SPECIAL REPAIRS TO DRAINAGE AND SEWAGE LINE AT LAXMI TEK AREA, PROVN OF VEHICLE PARKING SHED FOR FOUR WHEELERS AND TWO WHEELERS AT LAXMI TEK I, PROVN OF COVERED CONNECTED PATHWAY FROM FAMILY WARD TO OPERATION THEATRE AT MILITARY HOSPITAL, BELGAUM UND

Amount

Notes: Being a special repairs of sewage system, contractor has to work while the line is operational.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified and as directed.

Description all as per item no :02 here in before but excavation for each additional 1.5 m or part thereof in depth beyond the first 1.5 m depth complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry 1:3:6 type C1 ( using20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C1, (Using 20 mm graded stone aggregate ) as in coping etc including necessary steel form work complete all as specified and as directed.

Material and labour for 15 mm thick Rendering on fair faces of PCC Block masonry or concrete surface in CM 1:4 using water proofing compound surface finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for 200mm RCC pipes class NP-2 ISI MARKED laid in trenches and jointed in cement mortar 1:3 complete with collar inclding demolition and breaking up PCC and drain pipes inclding demolition and breaking up PCC and SGSW/RCC drain pipes jointed in cement mortar and taking out of trenches and removal of debris off the premises complete all as specified and as directed.

Material and labour for Concrete bed to drain pipe 200mm dia including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded aggregate complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in haunching , surface channel/ benching inside the manhole ,surface finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Precast RCC slab 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slab and set in CM 1:6 including necessary steel moulds/form work complete all as specified and as directed.

Material and labour for RCC slab 1:2:4 type B-1 using 20 mm graded aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs complete all as specified and as directed .

Supply and fix Mild steel TMT bars of FE 500 or FE 550 D 8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Material and labour for Use of steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed "

Supply and fix Mild steel work as in manhole handle and the like confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Demolition of precast RCC manhole cover slab of any description and in any position (reinforcement cut as required to facilitate demolition) and removal of debris off the premises and scrap iron taken as credit complete all as specified and as directed.

Demolition of brick/stone work masonry wall built in cement mortar of any description and in any position and removal of debris off the premises and old brick bats taken as credit complete all as specified and as directed.

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil to a distance n exc 50 metre and deposited where directed at a level n exc 1.5 metre above starting point in soil complete all as specified and as directed.

Material and labour for Cutting into existing man hole for connecting new drain pipe of 200mm dia making good to pipe and rendering cutting out existing benching for and forming bench channel (half round or 3/4 section) in cement concrete 1:2:4 type B-1 , smooth finished and reforming benching as required complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make :Finolex/Supreme/Prince(ISI MARKED)

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Make :Finolex/Supreme/Prince(ISI MARKED)

Supply and fix 75mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Make :Finolex/Supreme/Prince(ISI MARKED)

Supply and fix 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Make :Finolex/Supreme/Prince(ISI MARKED)

Demolition of cement concrete in any description and in any position and removal of debris off the premises complete all as specified and as directed.

Material and labour for loose filling of broken bricks of gauge 80mm to 150 mm in soakge pit , soakage wells complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C1, (Using 20 mm graded stone aggregate ) 75 mm thick as in plinth protection ,finishing the surface fair and even in panels and filling the joints with mortar etc including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C1, (Using 20 mm graded stone aggregate ) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:2:4, type B1 (using 20 mm graded aggregate) as in cills, steps, bands, coping, bed plates , etc including necessary steel form work, complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Excavating in post holes each n. exc. 0.5 Cum getting out, in soft/loosesoil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good the surface complete all as specified and as directed.

Supply and fix Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix Rolled Mild steel work as in roof trusses (framed),,trussed, purlins , rails and fastenings and heavy bracket framing (Beam, tee,angles,channel or flat sections) including distance pieces ,cleats etc confirming to Fe-410 W (Gde-E-250) quality B complete all as specified and directed.

Supply and fix 5 mm thick Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165complete all as specified and as directed.

Supply and fix Mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exceeding 10 cm but not exceeding 15 cm complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Material and labour for Providing and laying 80mm thick factory made chamfered edge cement Concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

"Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately."

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc,complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Removing building materials etc. (other than spoil )to a distance of 100m or under, beyond the lead including loading, unloading and stacking at the destination exc 1 km total distance complete all as specified and as directed. Note :1 Load=100 cft

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed

Material and labour for Chequered cement concrete tile of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed.

Demolition of Reinforced Cement concrete as in roofs, floors (other than ground floors), beams, staircase, landings, chajjas and similar suspended work complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and includingPVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system and provision of FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area ,green colour connected to common earth dolly including provision of suitable size of incl 2nd HW board with sunmica top cover for mounting switches/sockets etc, for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells(ii) Make of PVC casing/capping: Avon Plast/Presto plast /Garware

Description all as per item No. 49 here in before but for One 05 Amps 3 pin socket outlet on independent board.

Description all as per item No. 49 here in before but for One 05 amps socket outlet on the same board with other switches

Description all as per item no :49 here in before but for one fan/Exhaust Fan point controlled by one switch and regulator.

Description all as per item no :49 but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core through PVC casing capping medium grade of size 25/20 mm, etc fixed on wall/ceiling of suitable size and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Switch piano type 5 Amps flush button 230 volts AC one way, complete all as specified and as directed.Make -Anchor / Indo Asian/Havells

Supply and fix Switch piano type 15 Amps flush button 230 volts AC one way, complete all as specified and as directed.Make -Anchor / Indo Asian/Havells

Supply and fix Socket outlet 5 Amps 3/5 pin combined flush type multipurpose complete all as specified and as directed. Make -Anchor (Roma)/Indo Asian/Havells

Supply and fix Socket outlet 15 Amps 3/5 pin combined flush type multipurpose complete all as specified and as directed. Make -Anchor (Roma)/Indo Asian / Havells

Supply and fix PVC or Polycarbonate ceiling rose 3 terminal , isolated body of size 63.5 x 20 mm, suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Material and labour for Submain wiring complete with 1100volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 04 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 4.0 sqmm PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :- 03 run of 04 sqmm including 01 run of PVC CONDUIT will be measured as one length for AC. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finolex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware"

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note :Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent in M/S Wipro/CG

Supply and fix LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed. Note : Make :Philips BRP050 LED 036 CW R1 MF PC S1 PSU GR equivalent in M/S Wipro/CG

Supply and fix Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed. Make : Anchor/Indo Asian/Rider

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) connected with 3 core PVC flexible copper cable Pre wired from ceiling rose to connector including taking down existing un serviceable ceiling fan from the location and setting aside for fixing/ depositing to MES E/M store yard. complete all as specified and as directed. Make : Orient/CG/Bajajt

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed on sunmica with wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed. Make: Indo Asian /L&T/Havells

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed. Make: Indo Asian /L&T/Havells

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Indo Asian/ Havells .

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete with connection testing all as specified and as directed Make - L&T / Indo Asian/ Havells .

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing all as specified and as directed Make - L&T / Indo Asian/ Havells .

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for laying of pipe line,cables etc and getting out in any type of soil complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 80 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

DHANSHRI ENTERPRISES

M/s. KIRAN M CHOUGULE

M/s B C CHOUGULE

M/S MAHADEV M PATIL

SAMARTH ASSOCIATES

M/s. VIJAY ELECTRICALS