SPL REPAIR OF OR LIVING BLDG NO P-29 AT OTM ACCN OF JAK RIF AND PROVN OF VEH PARKING NEAR APS AT NAMS

Amount

Taking down Chowkhat or frame not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down of shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) including taking down of old shutter and making good complete all as specified and directed.

S & F factory made 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style including taking down of old shutter and making good complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free solid board , 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19mm x19mm frame structure complete all as specified & directed Make:- rajshri Plastiwood or M/s Solutions New Delhi or M/s Kumar Arch Tech Ltd or equivalent of other Make as approved by GE from list of makes attached with tender documents.

S&F Solid PVC Door frame of sizes 95mm x 50 mm made out of 5 mm laminted both side colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F in repairs 18/19 mm thick prelaminated Particle board exterior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber/steel frame work as in cup board shutters/ shelves including 02 Nos 100mm aluminium handles, 01 No. 100mm hasp and staples for each shutter complete all as specified and directed.

S&F, in repairs, 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet complete all as specified and directed. (Note:- Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately)

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.

S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one coast of primer complete all as specified and directed. Note : Including taking down old steel ventelator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S&F in repair 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane incl hacking out glass old complete all as specified and directed.

S&F 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F 100mm long cold rolled mild steel medium weight butt hinges welded or screwed to steel, aluminium and wooden chawkhat complete all as specified and directed.

S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.

Dismantling of brick works in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.

Description all as per item No 23.00 above but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) incl WPC @3% weight of cement complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer incl a thin layer of J K wall care putty complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted surfacces of steel of any description, n exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for applying two coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour) over one coat applied under Srl item No 38.00 above

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of white wash on ceiling surface complete all as specified

M&L for Applying 1 mm thick wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

Material and labour for preparation of old wooden surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.

Material and labour for preparation of steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, slab , RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth on brick masonry wall complete all as specified and directed.

S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.

S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing making good to facing for conceled water tubinng etc. cutting exeeding 10cm but not exeeding 20 cm girth on brick masonry in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.

S&F 25 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, incl taking down old pipe complete all as specified and directed.

Supplying, fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified in SSR Part-I complete all as specified and directed. make Sintex

M&L for Demolition of reinforced cement concrete of cover slab/cooking platfrom and RCC roof tank etc complete all as specified and directed.

M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed.

S& F, in repair vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as specified and directed by Engr-in-charge.

S & F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including 32 mm dia PVC waste pipe (Plain) ,32mm dia Chromium plated waste coupling complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan 'orissa pattern size 580x440 white with integral foot rests incl `P' or `S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete and making good to floor complete all as specified and directed.

S&F, in repair, vitreous china floor mounted singel peace WC with PP soft close seat cover , hinges accessories set as per size 375x660x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed. Make Jaquar/Perry ware/Hidware.

S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. Make : Cera /Jagaur/Perry ware/Hind ware

S&F in repairs 15 mm bore dia chromium plated urinal spreader fixed complete all as specified and directed.

S&F in repair, overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as specified and directed.

S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed.

S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore dia fancy type chromium plated long shank and cup stop valves (Concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore dia swan neck fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as specified and directed.

S&F 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.

S&F, in repairs, brass, chromium plated tubular towel rail 20mm dia 60cm long between flanges as specified and directed.

S&F in repair Towel ring round with round flange complete as specified and directed. .

S&F in repair Soap Dispenser with glass bottle as specified and directed

S&F, in repair, CP, soap dish holder complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 100 mtrs where directed complete all as specified and directed.

M & L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement including 22m wide and 3mm thick glass deviding strip inserted in position to conform to design complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in cover slabs (for drain.) , and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in Slabs supported on walls, beams/lintel , landings, balconies, canopies, deck slabs and shelves including necessary form work complete all as specified and directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for Non skid ceramic wooden pattern or any colour coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishesincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for Non skid ceramicwooden pattern or any colour coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for heavy step and riser 8 to 9mm thick size300mmx1200mm, 200mmx1200mm or and landiing as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) inlcuding demolition complete all as specified and directed.

M & L for 8 mm thick Kota Green tiles laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishingand incl dismantling / demolition and rubbish off the primises complete all as specified and directed.

M&L for 18-20mm thick black granite stone (of any type) machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture or pigment to match the shade of stone in window cills, jams,cooking platform pillars etc.laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and rubbing and polishing complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed.

M&L for mirror polishing for old kota stone complete all as specified and directed by Engr-in-charge

M&L for 200mm bore dia RCC Class NP 3 pipes laid and jointed with collar incl dismantling of old pipe by excavation, digging, bearking up etc, complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed.

Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor, even and smooth without using extra cement for further treatment complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) applied on primed surface by forced application of heat and roller, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed.

Description all as per item No 99.00 above but except bricks tiles complete all as specified and directed.

M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement in concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured sepaMRtely)

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed. ( Note:- WPC measured separately)

S&F in repair 40mm dia GI pipe medium grade 45 cm long for a spout pipe including necessary cutting of existing beam/slab and fixing with cement concrete 1:2:4 complete all as specified and directed.

S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.

S&F of 75mm PVC (SWR) /floor trap, plain with grating including jointing with solvent cement complete all as specified

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for 1mm thick wood grain printed PVC sheet fixed both side or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified & directed.

S&F ornamental stainless steel tubular pipes/sheets, pieces such as pipe caps globe at top 18 guage and grade 304 as in staircase railing including welding , moulding riveting nut and bolt with all necessary fitting complete as shown directed by Engineer-in-Charge

S&F in repair Door seal 4mm wide with Fibre Brush and metalic body complete. complete all as specified and directed.

M&L for repair to existing built in wooden /cup board,locks,hinges including necessary welding or fixing with appropriate screw over old existing surface complete all as specified and directed by Engr-In-charge.

Surfacre excavation not exceeing 30 cm deep and averaging 15cm deep in soft/loose soil complete all specified and as directed

Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L, for moulded machine pressed precast concrete interlocking paver block rubber moulded glossy finished with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks complete all as specified and directed.

M&l for stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished as directed.

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M & L for Point wiring in replacement with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.

Description all as per Srl item No 125.00 above but on the Indepedant board completeall as specified

Description all as per Srl item No 125.00 above but on the same board completeall as specified

Description all as per Srl item No 125.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65/50 mm two to three terminals complete all as specified.

Supply and fix in replacement MCB 40 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and fix in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Description all as per Srl item No 135.00 above but for 4.0 sqmm

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified. make:- havells/ssk/cona/indo asian/legrand/anchor

Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

S & F in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 amps complete all as specified and as directed.

Supply and Fix Storage water heater (Geyser) of 50 litre capacity 230V AC, 50HZ having element of 2 KW of COPPER/INCOLOY alloy , Rust proof outer body, high density PUF insulation, BEE 5 Star Rated ,Inner tank of SS 304 which can sustain pressure of minimum 7 Bar working pressure and having multifunction safety valve plug top , making electric and water connection complete all as specified.

AS CONSTRUCTION

M/s Vijay Construction Co.

tarlok singh contractor

Roop Sons and Co

ss enterprises

KARACHI ELECTRIC & TRADING CO.

Jaspal Construction Co.

kapoor and co

BABBAR ENGINEERS

DASHMESH BUILDERS