Construction of Additional 2 Rooms at PHC Building at Dharam A

Amount

Earh work in Bulk excavation by manual means over areas ( exceeding 30 cm and up to 1.5 mtr in width and 1.5 mtr in depth as well as 10 sqm on plan ) incl. disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of soil.

Providing and laying of cement concrete of specified grade concrete in 1:4:8 all work upto plith with 40mm nominal size aggregates.Including loading,unloading and carriage of materials

Providing and laying of cement concrete of specified grade concrete in (1:3:6) all work upto plith with 20mm nominal size aggregates and 30% boulders.Including loading,unloading and carriage of materials

Providing and laying of rienforced cement concrete of specified grade concrete in (1:1.5:3) all work upto plith with 20mm nominal size aggregates.Including loading,unloading and carriage of materials

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 (1 cement :6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Providing/fixing pressed steel door/windows frames conforming to IS:4351 of mild steel i/c all complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for RCC work including cutting. Bending, binding and placeing in position all complete.

Centering and shuttering i/c strutting propping etc. for foundations, footings, bases of columns etc. complete.

Centering and shuttering i/c strutting propping etc. for suspended floors etc. complete.

Centering and shuttering i/c strutting propping etc. for lintel beams,plinth beams etc. complete.

Centering and shuttering i/c strutting propping etc. for edges of slabs etc. complete.

P/F of MS grill of required pattern in frames of doors/windows/ventilators etc. including cutting. Bending, binding and placeing in position all complete.

15 mm thick cement:sand plaster of specified grade mix 1:6 mix(1 cement:6 Fine sand).

12 mm thick cement:sand plaster of specified grade mix 1:4 mix (1 cement:4 Fine sand.

Providing and laying in position 50mm flooring of cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth as coping in 1:2:4 mix

Providing and fixing 40 mm wide and 4 mm thick strips in joints of 50mm thick cement concrete flooring.

Providing/fixing of 35mm thick panelled or panelled and glazed shutters for doors windows along with butt hinges all complete of Ist class Kail wood.

Providing/fixing of panelling or panelling and glazing in panelled or panelled and glazed doors all complete of Ist class Kail wood.

Providing/fixing of 35mm thick panelled or panelled and glazed shutters for doors windows along with butt hinges all complete of Ist class Kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood

Dumping of stones in horizontal including cost of stone all complete

Supplying and Fiiling of sand under plinth

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with Synthetic enemel paint of approved brand and manufacture.

Making Plinth protection 50mm thick 60CM wide in 1:3:6 mix over 100mm thick stone soling.

Providing/fixing of Electrification consealed type all complete job.

Provision for Citizen Information board

Fayaz Ahmed

RANJEET SINGH

SHAFIQ AHMED RUNYAL