm - 210 gms).
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete Make-Polyplast,sysmet or equivalent complete all as specified and directed by Engr-in-Charge.
S&F in repair pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.
S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity 500ltr, and including dismantling of water tankog capacity exc 250 ltr but n exc 500 ltrs .
Dismantling of cast iron drain 100 mm dia from floor/walls etc and taking out of trenches/floors.
M&L for cast iron soil waste and vent pipe sandcaste any length with or without ears with cement joints fixed to walls 75mm dia complete all as specified and directed by Engr-in-Charge.
All as per item No 35 above but bore of pipe 100mm dia.
M&L cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Diameter of outlet in 75mm.
M& L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor.
M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion complete allas directed.
M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per squqre mtr including cleaning surfaces.
Taking down shutters of any description n exceeding 1 Sqm each
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.
S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides.
S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (b)
S & F for Flush shutters, 19 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per direc
S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples.
M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.
S & F Mild steel tower bolt anodised of extruded section 200mm
S &F in repair Mild steel 300 mm sliding door with hasp staple (bolt type) and fixing clips of sheet caste or extruded section and fixing bolts and sliding both of extruded sections.
S & F MS cast type anodised handles 150 mm
S&F Butt hinges, medium weight cold rolled mild steel 100mm size.
S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.
M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
M& L in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixing by screw ,welding, etc as per requirement and complete all as specified and as directed .
S & F mild steel powder coated pelmet rods including 02 Nos of brackets complete all as specified and as directed by the Engr in charge
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified and directed
M&L for brickwork with subclass 'B' size bricks, straight or curved on plan exc 6 cm mean radius , built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.,including necessary form work and scaffolding from ground to (height upto 9.0Mtr) complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement ,including necessary form work and scaffolding from ground to (height upto 9.0Mtr) complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper (white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M&L for prepration of new plaster surfaces of walls incl, & applying two coats of exterior emultion paint over of wall primer and complete all as manufacurers instructions and directed by Engr -in-charge..
M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old surface of walls and applying one coats of oil bound distemper(white or tinted) complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer
M/S Vinod Kumar
M/S Kuldip Construction Co.
M/s Nirmal Singh and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .