Special repair to existing area drainage and boundary wall at AHQ Camp, Lodhi road, New Delhi under GE New Delhi, Delhi Cantt-10

Amount

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of brick work built in Cement mortar or cement lime mortar including all quoins, arches , pillar etc. all as directed .

M&L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface etc. finished even & smooth without using extra cement complete all as specified and directed.

M&L for two coat of cement base paint (as approved) over a coat of primer on walls including preparation of newly plastered surface of walls all as specified and directed

Dismantling wrought iron or mild steel work of any description including barbed wire not otherwise provided for complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including boundary pillars and post (including caps and bases) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any in any position not otherwise specially provided for complete all as specified and directed.

M&L for mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips for using in slabs, beams and in foundations, complete all as specified and directed.

Ditto, as per item 8.00 here-in-before but up to and including 10 mm dia in stirrups, spacers and binders as in columns .

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in columns, pillars etc. complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, column and stanchions complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wires etc., flat iron fillets(for securing wire) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-410 or Fe-310 complete all as specified and directed

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

M&L for preparation of new steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with two coats of synthetic enamel paint over primer with complete all as specified and directed.

Taking down cement plaster on brick or stone walls/ ceiling etc. including racking out of joints hacking for key, scrubbing down with water and disposal or rubbish out side defence land complete all as specified and directed

S&F punched tape concertina coil 610mm dia (after stretching to a length of 10 meters, weight not less than 15.74 kg per 10 RM of length) having 50 Nos rounds per 5.4 meter length, including, securing or tying at crossing with 'J' clip and cotter pin with core wire diameter 2.50 mm, zinc coating on wire 40 to 80 GSM, thickness of wrap strip 0.5 mm with zinc coating 80 to 120 GSM, barb length 11 mm, barb width 19 mm (before wrapping of core wire), barb spacing 24 mm centre to centre, tensile strength 165 kg/Sqmm, including taking down of old concertina coil complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any in any position not otherwise specially provided for complete all as specified and directed.

M&L for PCC (1:2:4) Type B1 using 20 mm graded aggregate, in lintels up to 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Excavating in trenches not exc. 1.5 m wide & n.exc 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes pier holes etc. not exc. 10 Sqm on plan & not exc. 1.5 m depth & getting out in hard/dense soil.

Returning, filling in including spreading levelling watering & well ramming in layers not exe. 25 cm in hard/dense soil.

Removing excavated material exc. 250 m but n.exe 500 & deposited where directed.

M&L for Cement Concrete 1:5:10 type E-2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C-2 (40 mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exe 6 m mean radius built in CM 1:4 complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate)in landings, cover slabs for drain or (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and other similar work articles with plain faces set in cement mortar 1:4 complete all as specified and directed .

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering(drain covering etc.). Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410-W(Gde-E-250) quality-A complete all as specified and directed by Engr-in-Charge

M&L for 15 mm thick cement plastering in CM 1:4 on other than fair faces of brick surface etc. finished even & smooth using extra cement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges or coping on drain wall etc. complete all as specified and directed.

Pushkar Dutt Bhatt

R D ENTERPRISES

BEHAL TRADERS

B Kumar and Co

Shivam Firetech Engineers

RISHU CONSTRUCTION COMPANY