PROVN OF VIEW CUTTER AT BOUNDARY WALL OF NEW AMRITSAR MILITARY STATION

Amount

S & F Mild steel work in posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling post or struts (wood, steel or RCC) any section embeded in concrete or brick work masonary, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and directed.

M&L Painting on steel surface exceeding 10cm width or girth and two coat of synthtic enamel paint over one coat of primer complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer as specified complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but not exc. 15cm long complete all as specified and directed.

Demolition of reinforced cement concerete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC (Nominal mix) Type B1 1:2:4 using 20mm graded stone aggregate as in coloumn,pillars,piers, posts and struts complete all as specified and as directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or scruing with clips complete all as specified and directed.

Description all as per srl item 9.00 here in before but except bars complete all as specified and directed. (Note : Old retrieved bars from Srl Item No 6.00 above shall be reused)

Description all as per srl item 9.00 here-in above 5mm dia and over as in stirrups complete all as specified and directed.

Description all as per srl item 11.00 here in before but except steel bars complete all as specified and directed. (Note : Old retrieved bars from Srl Item No 6.00 above shall be reused)

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with finished even and smooth without using extra cement complete all as specified

Dismantling of galvanized mild steel two strand barbed wire from old existing mild steel, RCC fencing posts etc. complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire of be measured) complete all as specified and directed. Note-Sample of Barbed wire to submitted for approval of EIC/GE before execution of above item.

M&L for preparation of OLD steel surfacces of any description not otherwise desribed, over 10cm width or girth and applying one coat of synthetic enamel paint omplete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extMR cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed.

AS CONSTRUCTION

SHRI GANESH CONSTRUCTION CO.

Santokh Singh and Associates

tarlok singh contractor

M/s Vijay Construction Co.