SPECIAL REPAIRS OF REAR WING OF INTEGRATED OPERATIONS CENTRE BUILDING P91 AT INS HANSA AND REPLACEMENT AND RESURFACING OF HANGAR FLOOR OF EHU MIG P430 BUILDING WITH ANTISKID EPOXY POLYURETHANE COATING AT NAY GOA UNDER AGE BR I OF GE NW VASCO

Amount

SPECIAL REPAIRS OF REAR WING OF INTEGRATED OPERATIONS CENTRE BUILDING (P-91) AT INS HANSA

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed

S&F PVC Rain Water Pipe 150 mm dia including all fittings, head , shoes, branches all as specified fixed in wall including joint with PVC adhesive complete all as specified and as directed

S&F for PVC plain bends 150 mm bore complete all as specified and as directed

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed in floors/ walls complete all as specified and as directed

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed

S & F in repairs 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with ANF (Board) edge tiles with Armstrong 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 34%.The tile shall be laid on Armstrong Prelude38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified and directed.

M&L complete removal of existing treatment and Preparation of Old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed

S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron section, fabricated by using the JINDAL / INDAL / HINDAL sections including all necessary roller wheels for window, cleats , handle, door stoper, handle, locking arrangement, Mortice lock and arrangements to receive glass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured and paid, glass and prelaminated particle board will be measured and paid seperately) all sections as approved by GE complete all as specified and as directed

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam colour PVC sheet on back face,including 20 mm thick PVC lining around all 4 edges of shutter, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

S&F Factory made 100% solid wood plastic(WPC) Decorative Door Frame,single rebate of size 75mm x 50mm made from wood plastic composite(single extruded process) material with density 780 Kg/Cum complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F butt hinges medium weight stainless steel 100 mm size complete all as specified and as directed

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed

S & F Aluminium alloy wire mesh, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples in repairs complete all as specified and as directed

S&F 4mm thick sheet glass ordinary quality exceeding 0.5 sqm each pane complete all as specified and as directed

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in subbase,plinth protections, finished even and smooth w/o using extra cement complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 300 x 200 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering in CM 1:4.complete all as specified and as directed.

Dismantling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete all as specified and as directed

Dismentaling water tanks and removing to store exc 250 and n.exc 500 ltrs complete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position incl 20mm bore PVC float valve complete all as specified and directed in SSR Pt I

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position incl 20mm bore PVC float valvecomplete all as specified and directed in SSR Pt I

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and as directed

All as per item No. 37 above but 25 mm dia complete all as specified and as directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm complete all as specified and as directed

All as per item No. 39 above but 25 mm dia complete all as specified and as directed

S&F in repairs fancy type chromium plated 20 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand waste fitting , waste pipe1.2m length complete all as specified and as directed

S&F PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity complete all as specified and as directed

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete complete all as specified and as directed

S&F in repair chromium plated two way bib cock with wall flange in hindware /jaquar or equivalent complete all as specified and as directed

S&F for hand shower (Health faucet) dia 8mm 1 mtr long flexible tube and wall hook complete all as specified and as directed of Cat No ALD 573 of Jaquar or equivalent in Parko/Kohler

S&F in repairs Soap dish, of material brass with glossy finish, complete all as specified and as directed of Cat No. BA-45 of Prayag or equivalent.

S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F in repairs Vitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and as directed

S & F in repairs chromium plated 15 mm bore Push taps cast copper alloy high pressure screwed for iron/CPVC pipe for urinal complete all as specified and directed.

PVC Connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed

S&F in PVC (SWR) floor trap 75 mm, plain with CP grating including joining with solvent cement complete

Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms) 32mm bore complete all as specified and as directed

S&F in repair 20 mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron/PVC pipe complete all as specified & directed.

S&F fancy type pillar taps, long neck, 20 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified and as directed of (Cat No 9204 of Prayag or equivalent of Jaquar/Marc)

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange complete all as specified and as directed

S&F grating round 125 mm size of PTMT (min weight 40 grams) complete all as specified and as directed

S & F Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6 complete all as specified and as directed

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and as directed

M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed

M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement complete all as specified and as directed Note :- Integral water proofing compound will be measured and paid seperately.

Supply only water proofing compound

M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall internal surface finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparing new plastered ceiling surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling complete all as specified and as directed

M&L Preparing new plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed

M&L complete removal of existing treatment and Preparing old plastered ceiling surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling complete all as specified and as directed

M&L complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed

M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as specified and as directed.

M&L for preparation by complete removal of existing treatment of painted walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as specified and as directed.

M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth.

S&F in repair Ball brass valve, high pressure, with polythene floa thorizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 25 mm bore complete all as specified and as directed.

S&F lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick single side prelam PVC sheet duly fitted into the wall as per specifications and drawing including 5mm thick PVC sheet fillet of width 35mm for wall pannelling complete all as specified and as directed.

S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings and locking arrangements as per direction and specifications complete all as specified and as directed

S&F sinks with drainage board made of stainless steel sheet lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

REPLACEMENT AND RESURFACING OF HANGAR FLOOR OF EHU MIG (P-430 BUILDING) WIH ANTI-SKID EPOXY POLYURETHANE COATING AT NAY (GOA)

Providing and applying 5.3mm ESD-Epoxy antiskid floor coating system including surface preparation by cleaning surface from dust, dirt, muck,moisture and all foreign material and cleaned by mechanical means using mechanical scrubber/grinder, chemical treatment for cleaning oil if required followed by application of primer Nitoprime 25 of Fosroc or equivalent in Sika/Bostik which shall be a two component, epoxy based system. The pre packed and factory weighed two components shall be mixed for 3 mins using a low speed drill and applied at 5.5 - 6.5 m2/ltr @ 200 microns thick. Then providing and applying the screed layer with Nitoflor EU5 of Fosroc or equivalent in Sika/Bostik at minimum thickness of 3000 [email protected] m2/pack @ 2mm thickness. The self levelling screed shall consist of a low viscous epoxy system and graded aggregate ( special silica/Filler).

The pre packed components shall be mixed as per the packing ratio and applied. The epoxy underlay shall achieve a minimum compressive strength of 60 N/mm2, Flexural strength of 20 N/mm2 and Tensile strength of 10N/mm2 @ 7 days.The underlay shall have nil water absorption when tested as per BS1881 Part 122-1983. Then over the screed apply copper tape of 100microns thick and 25mm width, connected to existing earth pit having spacing 10m both directions, then conductive primer coat Nitoflor SL of Fosroc or equivalent in Sika/Bostik Conductive Basecoat shall be applied at a thickness of 100 microns and then top coat of 2000microns - Nitoflor SL conductive of Fosroc or equivalent in Sika/Bostik shall be applied to provide Approx. 3x103 - 9 x103 Ohm Surface resistance .

Which shall be supplied in pre-weighed packs and ready to mix and use which will consist of resin, hardner, EPI (colour concentrate) formulated aggregate and carbon fibre + special anti skid silica sand/Filler. All these to be mixed in the pre weighed ratio, add EPI colour (colour concentrate) and formulated aggregates + special antiskid silica sand/Filler to agitate the mixture by an elecrically driven motor and lay the mixture to the thickness of 2000 microns then deaerate by using spike rollers and to allow to cure for a minimum period of 48 hours before trafficking is commenced. Over top coat demarcation paint with flourescent will be applied.

M&L for Cutting out existing damaged concrete slab with cutter in proper rectangular, square or triangular shape including wahsing existing surface of slab with (0.5N) hydrochloric acid 2.5 Ltr /10 sqm and applying epoxy resin primer 0.34 Kg/Sqm and finally applying epoxy resin mortar comprising of one part of epoxy resin and seven parts of quartz sand mix No 10 by weight laying and levelling in proper shape to flush with existing slab complete all as directed. Make: Fosroc/STP

M&L cutting and racking out joints of size 3mm x 15mm with cutter and cleaning with blower and making sides of joints bitumen free for all joints and sealing the joints with, Hydrocel XL of Fosroc or equivalent in Sika/Bostik High performance, cross linked, closed cell,non-absorbent, polyethylene joint fi ller, then filling the top gap with polyurethane based sealant Colpor 200 PF of Fosroc or equivalent in Sika/Bostikover a coat primer including bond breaker caulked tightly into base of sealing groove complete all as per manufacturers instructions complete all as specified and as directed.

M & L for providing & applying white or yellow (Aisle) band Marking with 2 component polyeurathane resin + Hardner with flourescent (FK 666) on applied EPU flooring complete all as specified and as directed

M&L complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed

M/s. R.S. LAWANDE

M/S Kartik Enterprises

M/s VEEJEE ENTERPRISES

SACHIN CONSTRUCTIONS

Kakolil Trade Agencies

Super Construction

M/S P S BABU

M/S jvsr constructions