Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC SALKAVITA RAJA RARNMOHANPUR PO NORTH BENGAL UNIVERSITY DIST DARJEELING PIN 734013 | DARJEELING | WEST BENGAL | 734013 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹51.4 L+₹84,241 (1.67%)Rejected-Finance 54 SATYEN BOSE ROAD DESHBANDHUPARA SILIGURI 734 004 | JALPAIGURI | WEST BENGAL | 734004 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹52.0 L+₹1.4 L (2.81%)Rejected-Finance ATUL PRASAD SARANI DUDH MORE SILIGURI 06 DARJEELING WB | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹52.2 L+₹1.6 L (3.17%)Rejected-Finance EAST VIVEKANANDA PALLY MANGAL PANDEY SARANI PO RABINDRA SARANI SILIGURI 734 006 WB | JALPAIGURI | WEST BENGAL | 734006 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹52.5 L+₹1.9 L (3.80%)Rejected-Finance 45 9 6 BAGHAJATIN COLONY PO PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING WB | 734403 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
CERTAIN COMPREHENSIVE REPAIR AND OTHER MISC WORKS AT U AREA UNDER AGE B/R I OF GE SUKNA
2023_MES_591894_1
GE Sukna/8521
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Sukna
₹90,000
Yes
21 Jun 2023
28 Apr 2023
22 May 2023
28 Apr 2023
20 May 2023
13 May 2023
29 Apr 2023 - 20 May 2023
Amount
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or broken boulders complete all as specified and directed.
M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, sub base under floor, filling and mass concrete complete all as specified and directed.
M&L PCC 1:5:10 type E-2, (using 40 mm graded crushed stone aggregate) as in sunken portion complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.
M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in columns, pillars, posts and struts complete all as specified and directed.
M&L for Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in chajjas complete all as specified and directed
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
Supply only integral water proofing compound complete all as specified.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 but except bricks complete all as specified and directed. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick but except bricks complete all as specified and directed. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.
S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE)
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and as directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling of grid size 605 x 605 mm including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and including dismantling complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F mortice lock, vertical type, size 100 mm four lever of brass complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.
M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
S&F Mild steel screw bolts diameter of neck 16 to 20 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed.
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
M&L rolled mild steel conforming to Fe 290 (Gde E-165), in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and including distance pieces, cleats etc. complete all as specified and directed.
S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.
S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri
S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri
S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries
M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including taking down old AC roof sheets complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including taking down old AC roof sheets complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd
S&F non asbestos fibre cement building boards 4 mm thick (designer pattern) fixed or laid / inserted to GI framework with screws in seamless false ceiling (flat or sloping) of grid size 605 x 605 mm and including GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire and including dismantling complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of GI Grid :- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products
M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 20 mm thick screed bed CM 1:6 including sand cushioning complete all as specified and directed. Make :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles
M&L 75 mm thick, PCC 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) as in plinth protection, hardstanding, floors, paths, etc, finished even and smooth without using extra cement complete all as specified and directed.
M&L 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, sub base, mass concrete etc complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in sunken portion complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 and dismantling complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) Orient Bell Ltd / H & R Johnson India Ltd
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, as in skirting/dado on vertical surfaces over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 10 mm thick in CM 1:3 and dismantling complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Make :- Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn
M&L coloured glazed ceramic tiles 350 x 200 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and fair complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M&L 10 mm thick rendering in CM 1:3 in sunken portion, using water proofing compound as per manufacturers instructions finished even and fair complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finishcomplete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated on ceiling surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old decorated wall surface and including applying one coat of oil bound distemper complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar)
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F 3.00 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc. 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 125 mm wide & 450 mm long, with ABS chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag or equivalent in Gem / ESSCO / Parko
S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, & side not less than 300mm with ABS chromium plate bracket guard complete all as specified and directed. Make:- Prayag Cat No. - BEA-46 or equivalent in Gem / ESSCO / Parko
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old painted wooden surfaces of any description, not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old decorated/ painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coats of synthetic enamel paint complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints Paints Ltd)
S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
M&L cleaning the surfaces of sunken floor using wire brush, brooming down and washing down with water to remove dust etc. and including brushing with neat cement slurry @ 0.5 kg / sqm & one coat with acrylic based polymer modified cementitous composite @ 0.50 kg / sqm complete all as specified and directed.
S&F in repairs 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs 15 mm bore bib tap chromium plated fancy type long body, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs central hole basin mixer, brass, chromium plated, for mixing hot and cold water, with 450 mm Long Braided Hoses, screwed down for 15 mm bore pipe complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs brass chromium plated wall mixer with overhead shower arrangement, bend pipe, connecting legs and wall flanges complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
S&F in repairs 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- ESSCO or equivalent in Prayag / Gem / Parko
S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range)
S&F in repairs 32 mm bore PVC waste pipe for WHB / Sink /Urinal etc. complete all as specified and directed. Make:- Prayag Cat No - 327 or equivalent of Polytuf
S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repairs 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 grams) complete all as specified and directed. Make:- Prayag Cat No. 153 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repair 100 mm dia grating, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed. Make :- Prayagor equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range)
S&F in repairs 100 mm size swivel shower rose of ABS, chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- ESSCO or equibalent in Prayag / Gem / Parko
S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. Make of Water Closet:- Hindware, Cat No. - 20011 (Starwhite) or equivalent in Cera (Med Range) / Essco Make of Seat cover:- Hindware, Model - Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco
S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco
S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for european water closet pan complete all as specified and directed. Make:- Hindware, Model - Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco
Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.
Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section, in any position complete all as specified and directed.
Dismantling wrought iron or mild steel / structural steel work of any description not otherwise provided for complete all as specified and directed.
M/S G S ASSOCIATES
MS ESSCON
PS ENTERPRISE
Jagatbandhu Enterprises
G C DUTTA N CO
M/S GLORIOUS CONSTRUCTION
DEBABROTA ROY CHOWDHURY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .