Loading
Loading…
Loading…
Tender Value
₹40.6 L
EMD Value
₹81,167
Closing Date
5 Oct 2026, 4:00 pm7d left
EE(Education wing)
ROOM NO.1608, 16TH FLOOR, PALIKA KENDRA, NEW DELHI MUNICIPAL COUNCIL
Covering of boundary wall with G.I Sheet ,covering of corridor openning with MS Jali with Hard Drawn Wire and Themetic painting corridor walls and allied civil work in Anchal School
2026_NDMC_298973_1
11/EE/EDU.WING/26-27
Open Tender
Civil Works
Works
60 days
NDMC Area
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹81,167
25 Sept 2026
25 Sept 2026
5 Oct 2026
25 Sept 2026
5 Oct 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 713 | Square Metre | 24.45 | ₹17,432.85 |
| 2 | Dismantling of old Bamboo jaffery/ fencing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc. complete as per direction and entire satisfaction of Engineer -in -charge | 697 | Square Metre | 9.85 | ₹6,865.45 |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: FRP Sheet | 122 | Square Metre | 154.65 | ₹18,867.3 |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing
of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m. All kinds of soil. | 68 | Cubic Metre | 253.04 | ₹17,206.72 |
| 5 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | 294 | Kilogram | 35.77 | ₹10,516.38 |
| 6 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within
50 metres lead. | 315 | Kilogram | 5.49 | ₹1,729.35 |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 1,861 | Kilogram | 167.79 | ₹3,12,257.19 |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,
including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. | 5,675 | Kilogram | 188.98 | ₹10,72,461.5 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 989 | Square Metre | 151.55 | ₹1,49,882.95 |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge)
of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self
drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required | 697 | Square Metre | 718.06 | ₹5,00,487.82 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.42 MB
BOQ_398921.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .