REPAIR TO BOUNDARY WALL IN TECH AND DOMESTIC AREA INCL CONCERTINA COIL , BARBED WIRE , OTHER MISC B/R REPAIR WORKS AND REPAIR TO FENCING, RETAINING WALL ETC AT AFS MADH ISLAND UNDER GE (AF)THANE

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Raking out joints /pointing to random or polygonal ruble uncoursed walls built in cement mortar complete all as specified and directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 but except stone complete all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses in CM 1:3 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints,as specified, of random rubble walling,uncoursed or brought upto courses and dressed surface n. exc. 20mm complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in copings ,apex stones, kerbs rounded or chamfered angles and throating complete all as specified and directed.

S&F 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in trenches or in wallscomplete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L use and waste of formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified and directed.

S&F posts and struts, brackets in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed .

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth , not otherwise described and apply two coats of synthetic enamel paint over a coat of anti rust zinc chrome primer complete all as specified. complete all as specified and directed.

S&F in repair,concertina coil fencing with punched tape concertina coil 600 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with galvanised iron staples and galvanised iron clips to retain horizontal, including necessary bolts or galvanised iron barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre complete all as specified and directed by Engr-In-Charge. Note:- MS angle will be measured and paid separately.

S & F in repair for galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire steples or steel pins complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth , not otherwise described and apply two coats of synthetic enamel paint over a coat of anti rust zinc chrome primer complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground, complete all as specified.

Dismantling fencing wire mesh ( chain link fencing) , any type or description, complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, complete all as specified.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in foundation of filling of columns, pillars, posts etc complete all as specified.complete all as specified and directed.

S&F Mild steel round bars bars 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and fixed as in repairs, complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n.exc 10cm long and dia 11 to 15 of neck, complete all as specified.

Supply only PVC coated ultraviolet resistant chain link fencing ( Minimum wt 2.0kg/sqm) 75mm x 75mm of 3mm or as per directed GI mesh size,1mm PVC quoted all round the mesh wire, complete all as specified and directed by Engr-In-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paintover a coat of red oxide primer all as specified and directed.

M&L for 75 mm cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as sub base, foundations, filling & mass concrete complete all as specified.complete all as specified and directed.

M&L for rubber moulded glossy finish coloured chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-In-Charge.

M&L use and waste of formwork to sides of PCC bands in walls, horizontal or sloping and similar works, complete all as specified and directed.

Removing of debris / earth obtained from demolition items / excavation including loading /unloading etc outside MD Land, upto 60 KM as per BMC guidelines complete all as specified and directed by Engr-In-Charge.

Please Enable Macros to View BoQ information