CONSTRUCTION OF NEW COURT BUILDING (STILT GROUND 3 FLOOR) (15 COURT HALL) AT BARSHI,TALUKA BARSHI,DISTRICT SOLAPUR.

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramilimetreing, watering including shoring and strutting exectra complete. By Mechanical Means For all Leads & lifts

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramilimetreing, watering including shoring and strutting complete By Mechanical Means For all Leads & lifts

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramilimetreing, watering including shoring and strutting exectra. complete By Mechanical Means For all Leads & lifts

Excavation for foundation in Hard rock by blasting including trimilimetreing and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramilimetreing, complete By Mechanical Means For all Leads & lifts

Providing preconstructional antitermite treatment as per Indian Standard 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and fixing 20 to 25milimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25milimetre between rough shahabad and Reinforced Cement Concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35milimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/-with ponding test exectra complete.(excluding Cement concrete 1:3:6 base concrete)

Providing preconstructional antitermite treatment as per Indian Standard 6313(Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 Cement Mortar diametre about 30-60cm deep at 15 Centimeter Centre to Centre as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting exectra. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing exectra. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.(Wooden centering will not be allowed.), with fully automatic micro processor based Programinable logincal control with /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) Supervisory control and Data Acquilistion

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete. work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions exectra. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) exectra. complete, with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (2nd Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (3rd Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (2nd Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Third Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Second Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Third Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Third Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing exectra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Third Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.) with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.) with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.) with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.) with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortor 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing exectra. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin exectra.) with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion /concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Third Floor)

Providing and fixing in position Thermomechanically trented Ferrous -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches exectra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Third Floor)

Providing and fixing in position Thermomechanically trented Ferrous-500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches exectra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Ground Floor)

Providing and fixing in position Thermomechanically trented Ferrous-500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches exectra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (First Floor)

Providing and fixing in position Thermomechanically trented Ferrous-500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches exectra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Second Floor)

Providing and fixing in position Thermomechanically trented Ferrous-500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches exectra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Third Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering exectra. Complete. (Stilt Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding exectra. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Stilt Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding exectra. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Ground Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding exectra. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (First Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding exectra. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Second Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding exectra. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Third Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6milimetre diameter/2 hoop iron strips 25milimetre X 1.6milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering exectra. complete. (Stilt Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6milimetre diameter/2 hoop iron strips 25milimetre X 1.6milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering exectra. complete. (Ground Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6milimetre diameter/2 hoop iron strips 25milimetre X 1.6milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering exectra. complete. (First Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6milimetre diameter/2 hoop iron strips 25milimetre X 1.6milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering exectra. complete. (Second Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6milimetre diameter/2 hoop iron strips 25milimetre X 1.6milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering exectra. complete. (Third Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(exterior Columns) with plain premoulded filler 25milimetre thick and 3milimetre thick alluminium plate, hold fast, fixing Teak wood battens on internal face, finishing exectra. complete as directed. (Stilt Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(exterior Columns) with plain premoulded filler 25milimetre thick and 3milimetre thick alluminium plate, hold fast, fixing Teak wood battens on internal face, finishing exectra. complete as directed. (Ground Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(exterior Columns) with plain premoulded filler 25milimetre thick and 3milimetre thick alluminium plate, hold fast, fixing Teak wood battens on internal face, finishing exectra. complete as directed. (First Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(exterior Columns) with plain premoulded filler 25milimetre thick and 3milimetre thick alluminium plate, hold fast, fixing Teak wood battens on internal face, finishing exectra. complete as directed. (Second Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(exterior Columns) with plain premoulded filler 25milimetre thick and 3milimetre thick alluminium plate, hold fast, fixing Teak wood battens on internal face, finishing exectra. complete as directed. (Third Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(at terrace level) with premoulded filler 25milimetre thick and 3milimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and Teak wood battens on inner face finishing exectra. Complete as directed. (Stilt Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(at terrace level) with premoulded filler 25milimetre thick and 3milimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and Teak wood battens on inner face finishing exectra. Complete as directed. (Ground Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(at terrace level) with premoulded filler 25milimetre thick and 3milimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and Teak wood battens on inner face finishing exectra. Complete as directed. (First Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(at terrace level) with premoulded filler 25milimetre thick and 3milimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and Teak wood battens on inner face finishing exectra. Complete as directed. (Second Floor)

Providing expansion joints in Reinforced Cement Concrete framed structure(at terrace level) with premoulded filler 25milimetre thick and 3milimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and Teak wood battens on inner face finishing exectra. Complete as directed. (Third Floor)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting exectra. complete. (Stilt Floor)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction exectra. complete. (Stilt Floor)

Providing preconstructional antitermite treatment as per Indian Standard 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Stilt Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire exectra. complete. (Stilt Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire exectra. complete. (Ground Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire exectra. complete. (First Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire exectra. complete. (Second Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire exectra. complete. (Third Floor)

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing exectra. complete. (Stilt Floor)

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing exectra. complete. (Ground Floor)

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing exectra. complete. (First Floor)

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing exectra. complete. (Second Floor)

Providing internal cement plaster 12milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing exectra. complete. (Third Floor)

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing exectra.complete. (Stilt Floor)

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing exectra.complete. (Ground Floor)

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing exectra.complete. (First Floor)

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing exectra.complete. (Second Floor)

Providing internal cement plaster 20milimetre thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing exectra.complete. (Third Floor)

Providing and applying plaster with plaster of paris in 6milimetre thickness to previously plaster surface in all position including preparing the surface scaffolding exectra. complete. (Stilt Floor)

Providing and applying plaster with plaster of paris in 6milimetre thickness to previously plaster surface in all position including preparing the surface scaffolding exectra. complete. (Ground Floor)

Providing and applying plaster with plaster of paris in 6milimetre thickness to previously plaster surface in all position including preparing the surface scaffolding exectra. complete. (First Floor)

Providing and applying plaster with plaster of paris in 6milimetre thickness to previously plaster surface in all position including preparing the surface scaffolding exectra. complete. (Second Floor)

Providing and applying plaster with plaster of paris in 6milimetre thickness to previously plaster surface in all position including preparing the surface scaffolding exectra. complete. (Third Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding exectra.complete. (Stilt Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding exectra.complete. (Ground Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding exectra.complete. (First Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding exectra.complete. (Second Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding exectra.complete. (Third Floor)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge exectra. complete. (Stilt Floor)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge exectra. complete. (Ground Floor)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge exectra. complete. (First Floor)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge exectra. complete. (Second Floor)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge exectra. complete. (Third Floor)

Providing patti/band 75milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Stilt Floor)

Providing patti/band 75milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Ground Floor)

Providing patti/band 75milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (First Floor)

Providing patti/band 75milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Second Floor)

Providing patti/band 75milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Third Floor)

Providing patti/band 100milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Stilt Floor)

Providing patti/band 100milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Ground Floor)

Providing patti/band 100milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (First Floor)

Providing patti/band 100milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Second Floor)

Providing patti/band 100milimetre wide on plastered surface 12milimetre to 15milimetre thick in Cement Mortor 1:3 line and level including neat finishing scaffolding curing exectra. complete. (Third Floor)

Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortor1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortor1:3 admixed with approved water proofing compound and finally top finishing with average 20milimetre. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300milimetre x 300milimetre. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test exectra. complete. (Second Floor)

Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortor1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortor1:3 admixed with approved water proofing compound and finally top finishing with average 20milimetre. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300milimetre x 300milimetre. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test exectra. complete. (Third Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25milimetre thick in Cement Mortor 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test exectra. complete. (Stilt Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25milimetre thick in Cement Mortor 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test exectra. complete. (Ground Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25milimetre thick in Cement Mortor 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test exectra. complete. (First Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25milimetre thick in Cement Mortor 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test exectra. complete. (Second Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25milimetre thick in Cement Mortor 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test exectra. complete. (Third Floor)

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetre to 20milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning exectra. complete. (Stilt Floor)

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetre to 20milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning exectra. complete. (Ground Floor)

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetre to 20milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning exectra. complete. (First Floor)

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetre to 20milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning exectra. complete. (Second Floor)

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetre to 20milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning exectra. complete. (Third Floor)

Providing and fixing machine cut machine polished 18milimetre to 20milimetre thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning exectra. complete. (Stilt Floor)

Providing and fixing machine cut machine polished 18milimetre to 20milimetre thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning exectra. complete. (Ground Floor)

Providing and fixing machine cut machine polished 18milimetre to 20milimetre thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning exectra. complete. (First Floor)

Providing and fixing machine cut machine polished 18milimetre to 20milimetre thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning exectra. complete. (Second Floor)

Providing and fixing machine cut machine polished 18milimetre to 20milimetre thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning exectra. complete. (Third Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing exectra. complete. (Stilt Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing exectra. complete. (Ground Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing exectra. complete. (First Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing exectra. complete. (Second Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing exectra. complete. (Third Floor)

Providing and laying handcut polished Kotah Stone flooring 25milimetre to 30milimetre thick and 30cm wide in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning exectra. complete. (Stilt Floor)

Providing and laying handcut polished Kotah Stone flooring 25milimetre to 30milimetre thick and 30cm wide in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning exectra. complete. (Ground Floor)

Providing and laying handcut polished Kotah Stone flooring 25milimetre to 30milimetre thick and 30cm wide in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning exectra. complete. (First Floor)

Providing and laying handcut polished Kotah Stone flooring 25milimetre to 30milimetre thick and 30cm wide in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning exectra. complete. (Second Floor)

Providing and laying handcut polished Kotah Stone flooring 25milimetre to 30milimetre thick and 30cm wide in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning exectra. complete. (Third Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Flooring (Stilt Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Flooring (Ground Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Flooring (First Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Flooring (Second Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Flooring (Third Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25milimetre to 30milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Stilt Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25milimetre to 30milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Ground Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25milimetre to 30milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (First Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25milimetre to 30milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Second Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25milimetre to 30milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Third Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Skirting (Stilt Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Skirting (Ground Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Skirting (First Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Skirting (Second Floor)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing exectra. complete. For Skirting (Third Floor)

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness(on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning exectra .complete. (Stilt Floor)

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness(on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning exectra .complete. (Ground Floor)

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness(on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning exectra .complete. (First Floor)

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness(on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning exectra .complete. (Second Floor)

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness(on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning exectra .complete. (Third Floor)

Providing and laying vitrified matt finish tiles having size 590milimetre to 605milimetre x to 605milimetre of 8 to 10milimetre thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning exectra. complete. (Stilt Floor)

Providing and laying vitrified matt finish tiles having size 590milimetre to 605milimetre x to 605milimetre of 8 to 10milimetre thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning exectra. complete. (Ground Floor)

Providing and laying vitrified matt finish tiles having size 590milimetre to 605milimetre x to 605milimetre of 8 to 10milimetre thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning exectra. complete. (First Floor)

Providing and laying vitrified matt finish tiles having size 590milimetre to 605milimetre x to 605milimetre of 8 to 10milimetre thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning exectra. complete. (Second Floor)

Providing and laying vitrified matt finish tiles having size 590milimetre to 605milimetre x to 605milimetre of 8 to 10milimetre thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning exectra. complete. (Third Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to Indian Standard15622/2006(group D II-A) and 7 to 8milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with Ivory/colour cement slurry cleaning curing exectra. complete. (Stilt Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to Indian Standard15622/2006(group D II-A) and 7 to 8milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with Ivory/colour cement slurry cleaning curing exectra. complete. (Ground Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to Indian Standard15622/2006(group D II-A) and 7 to 8milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with Ivory/colour cement slurry cleaning curing exectra. complete. (First Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to Indian Standard15622/2006(group D II-A) and 7 to 8milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with Ivory/colour cement slurry cleaning curing exectra. complete. (Second Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to Indian Standard15622/2006(group D II-A) and 7 to 8milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with Ivory/colour cement slurry cleaning curing exectra. complete. (Third Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with Ivory/colour cement slurry cleaning curing exectra. complete. (Stilt Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with Ivory/colour cement slurry cleaning curing exectra. complete. (Ground Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with Ivory/colour cement slurry cleaning curing exectra. complete. (First Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with Ivory/colour cement slurry cleaning curing exectra. complete. (Second Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with Ivory/colour cement slurry cleaning curing exectra. complete. (Third Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20milimetre thick for door frame/dado/window boxing exectra. On Cement Mortor 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, exectra. complete. (Stilt Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20milimetre thick for door frame/dado/window boxing exectra. On Cement Mortor 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, exectra. complete. (Ground Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20milimetre thick for door frame/dado/window boxing exectra. On Cement Mortor 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, exectra. complete. (First Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20milimetre thick for door frame/dado/window boxing exectra. On Cement Mortor 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, exectra. complete. (Second Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20milimetre thick for door frame/dado/window boxing exectra. On Cement Mortor 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, exectra. complete. (Third Floor)

Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60milimetre thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30milimetre thick including skirting joints and cleaning exectra. complete. (Stilt Floor)

Providing and laying chequered tiles of approved quality of size 30cm x 30cm, confirming to corresponding Indian Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing exectra. complete. (Stilt Floor)

Providing and laying Rough Shahabad Stone Flooring 50milimetre to 60milimetre thick and of required width in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning exectra. exectra. complete. (Stilt Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, exectra. complete (Stilt Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, exectra. complete (Ground Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, exectra. complete (First Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, exectra. complete (Second Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300milimetre x 40milimetre x 5milimetre with oil painting, exectra. complete (Third Floor)

Providing and fixing partition with kadappa stone of all sizes and 25milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning exectra complete. (Stilt Floor)

Providing and fixing partition with kadappa stone of all sizes and 25milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning exectra complete. (Ground Floor)

Providing and fixing partition with kadappa stone of all sizes and 25milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning exectra complete. (First Floor)

Providing and fixing partition with kadappa stone of all sizes and 25milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning exectra complete. (Second Floor)

Providing and fixing partition with kadappa stone of all sizes and 25milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning exectra complete. (Third Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600milimetre x 450milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30milimetre thick supports with kadappah top 35 to 40milimetre thick and polished granite 16 to 20milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite exectra. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Stilt Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600milimetre x 450milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30milimetre thick supports with kadappah top 35 to 40milimetre thick and polished granite 16 to 20milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite exectra. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Ground Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600milimetre x 450milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30milimetre thick supports with kadappah top 35 to 40milimetre thick and polished granite 16 to 20milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite exectra. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (First Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600milimetre x 450milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30milimetre thick supports with kadappah top 35 to 40milimetre thick and polished granite 16 to 20milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite exectra. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Second Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600milimetre x 450milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30milimetre thick supports with kadappah top 35 to 40milimetre thick and polished granite 16 to 20milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite exectra. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Third Floor)

Providing and fixing 34milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30milimetre thickness lipped with 15milimetre(5milimetre x 3) thick x 30milimetre width on one style and top rail and 10milimetre(5milimetre x 2) thick x 30milimetre width on other style and bottom rails. The inner panels laminated with 2milimetre thick termite proof, water proof and fire resistant moulded Polyvinyl chloride sheet with 2, 4, 6 design in different plain and/or prelim colours on one side after routing the moulded design on flush doors and 2milimetre plain and/or pre lam Polyvinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Polyvinyl chloride lipping exectra. as per direction of Engineer in charge and manufacturers specification and drawing exectra. complete. (Stilt Floor)

Providing and fixing 34milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30milimetre thickness lipped with 15milimetre(5milimetre x 3) thick x 30milimetre width on one style and top rail and 10milimetre(5milimetre x 2) thick x 30milimetre width on other style and bottom rails. The inner panels laminated with 2milimetre thick termite proof, water proof and fire resistant moulded Polyvinyl chloride sheet with 2, 4, 6 design in different plain and/or prelim colours on one side after routing the moulded design on flush doors and 2milimetre plain and/or pre lam Polyvinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Polyvinyl chloride lipping exectra. as per direction of Engineer in charge and manufacturers specification and drawing exectra. complete. (Ground Floor)

Providing and fixing 34milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30milimetre thickness lipped with 15milimetre(5milimetre x 3) thick x 30milimetre width on one style and top rail and 10milimetre(5milimetre x 2) thick x 30milimetre width on other style and bottom rails. The inner panels laminated with 2milimetre thick termite proof, water proof and fire resistant moulded Polyvinyl chloride sheet with 2, 4, 6 design in different plain and/or prelim colours on one side after routing the moulded design on flush doors and 2milimetre plain and/or pre lam Polyvinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Polyvinyl chloride lipping exectra. as per direction of Engineer in charge and manufacturers specification and drawing exectra. complete. (First Floor)

Providing and fixing 34milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30milimetre thickness lipped with 15milimetre(5milimetre x 3) thick x 30milimetre width on one style and top rail and 10milimetre(5milimetre x 2) thick x 30milimetre width on other style and bottom rails. The inner panels laminated with 2milimetre thick termite proof, water proof and fire resistant moulded Polyvinyl chloride sheet with 2, 4, 6 design in different plain and/or prelim colours on one side after routing the moulded design on flush doors and 2milimetre plain and/or pre lam Polyvinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Polyvinyl chloride lipping exectra. as per direction of Engineer in charge and manufacturers specification and drawing exectra. complete. (Second Floor)

Providing and fixing 34milimetre thick moulded door shutter consisting of solid core single leaf flush door of 30milimetre thickness lipped with 15milimetre(5milimetre x 3) thick x 30milimetre width on one style and top rail and 10milimetre(5milimetre x 2) thick x 30milimetre width on other style and bottom rails. The inner panels laminated with 2milimetre thick termite proof, water proof and fire resistant moulded Polyvinyl chloride sheet with 2, 4, 6 design in different plain and/or prelim colours on one side after routing the moulded design on flush doors and 2milimetre plain and/or pre lam Polyvinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Polyvinyl chloride lipping exectra. as per direction of Engineer in charge and manufacturers specification and drawing exectra. complete. (Third Floor)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35milimetre thick as per detailed drawing consistingpanelled vertical styles 100milimetre x 35milimetre and lock and bottom rail 200milimetre x 35milimetre and panels 12milimetre thick both side comilimetreercial ply faced particle board including stainless steel fixtures and fastening and Teak wood beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting exectra. complete. (Stilt Floor)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35milimetre thick as per detailed drawing consistingpanelled vertical styles 100milimetre x 35milimetre and lock and bottom rail 200milimetre x 35milimetre and panels 12milimetre thick both side comilimetreercial ply faced particle board including stainless steel fixtures and fastening and Teak wood beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting exectra. complete. (Ground Floor)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35milimetre thick as per detailed drawing consistingpanelled vertical styles 100milimetre x 35milimetre and lock and bottom rail 200milimetre x 35milimetre and panels 12milimetre thick both side comilimetreercial ply faced particle board including stainless steel fixtures and fastening and Teak wood beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting exectra. complete. (First Floor)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35milimetre thick as per detailed drawing consistingpanelled vertical styles 100milimetre x 35milimetre and lock and bottom rail 200milimetre x 35milimetre and panels 12milimetre thick both side comilimetreercial ply faced particle board including stainless steel fixtures and fastening and Teak wood beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting exectra. complete. (Second Floor)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35milimetre thick as per detailed drawing consistingpanelled vertical styles 100milimetre x 35milimetre and lock and bottom rail 200milimetre x 35milimetre and panels 12milimetre thick both side comilimetreercial ply faced particle board including stainless steel fixtures and fastening and Teak wood beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting exectra. complete. (Third Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150milimetre x 44.5milimetre x 3.00milimetre thick top rails 47.62 x 44.45milimetre x 3.00milimetre thick, vertical style 47.62 x 44.45milimetre, 3.00milimetre thick and for shutter plain glass panes 5milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels exectra., Indian StandardI. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, Polyvinyl chloride gaskets, 250milimetre length aluminium tower bolts, 150milimetre dia. pad handle, exectra. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment exectra.complete (Stilt Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150milimetre x 44.5milimetre x 3.00milimetre thick top rails 47.62 x 44.45milimetre x 3.00milimetre thick, vertical style 47.62 x 44.45milimetre, 3.00milimetre thick and for shutter plain glass panes 5milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels exectra., Indian StandardI. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, Polyvinyl chloride gaskets, 250milimetre length aluminium tower bolts, 150milimetre dia. pad handle, exectra. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment exectra.complete (Ground Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150milimetre x 44.5milimetre x 3.00milimetre thick top rails 47.62 x 44.45milimetre x 3.00milimetre thick, vertical style 47.62 x 44.45milimetre, 3.00milimetre thick and for shutter plain glass panes 5milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels exectra., Indian StandardI. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, Polyvinyl chloride gaskets, 250milimetre length aluminium tower bolts, 150milimetre dia. pad handle, exectra. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment exectra.complete (First Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150milimetre x 44.5milimetre x 3.00milimetre thick top rails 47.62 x 44.45milimetre x 3.00milimetre thick, vertical style 47.62 x 44.45milimetre, 3.00milimetre thick and for shutter plain glass panes 5milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels exectra., Indian StandardI. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, Polyvinyl chloride gaskets, 250milimetre length aluminium tower bolts, 150milimetre dia. pad handle, exectra. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment exectra.complete (Second Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75milimetre, 3.18milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150milimetre x 44.5milimetre x 3.00milimetre thick top rails 47.62 x 44.45milimetre x 3.00milimetre thick, vertical style 47.62 x 44.45milimetre, 3.00milimetre thick and for shutter plain glass panes 5milimetre thick for top panels and 12milimetre thick both side laminated phenol bonded particle board panels for bottom panels exectra., Indian StandardI. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, Polyvinyl chloride gaskets, 250milimetre length aluminium tower bolts, 150milimetre dia. pad handle, exectra. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment exectra.complete (Third Floor)

Providing and fixing fiber glass reinforced polyster door shutter 30milimetre thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, exectra complete (Stilt Floor)

Providing and fixing fiber glass reinforced polyster door shutter 30milimetre thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, exectra complete (Ground Floor)

Providing and fixing fiber glass reinforced polyster door shutter 30milimetre thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, exectra complete (First Floor)

Providing and fixing fiber glass reinforced polyster door shutter 30milimetre thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, exectra complete (Second Floor)

Providing and fixing fiber glass reinforced polyster door shutter 30milimetre thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, exectra complete (Third Floor)

Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting exectra (Stilt Floor)

Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting exectra (Ground Floor)

Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting exectra (First Floor)

Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting exectra (Second Floor)

Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting exectra (Third Floor)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete(with guard bars 12milimetre square at 10cm Centre to Centre.) (Stilt Floor)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete(with guard bars 12milimetre square at 10cm Centre to Centre.) (Ground Floor)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete(with guard bars 12milimetre square at 10cm Centre to Centre.) (First Floor)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete(with guard bars 12milimetre square at 10cm Centre to Centre.) (Second Floor)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete(with guard bars 12milimetre square at 10cm Centre to Centre.) (Third Floor)

a) Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122milimetre x 45milimetre, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75milimetre weighing 1.15Kilogramper running metre with shutter sections made of 18milimetre x 40milimetre size having average weight of 0.6Kilogramper running metre(or as required size) with change in proportionate weight, with 6milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one(2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. :: a) Colour anodized (Stilt Floor)

a) Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122milimetre x 45milimetre, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75milimetre weighing 1.15Kilogramper running metre with shutter sections made of 18milimetre x 40milimetre size having average weight of 0.6Kilogramper running metre(or as required size) with change in proportionate weight, with 6milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one(2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. :: a) Colour anodized (Ground Floor)

a) Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122milimetre x 45milimetre, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75milimetre weighing 1.15Kilogramper running metre with shutter sections made of 18milimetre x 40milimetre size having average weight of 0.6Kilogramper running metre(or as required size) with change in proportionate weight, with 6milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one(2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. :: a) Colour anodized (First Floor)

a) Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122milimetre x 45milimetre, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75milimetre weighing 1.15Kilogramper running metre with shutter sections made of 18milimetre x 40milimetre size having average weight of 0.6Kilogramper running metre(or as required size) with change in proportionate weight, with 6milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one(2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. :: a) Colour anodized (Second Floor)

a) Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122milimetre x 45milimetre, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75milimetre weighing 1.15Kilogramper running metre with shutter sections made of 18milimetre x 40milimetre size having average weight of 0.6Kilogramper running metre(or as required size) with change in proportionate weight, with 6milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one(2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. :: a) Colour anodized (Third Floor)

Providing and fixing in position(as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90milimetre at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30milimetre at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30milimetre at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10milimetre at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts exectra, complete. With powder coating with box (Stilt Floor)

Providing and fixing in position(as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90milimetre at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30milimetre at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30milimetre at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10milimetre at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts exectra, complete. With powder coating with box (Ground Floor)

Providing and fixing in position(as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90milimetre at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30milimetre at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30milimetre at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10milimetre at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts exectra, complete. With powder coating with box (First Floor)

Providing and fixing in position(as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90milimetre at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30milimetre at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30milimetre at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10milimetre at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts exectra, complete. With powder coating with box (Second Floor)

Providing and fixing in position(as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90milimetre at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30milimetre at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30milimetre at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10milimetre at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25milimetre at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts exectra, complete. With powder coating with box (Third Floor)

Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38milimetre x 1.22milimetre box type, 5milimetre thick sheet glass louvers, of approved quality exectra. complete. (Stilt Floor)

Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38milimetre x 1.22milimetre box type, 5milimetre thick sheet glass louvers, of approved quality exectra. complete. (Ground Floor)

Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38milimetre x 1.22milimetre box type, 5milimetre thick sheet glass louvers, of approved quality exectra. complete. (First Floor)

Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38milimetre x 1.22milimetre box type, 5milimetre thick sheet glass louvers, of approved quality exectra. complete. (Second Floor)

Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38milimetre x 1.22milimetre box type, 5milimetre thick sheet glass louvers, of approved quality exectra. complete. (Third Floor)

Providing and fixing mild steel grill work for windows, ventilators exectra. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Stilt Floor)

Providing and fixing mild steel grill work for windows, ventilators exectra. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Ground Floor)

Providing and fixing mild steel grill work for windows, ventilators exectra. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (First Floor)

Providing and fixing mild steel grill work for windows, ventilators exectra. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Second Floor)

Providing and fixing mild steel grill work for windows, ventilators exectra. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Third Floor)

Providing and fixing mild steel grill work for windows, ventilators, exectra. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Stilt Floor)

Providing and fixing mild steel grill work for windows, ventilators, exectra. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Ground Floor)

Providing and fixing mild steel grill work for windows, ventilators, exectra. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (First Floor)

Providing and fixing mild steel grill work for windows, ventilators, exectra. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Second Floor)

Providing and fixing mild steel grill work for windows, ventilators, exectra. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Third Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3milimetre minimum size, crossings of Mild Steel flats of size 18 x 5milimetre T or E section for runner of minimum 40 x 6milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6milimetre max. spacing of vertical channels be 100milimetre enclosed gate position and clear space of 150milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting exectra. complete.(Indian Standard 105211983). (Stilt Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3milimetre minimum size, crossings of Mild Steel flats of size 18 x 5milimetre T or E section for runner of minimum 40 x 6milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6milimetre max. spacing of vertical channels be 100milimetre enclosed gate position and clear space of 150milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting exectra. complete.(Indian Standard 105211983). (Ground Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3milimetre minimum size, crossings of Mild Steel flats of size 18 x 5milimetre T or E section for runner of minimum 40 x 6milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6milimetre max. spacing of vertical channels be 100milimetre enclosed gate position and clear space of 150milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting exectra. complete.(Indian Standard 105211983). (First Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3milimetre minimum size, crossings of Mild Steel flats of size 18 x 5milimetre T or E section for runner of minimum 40 x 6milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6milimetre max. spacing of vertical channels be 100milimetre enclosed gate position and clear space of 150milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting exectra. complete.(Indian Standard 105211983). (Second Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3milimetre minimum size, crossings of Mild Steel flats of size 18 x 5milimetre T or E section for runner of minimum 40 x 6milimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6milimetre max. spacing of vertical channels be 100milimetre enclosed gate position and clear space of 150milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting exectra. complete.(Indian Standard 105211983). (Third Floor)

Providing and fixing Indian Standard Institute marked double swing flush door shutters conforming to IS :2202(Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30milimetre thick including Indian Standard Institute marked Stainless Steel L-hinges with necessary screws Fittings & Fixtures per leaf Stainless Steel kick plates on both sides of the door of 300milimetre height Heavy Duty satin finish butt Stainless Steel Hinges(100milimetre x 75milimetre x 3milimetre in size)-4 nos. Stainless Steel finished lever handle with mortise lock-1 number Floor spring-1 number 100milimetre x 100milimetre safety glass at the specified location (Stilt Floor)

Providing and fixing Indian Standard Institute marked double swing flush door shutters conforming to IS :2202(Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30milimetre thick including Indian Standard Institute marked Stainless Steel L-hinges with necessary screws Fittings & Fixtures per leaf Stainless Steel kick plates on both sides of the door of 300milimetre height Heavy Duty satin finish butt Stainless Steel Hinges(100milimetre x 75milimetre x 3milimetre in size)-4 nos. Stainless Steel finished lever handle with mortise lock-1 number Floor spring-1 number 100milimetre x 100milimetre safety glass at the specified location (Ground Floor)

Providing and fixing Indian Standard Institute marked double swing flush door shutters conforming to IS :2202(Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30milimetre thick including Indian Standard Institute marked Stainless Steel L-hinges with necessary screws Fittings & Fixtures per leaf Stainless Steel kick plates on both sides of the door of 300milimetre height Heavy Duty satin finish butt Stainless Steel Hinges(100milimetre x 75milimetre x 3milimetre in size)-4 nos. Stainless Steel finished lever handle with mortise lock-1 number Floor spring-1 number 100milimetre x 100milimetre safety glass at the specified location (First Floor)

Providing and fixing Indian Standard Institute marked double swing flush door shutters conforming to IS :2202(Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30milimetre thick including Indian Standard Institute marked Stainless Steel L-hinges with necessary screws Fittings & Fixtures per leaf Stainless Steel kick plates on both sides of the door of 300milimetre height Heavy Duty satin finish butt Stainless Steel Hinges(100milimetre x 75milimetre x 3milimetre in size)-4 nos. Stainless Steel finished lever handle with mortise lock-1 number Floor spring-1 number 100milimetre x 100milimetre safety glass at the specified location (Second Floor)

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted Ivory vitreous china water Closet including 6 litre capacity Ivory vitreous china flushing Cistern with raised soft-push button, Ivory vitreous china wash basin of size 46 x 36cm and one no Stainless Steel 304 hinged rail 76cms & three no Stainless Steel 304of(Grab Bar) 60cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket exectra complete as per the direction of Engineer-In-charge. (Stilt Floor)

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted Ivory vitreous china water Closet including 6 litre capacity Ivory vitreous china flushing Cistern with raised soft-push button, Ivory vitreous china wash basin of size 46 x 36cm and one no Stainless Steel 304 hinged rail 76cms & three no Stainless Steel 304of(Grab Bar) 60cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket exectra complete as per the direction of Engineer-In-charge. (Ground Floor)

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted Ivory vitreous china water Closet including 6 litre capacity Ivory vitreous china flushing Cistern with raised soft-push button, Ivory vitreous china wash basin of size 46 x 36cm and one no Stainless Steel 304 hinged rail 76cms & three no Stainless Steel 304of(Grab Bar) 60cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket exectra complete as per the direction of Engineer-In-charge. (First Floor)

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted Ivory vitreous china water Closet including 6 litre capacity Ivory vitreous china flushing Cistern with raised soft-push button, Ivory vitreous china wash basin of size 46 x 36cm and one no Stainless Steel 304 hinged rail 76cms & three no Stainless Steel 304of(Grab Bar) 60cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket exectra complete as per the direction of Engineer-In-charge. (Second Floor)

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted Ivory vitreous china water Closet including 6 litre capacity Ivory vitreous china flushing Cistern with raised soft-push button, Ivory vitreous china wash basin of size 46 x 36cm and one no Stainless Steel 304 hinged rail 76cms & three no Stainless Steel 304of(Grab Bar) 60cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket exectra complete as per the direction of Engineer-In-charge. (Third Floor)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50milimetre dia. and vertical pipe of 38milimetre dia at 0.60m Centre to Centre or as required and horizontal pipes of 25milimetre dia in three rows, all pipes of 2milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75milimetre dia above newel post of 75milimetre diameter exectra. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (Stilt Floor)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50milimetre dia. and vertical pipe of 38milimetre dia at 0.60m Centre to Centre or as required and horizontal pipes of 25milimetre dia in three rows, all pipes of 2milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75milimetre dia above newel post of 75milimetre diameter exectra. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (Ground Floor)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50milimetre dia. and vertical pipe of 38milimetre dia at 0.60m Centre to Centre or as required and horizontal pipes of 25milimetre dia in three rows, all pipes of 2milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75milimetre dia above newel post of 75milimetre diameter exectra. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (First Floor)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50milimetre dia. and vertical pipe of 38milimetre dia at 0.60m Centre to Centre or as required and horizontal pipes of 25milimetre dia in three rows, all pipes of 2milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75milimetre dia above newel post of 75milimetre diameter exectra. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (Second Floor)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50milimetre dia. and vertical pipe of 38milimetre dia at 0.60m Centre to Centre or as required and horizontal pipes of 25milimetre dia in three rows, all pipes of 2milimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75milimetre dia above newel post of 75milimetre diameter exectra. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (Third Floor)

Providing fine cement finish 1.5milimetre thick over green plaster surface including scaffolding curing exectra. complete. (Stilt Floor)

Providing and fixing 1st class Ivory glazed earthenware Orissa Type Water Closet Pan 580milimetre dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15milimetre thick, 10 liter Polycinyal Chloride flushing cistern with all necessary pipe connection exectra. complete. (Stilt Floor)

Providing and fixing 1st class Ivory glazed earthenware Orissa Type Water Closet Pan 580milimetre dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15milimetre thick, 10 liter Polycinyal Chloride flushing cistern with all necessary pipe connection exectra. complete. (Ground Floor)

Providing and fixing 1st class Ivory glazed earthenware Orissa Type Water Closet Pan 580milimetre dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15milimetre thick, 10 liter Polycinyal Chloride flushing cistern with all necessary pipe connection exectra. complete. (First Floor)

Providing and fixing 1st class Ivory glazed earthenware Orissa Type Water Closet Pan 580milimetre dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15milimetre thick, 10 liter Polycinyal Chloride flushing cistern with all necessary pipe connection exectra. complete. (Second Floor)

Providing and fixing 1st class Ivory glazed earthenware Orissa Type Water Closet Pan 580milimetre dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15milimetre thick, 10 liter Polycinyal Chloride flushing cistern with all necessary pipe connection exectra. complete. (Third Floor)

Providing and fixing European type wall-hung Ivory water closet of approved make with push valve concealed type with cover plate 32milimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100milimetre dia. Galvanized Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors exectra. complete. (Stilt Floor)

Providing and fixing European type wall-hung Ivory water closet of approved make with push valve concealed type with cover plate 32milimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100milimetre dia. Galvanized Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors exectra. complete. (Ground Floor)

Providing and fixing European type wall-hung Ivory water closet of approved make with push valve concealed type with cover plate 32milimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100milimetre dia. Galvanized Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors exectra. complete. (First Floor)

Providing and fixing European type wall-hung Ivory water closet of approved make with push valve concealed type with cover plate 32milimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100milimetre dia. Galvanized Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors exectra. complete. (Second Floor)

Providing and fixing European type wall-hung Ivory water closet of approved make with push valve concealed type with cover plate 32milimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100milimetre dia. Galvanized Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors exectra. complete. (Third Floor)

Providing and fixing Ivory glazed earthenware lipped flat back/corner type Urinal with Polyvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32milimetre diameter Polycinyal Chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (Stilt Floor)

Providing and fixing Ivory glazed earthenware lipped flat back/corner type Urinal with Polyvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32milimetre diameter Polycinyal Chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (Ground Floor)

Providing and fixing Ivory glazed earthenware lipped flat back/corner type Urinal with Polyvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32milimetre diameter Polycinyal Chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (First Floor)

Providing and fixing Ivory glazed earthenware lipped flat back/corner type Urinal with Polyvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32milimetre diameter Polycinyal Chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (Second Floor)

Providing and fixing Ivory glazed earthenware lipped flat back/corner type Urinal with Polyvinyl chloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32milimetre diameter Polycinyal Chloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. (Third Floor)

Providing and fixing White Glazed Earthenware Squatting plate(Ladies Urinal) with Polycinyal Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetre dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (Stilt Floor)

Providing and fixing White Glazed Earthenware Squatting plate(Ladies Urinal) with Polycinyal Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetre dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (Ground Floor)

Providing and fixing White Glazed Earthenware Squatting plate(Ladies Urinal) with Polycinyal Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetre dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (First Floor)

Providing and fixing White Glazed Earthenware Squatting plate(Ladies Urinal) with Polycinyal Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetre dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (Second Floor)

Providing and fixing Ivory Glazed Earthenware Squatting plate(Ladies Urinal) with Polycinyal Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetre dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (Third Floor)

Providing and fixing coloured Ivory glazed earthenware Wash Hand Basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Polycinyal Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing exectra. complete. (Stilt Floor)

Providing and fixing coloured Ivory glazed earthenware Wash Hand Basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Polycinyal Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing exectra. complete. (Ground Floor)

Providing and fixing coloured Ivory glazed earthenware Wash Hand Basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Polycinyal Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing exectra. complete. (First Floor)

Providing and fixing coloured Ivory glazed earthenware Wash Hand Basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Polycinyal Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing exectra. complete. (Second Floor)

Providing and fixing coloured Ivory glazed earthenware Wash Hand Basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Polycinyal Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing exectra. complete. (Third Floor)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195milimetre size with pillar cock, Chromium PlasperedAngular stop cock, long thread of approved make continental including Stainless Steel bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180milimetre thick fixed on Black Kadappa Framework, exectra. Complete as directed by Engineer in charge. (Stilt Floor)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195milimetre size with pillar cock, Chromium PlasperedAngular stop cock, long thread of approved make continental including Stainless Steel bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180milimetre thick fixed on Black Kadappa Framework, exectra. Complete as directed by Engineer in charge. (Ground Floor)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195milimetre size with pillar cock, Chromium PlasperedAngular stop cock, long thread of approved make continental including Stainless Steel bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180milimetre thick fixed on Black Kadappa Framework, exectra. Complete as directed by Engineer in charge. (First Floor)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195milimetre size with pillar cock, Chromium PlasperedAngular stop cock, long thread of approved make continental including Stainless Steel bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180milimetre thick fixed on Black Kadappa Framework, exectra. Complete as directed by Engineer in charge. (Second Floor)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195milimetre size with pillar cock, Chromium PlasperedAngular stop cock, long thread of approved make continental including Stainless Steel bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180milimetre thick fixed on Black Kadappa Framework, exectra. Complete as directed by Engineer in charge. (Third Floor)

Providing and fixing 15milimetre dia. screw down bib/stop tap of brass including necessary socket union nut complete. (Stilt Floor)

Providing and fixing 15milimetre dia. screw down bib/stop tap of brass including necessary socket union nut complete. (Ground Floor)

Providing and fixing 15milimetre dia. screw down bib/stop tap of brass including necessary socket union nut complete. (First Floor)

Providing and fixing 15milimetre dia. screw down bib/stop tap of brass including necessary socket union nut complete. (Second Floor)

Providing and fixing 15milimetre dia. screw down bib/stop tap of brass including necessary socket union nut complete. (Third Floor)

Providing and fixing screw down 15milimetre dia. wheeled stop tap of brass including necessary sockets/union nut complete (Stilt Floor)

Providing and fixing screw down 15milimetre dia. wheeled stop tap of brass including necessary sockets/union nut complete (Ground Floor)

Providing and fixing screw down 15milimetre dia. wheeled stop tap of brass including necessary sockets/union nut complete (First Floor)

Providing and fixing screw down 15milimetre dia. wheeled stop tap of brass including necessary sockets/union nut complete (Second Floor)

Providing and fixing screw down 15milimetre dia. wheeled stop tap of brass including necessary sockets/union nut complete (Third Floor)

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre dia. nickel plated towel rod exectra. complete. (Stilt Floor)

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre dia. nickel plated towel rod exectra. complete. (Ground Floor)

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre dia. nickel plated towel rod exectra. complete. (First Floor)

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre dia. nickel plated towel rod exectra. complete. (Second Floor)

Providing and fixing 450milimetre x 550milimetre size superior type Belgium mirror with 16milimetre dia. nickel plated towel rod exectra. complete. (Third Floor)

Providing and fixing 10cm Polyvinyl chloride nahani trap with grating exectra. complete. (Stilt Floor)

Providing and fixing 10cm Polyvinyl chloride nahani trap with grating exectra. complete. (Ground Floor)

Providing and fixing 10cm Polyvinyl chloride nahani trap with grating exectra. complete. (First Floor)

Providing and fixing 10cm Polyvinyl chloride nahani trap with grating exectra. complete. (Second Floor)

Providing and fixing 10cm Polyvinyl chloride nahani trap with grating exectra. complete. (Third Floor)

Providing and fixing chromium plated towel rod 16milimetre dia and 75cm. in length including all accessories complete. (Stilt Floor)

Providing and fixing chromium plated towel rod 16milimetre dia and 75cm. in length including all accessories complete. (Ground Floor)

Providing and fixing chromium plated towel rod 16milimetre dia and 75cm. in length including all accessories complete. (First Floor)

Providing and fixing chromium plated towel rod 16milimetre dia and 75cm. in length including all accessories complete. (Second Floor)

Providing and fixing chromium plated towel rod 16milimetre dia and 75cm. in length including all accessories complete. (Third Floor)

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed stone ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140Kilogramwith frame exectra complete. (Stilt Floor)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed stone warepipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140Kilogramwith frame exectra complete. (Stilt Floor)

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Stilt Floor)

Providing and fixing wall mixer with overhead shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings exectra.complete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Stilt Floor)

Providing and fixing wall mixer with overhead shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings exectra.complete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Ground Floor)

Providing and fixing wall mixer with overhead shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings exectra.complete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (First Floor)

Providing and fixing wall mixer with overhead shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings exectra.complete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Second Floor)

Providing and fixing wall mixer with overhead shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings exectra.complete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Third Floor)

Providing and fixing Chromium Plaspered wall mixer with provision for overhead shower with 115milimetre long bend pipe and wall flange of approved make including necessary sockets/union nut exectra. complete. (Stilt Floor)

Providing and fixing Chromium Plaspered wall mixer with provision for overhead shower with 115milimetre long bend pipe and wall flange of approved make including necessary sockets/union nut exectra. complete. (Ground Floor)

Providing and fixing Chromium Plaspered wall mixer with provision for overhead shower with 115milimetre long bend pipe and wall flange of approved make including necessary sockets/union nut exectra. complete. (First Floor)

Providing and fixing Chromium Plaspered wall mixer with provision for overhead shower with 115milimetre long bend pipe and wall flange of approved make including necessary sockets/union nut exectra. complete. (Second Floor)

Providing and fixing Chromium Plaspered wall mixer with provision for overhead shower with 115milimetre long bend pipe and wall flange of approved make including necessary sockets/union nut exectra. complete. (Third Floor)

Providing and fixing on walls/ceiling/floor 15milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and fixing on walls/ceiling/floor 15milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Ground Floor)

Providing and fixing on walls/ceiling/floor 15milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (First Floor)

Providing and fixing on walls/ceiling/floor 15milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Second Floor)

Providing and fixing on walls/ceiling/floor 15milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Third Floor)

Providing and fixing on walls/ceiling/floor 20milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and fixing on walls/ceiling/floor 20milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Ground Floor)

Providing and fixing on walls/ceiling/floor 20milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (First Floor)

Providing and fixing on walls/ceiling/floor 20milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Second Floor)

Providing and fixing on walls/ceiling/floor 20milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Third Floor)

Providing and fixing on walls/ceiling/floor 25milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and fixing on walls/ceiling/floor 25milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Ground Floor)

Providing and fixing on walls/ceiling/floor 25milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (First Floor)

Providing and fixing on walls/ceiling/floor 25milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Second Floor)

Providing and fixing on walls/ceiling/floor 25milimetre dia. CPolyvinyl chloride pipe with necessary fittings, remaking good the demolished portion exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Third Floor)

Providing and laying in trenches 15milimetre dai. CPolyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches exectra. complete Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and laying in trenches 20milimetre dai. CPolyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and laying in trenches 25milimetre dai. CPolyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing and laying for 150milimetre dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing(including excavation and refilling the trenches) complete. (Stilt Floor)

Providing and laying concrete pipes of Indian StandardNP. class of 300milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Stilt Floor)

Providing and laying concrete pipes of Indian StandardNP. class of 225milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Stilt Floor)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing exectra. complete. (Stilt Floor)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing exectra. complete. (Stilt Floor)

Providing, constructing and fixing 250milimetre dia. Inspection chamber made up of UPolyvinyl chloride material of thickness 3.5milimetre and height of 259milimetre with inlet and outlet of 110milimetre dia. with 75milimetre dia. U Trap, Ultra shaft pipe of Upvc material having height of 470milimetre and fixing Ultra 250milimetre dia. UPolyvinyl chloride cover and frame in 150milimetre thick in c.c.1:2:4, having crushed sand bed of 100milimetre thick of size 550milimetre dia. Including excavation and refilling the sides of chamber by crushed sand cushioning 150milimetre thickness, connecting all required UPolyvinyl chloride fittings with rubber lubricant exectra. complete. (Stilt Floor)

Providing, constructing and fixing 450milimetre dia. Inspection chamber made up of Polypropylene/polyethylene material of thickness 3.5milimetre and height of 388milimetre with 160 or 200milimetre main inlet(s) outlet and 110 and/or 160milimetre branch inlets, with 450milimetre dia. Ultra shaft pipe of HDPE material having height of 460milimetre, having Reinforced Cement Concrete cover and frame fixing in 150milimetre thick in c.c.1:2:4, having crushed sand bed of 150milimetre thick of size 750milimetre dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150milimetre thickness, connecting all required UPolyvinyl chloride fittings with rubber lubricant exectra. complete. (Stilt Floor)

Providing, constructing and fixing 600milimetre dia. Inspection chamber made up of Polypropylene/polyethylene material Having 315milimetre diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160milimetre and 200milimetre pipes having thickness of 5milimetre and 600milimetre in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5milimetre having Reinforced Cement Concrete cover and frame fixing in 150milimetre thick in c.c.1:2:4, having crushed sand bed of 150milimetre thick of size 750milimetre dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150milimetre thickness, connecting all required UPolyvinyl chloride fittings with rubber lubricant exectra.complete. (Stilt Floor)

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20, 000 litres (Stilt Floor)

Providing and fixing 75milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete (Stilt Floor)

Providing and fixing 75milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete (Ground Floor)

Providing and fixing 75milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete (First Floor)

Providing and fixing 75milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete (Second Floor)

Providing and fixing 75milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete (Third Floor)

Providing, laying and fixing Polycinyal Chloride pipe of 110milimetre. dia. with fittings such as bends, tees, reducers, clamps, exectra. including necessary excavation, trench filling exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Stilt Floor)

Providing, laying and fixing Polycinyal Chloride pipe of 110milimetre. dia. with fittings such as bends, tees, reducers, clamps, exectra. including necessary excavation, trench filling exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Ground Floor)

Providing, laying and fixing Polycinyal Chloride pipe of 110milimetre. dia. with fittings such as bends, tees, reducers, clamps, exectra. including necessary excavation, trench filling exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (First Floor)

Providing, laying and fixing Polycinyal Chloride pipe of 110milimetre. dia. with fittings such as bends, tees, reducers, clamps, exectra. including necessary excavation, trench filling exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Second Floor)

Providing, laying and fixing Polycinyal Chloride pipe of 110milimetre. dia. with fittings such as bends, tees, reducers, clamps, exectra. including necessary excavation, trench filling exectra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed exectra. complete. (Third Floor)

Providing and fixing 100milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete. (Stilt Floor)

Providing and fixing 100milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete. (Ground Floor)

Providing and fixing 100milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete. (First Floor)

Providing and fixing 100milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete. (Second Floor)

Providing and fixing 100milimetre dia stabiliser pipe/Polycinyal Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps exectra. complete. (Third Floor)

Providing and fixing Polycinyal Chloride Rain water pipes of 160milimetre outer diameter and having wall thickness of 2.2 to 2.7milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polycinyal Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polycinyal Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge exectra. complete. (Stilt Floor)

Providing and fixing Polycinyal Chloride Rain water pipes of 160milimetre outer diameter and having wall thickness of 2.2 to 2.7milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polycinyal Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polycinyal Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge exectra. complete. (Ground Floor)

Providing and fixing Polycinyal Chloride Rain water pipes of 160milimetre outer diameter and having wall thickness of 2.2 to 2.7milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polycinyal Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polycinyal Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge exectra. complete. (First Floor)

Providing and fixing Polycinyal Chloride Rain water pipes of 160milimetre outer diameter and having wall thickness of 2.2 to 2.7milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polycinyal Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polycinyal Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge exectra. complete. (Second Floor)

Providing and fixing Polycinyal Chloride Rain water pipes of 160milimetre outer diameter and having wall thickness of 2.2 to 2.7milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polycinyal Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polycinyal Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge exectra. complete. (Third Floor)

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. (Stilt Floor)

Supplying Mild Steel Angle iron post of size 50milimetre x 50milimetre x 5milimetre duly painted with one coat of red oxide paint and two coats of synthetic enamel finish paint having black and Ivory bands of 25cm width including 2 nos of Galvanized Iron bolt and nut of size 10milimetre dia. And 20milimetre long including transportation exectra. complete. Spec. No. : As per IRC-67, and M.O.R.T. and H. Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994 (Stilt Floor)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, exectra complete. (Stilt Floor)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, exectra complete. (Ground Floor)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, exectra complete. (First Floor)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, exectra complete. (Second Floor)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, exectra complete. (Third Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) exectra. complete. (Stilt Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) exectra. complete. (Ground Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) exectra. complete. (First Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) exectra. complete. (Second Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) exectra. complete. (Third Floor)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required exectra. complete. (Stilt Floor)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required exectra. complete. (Ground Floor)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required exectra. complete. (First Floor)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required exectra. complete. (Second Floor)

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required exectra. complete. (Third Floor)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)exectra. complete. (Stilt Floor)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)exectra. complete. (Ground Floor)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)exectra. complete. (First Floor)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)exectra. complete. (Second Floor)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)exectra. complete. (Third Floor)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, exectra. complete. (Stilt Floor)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, exectra. complete. (Ground Floor)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, exectra. complete. (First Floor)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, exectra. complete. (Second Floor)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, exectra. complete. (Third Floor)

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index(SRI) 108(with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus exectra, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-incharge. (Second Floor)

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index(SRI) 108(with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus exectra, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-incharge. (Third Floor)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150milimetre in thickness. (Stilt Floor)

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. (Stilt Floor)

Providing and fixing self supporting steel roofing system for a Godown or alike made up of structural grade steel sheet of 912 millimeter width(tolerance +/-2 millimeter), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 28.75 meter having arch rise as 5.75 meter, arch length 33.92 meter. The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 1.40 millimeter(tolerace +/-0.02 millimeter) with alloy coating AZ 150 and paint coating of regular modified polyster, top coat 25 micron and bottom coat 12 micron as perapproved colour, including fixing hangers, clamps exectra.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2' x 14' and turbo ventilator of 24'' diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning exectra. complete. (Stilt Floor)

Providing and fixing corrugated galvanised iron sheets of 0.63milimetre thick(24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing exectra. complete.(Weight of 5.5 Kilogram/sq.m.). (Stilt Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees exectra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces exectra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade exectra. complete. (Stilt Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees exectra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces exectra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade exectra. complete. (Ground Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees exectra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces exectra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade exectra. complete. (First Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees exectra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces exectra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade exectra. complete. (Second Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees exectra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces exectra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade exectra. complete. (Third Floor)

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50milimetre x 40milimetre weighing 0.39 Kilogram/m. at 60cms Centre to Centre and fixed with(15 x 15milimetre) flanges weighing 0.119 Kilogram/m suspended on 6milimetre dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50milimetre x 40milimetre weighing 0.39 Kilogram/m exectra. including all labour exectra. complete. (Stilt Floor)

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50milimetre x 40milimetre weighing 0.39 Kilogram/m. at 60cms Centre to Centre and fixed with(15 x 15milimetre) flanges weighing 0.119 Kilogram/m suspended on 6milimetre dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50milimetre x 40milimetre weighing 0.39 Kilogram/m exectra. including all labour exectra. complete. (Ground Floor)

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50milimetre x 40milimetre weighing 0.39 Kilogram/m. at 60cms Centre to Centre and fixed with(15 x 15milimetre) flanges weighing 0.119 Kilogram/m suspended on 6milimetre dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50milimetre x 40milimetre weighing 0.39 Kilogram/m exectra. including all labour exectra. complete. (First Floor)

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50milimetre x 40milimetre weighing 0.39 Kilogram/m. at 60cms Centre to Centre and fixed with(15 x 15milimetre) flanges weighing 0.119 Kilogram/m suspended on 6milimetre dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50milimetre x 40milimetre weighing 0.39 Kilogram/m exectra. including all labour exectra. complete. (Second Floor)

Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50milimetre x 40milimetre weighing 0.39 Kilogram/m. at 60cms Centre to Centre and fixed with(15 x 15milimetre) flanges weighing 0.119 Kilogram/m suspended on 6milimetre dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50milimetre x 40milimetre weighing 0.39 Kilogram/m exectra. including all labour exectra. complete. (Third Floor)

Providing and fixing false ceiling of 10 to 12milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards exectra. complete.(excluding frame work, runners and mild steel suspenders). (Stilt Floor)

Providing and fixing false ceiling of 10 to 12milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards exectra. complete.(excluding frame work, runners and mild steel suspenders). (Ground Floor)

Providing and fixing false ceiling of 10 to 12milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards exectra. complete.(excluding frame work, runners and mild steel suspenders). (First Floor)

Providing and fixing false ceiling of 10 to 12milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards exectra. complete.(excluding frame work, runners and mild steel suspenders). (Second Floor)

Providing and fixing false ceiling of 10 to 12milimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards exectra. complete.(excluding frame work, runners and mild steel suspenders). (Third Floor)

Boring/drilling bore well of 300milimetre dia for casing/strainer pipe, by suitable method prescribed in IS: 2800(part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. (Stilt Floor)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized Polyvinyl chloride medium well-casing pipe of 150milimetre dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories exectra. all complete, for all depths, as per the direction of Engineer in charge. (Stilt Floor)

Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25milimetre dia. 1.2milimetre thick with multiple points head 1.2 mt. long(Heavy Duty) welded or clamped to Galvanized Iron pipe pole B grade 50milimetre diaof requiired length with Mild Steel round bnase plate 25 Cm diam and 10milimetre thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45cm diam x 45cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40Kilogramcharcoal and salt with altemate layers of charcoal and salt and Galvanized Ironpipe 40milimetre dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note-Copper strip fropm lightening conductor is not considered in this item. (Stilt Floor)

Supply, fixing and installation of 4milimetre thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50milimetre thick, total thickness of aluminium composite panels not to be less than 4milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50milimetre X25milimetre X 3milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900milimetre X 1200milimetre and fixed to the building structure as per design through 50milimetre X50milimetre X5milimetre MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Stilt Floor)

Supply, fixing and installation of 4milimetre thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50milimetre thick, total thickness of aluminium composite panels not to be less than 4milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50milimetre X25milimetre X 3milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900milimetre X 1200milimetre and fixed to the building structure as per design through 50milimetre X50milimetre X5milimetre MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Ground Floor)

Supply, fixing and installation of 4milimetre thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50milimetre thick, total thickness of aluminium composite panels not to be less than 4milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50milimetre X25milimetre X 3milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900milimetre X 1200milimetre and fixed to the building structure as per design through 50milimetre X50milimetre X5milimetre MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (First Floor)

Supply, fixing and installation of 4milimetre thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50milimetre thick, total thickness of aluminium composite panels not to be less than 4milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50milimetre X25milimetre X 3milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900milimetre X 1200milimetre and fixed to the building structure as per design through 50milimetre X50milimetre X5milimetre MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Second Floor)

Supply, fixing and installation of 4milimetre thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50milimetre thick, total thickness of aluminium composite panels not to be less than 4milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50milimetre X25milimetre X 3milimetre thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900milimetre X 1200milimetre and fixed to the building structure as per design through 50milimetre X50milimetre X5milimetre MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Third Floor)

Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate exectra. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230milimetre/25milimetre including scaffolding, fixing of screw, exectra.(As directed by Engineer in Charge) (Stilt Floor)

Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate exectra. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230milimetre/25milimetre including scaffolding, fixing of screw, exectra.(As directed by Engineer in Charge) (Ground Floor)

Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate exectra. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230milimetre/25milimetre including scaffolding, fixing of screw, exectra.(As directed by Engineer in Charge) (First Floor)

Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate exectra. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230milimetre/25milimetre including scaffolding, fixing of screw, exectra.(As directed by Engineer in Charge) (Second Floor)

Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate exectra. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230milimetre/25milimetre including scaffolding, fixing of screw, exectra.(As directed by Engineer in Charge) (Third Floor)

Providing and fixing sky light in Reinforced Cement Concrete roof including frame made of Mild Steel angle 50 x 50 x 6milimetre with hold fast, sheet glass 12milimetre thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting exectra. complete. (Stilt Floor)

Providing and fixing sky light in Reinforced Cement Concrete roof including frame made of Mild Steel angle 50 x 50 x 6milimetre with hold fast, sheet glass 12milimetre thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting exectra. complete. (Ground Floor)

Providing and fixing sky light in Reinforced Cement Concrete roof including frame made of Mild Steel angle 50 x 50 x 6milimetre with hold fast, sheet glass 12milimetre thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting exectra. complete. (First Floor)

Providing and fixing sky light in Reinforced Cement Concrete roof including frame made of Mild Steel angle 50 x 50 x 6milimetre with hold fast, sheet glass 12milimetre thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting exectra. complete. (Second Floor)

Providing and fixing sky light in Reinforced Cement Concrete roof including frame made of Mild Steel angle 50 x 50 x 6milimetre with hold fast, sheet glass 12milimetre thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting exectra. complete. (Third Floor)

Providing and fixing 90cm x 60cm Granite plate engraving 10cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete (Stilt Floor)

Painting letters upto 20cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint exectra. complete. (Stilt Floor)

RWH-Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300milimetre thick side filling around outside of RCC rings(annular space) with 40milimetre size boulders including filling of percolation pit up to 0.5m depth(from bottom up) with 25-75milimetre clean washed gravels followed by 0.5m depth of 10-25milimetre of clean washed stones followed by 0.5m of washed river fine aggregate(natural sand/crushed sand vertically shaft Impactor grade finely washed exectra.) including netlon mesh between each gravel/fine aggregate(natural sand/crushed sand vertically shaft Impactor grade finely washed exectra.) media layer including covering with RCC slab, manhole frame & cover, Polyvinyl chloride rungs exectra. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge (Stilt Floor)

RWH-Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated Polyvinyl chloride casing pipe wrapped around with netlon mesh including 300milimetre thick sidefilling around outside of RCC rings(annular space) with 40milimetre size boulders including filling of recharge pit up to 0.5m depth with 25-75milimetre clean washed gravels from bottom up followed by 0.5m depth of 10-25milimetre of clean washed stones followed by 0.5m of washed river fine aggregate(natural sand/crushed sand vertically shaft Impactor grade finely washed exectra.) including netlon mesh between each gravel/fine aggregate(natural sand/crushed sand vertically shaft Impactor grade finely washed exectra.) media layer including covering with RCC slab, manhole frame & cover, Polyvinyl chloride rungs, Polyvinyl chloride end-caps, fittings exectra. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. (Stilt Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programinable logincal control with Supervisory control and Data Acquilistion enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) exectra. complete. With fine aggregate(Crushed sand vertically shaft Impactor Grade) (Stilt Floor)

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (Stilt Floor)

Providing second class Burnt Brick masonry with conventional/Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding exectra. Complete (Stilt Floor)

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days exectra. complete. (Stilt Floor)

Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle(50 x 50x 6milimetre) post at 2.5m Centre to Centre including excavation of pits of foundation concrete fixing the posts in(1:4:8) cement concrete block of 45x45x45cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting exectra.complete (Stilt Floor)

Providing and fixing 50milimetre. dia. medium class Galvanized Ironpipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer exectra. complete. (Stilt Floor)

Providing and fixing mild steel grill gate with angle iron frame 65milimetre x 65milimetre x 10milimetre with iron bars at 150milimetre C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (Stilt Floor)

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Stilt Floor)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I(Using Screening Type A(13.2)milimetre Aggregate) (Stilt Floor)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means-Grading II(Using Screening Type B(11.2milimetre) Aggregate) (Stilt Floor)

Providing and constructing 75milimetre. thick Modified Penetration Macadam(MPM) road surface including all materials, preparing the existing road surface, spreading 40milimetre. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12milimetre.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 exectra. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) (Stilt Floor)

Open Graded Premix Surfacing-Providing and Laying OGC 20milimetre thickness composed of 13.2milimetre to 5.6milimetre aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime/tack and Seal coat. For Bitumen of specified grade -- USING drum mix type hot mix plant with Supervisory control and Data Acquilistion, Paver and Vibratory roller(Over MPM Surface)(VG-30 bulk bitumen rates are considered to arrive at rates) (Stilt Floor)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. exectra. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) (Stilt Floor)

Supplying hard murum/kankar at the road site, including conveying and stacking complete. (Stilt Floor)

Spreading hard murum/soft murrum/gravel or kankar for side width complete (Stilt Floor)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering exectra. complete. (Stilt Floor)

Supplying Mild Steel Angle iron post of size 65milimetre x 65milimetre x 6milimetre duly painted with one coat of red oxide paint and two coats of synthetic enamel finish paint having black and Ivory bands of 25cm width including 2 nos of Galvanized Iron bolt and nut of size 10milimetre dia. And 20milimetre long including transportation exectra. complete. Spec. No. : As per IRC-67, and M.O.R.T. and H. Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994 (Stilt Floor)

Providing and fixing solid core flush door shutter comilimetreercial in single leaf 32milimetre thick without ventilator comilimetreercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. (Stilt Floor)

Providing and laying Rough Shahabad Stone Flooring 25milimetre to 30milimetre thick and of required width in plain/diamond pattern on a bed of 1:6 Cement Mortor including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning exectra. complete. (Stilt Floor)

Sub Work No -1 Providing Internal Electrification to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of one hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 rotection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. Cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Telephone System Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW (

Supplying & erecting 10 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 100 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 extension complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.

Networking Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring 20 Ports+4G Combo, Managed Layer 2, POE Switch erected in provided rack complete.

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/ GBS

Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 17U floor mount rack (Dimension-DxWxH – 800x600x954mm) as per specification No. WG-NAS/RAK

Supplying and fixing dual-band manageable wireless 3x3 Mesh Router, high performance, 802.11 n/ac unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2

Providing Supplying, & fixing of EPSON make 3LCD Projector with 3300 Imns , HDMI USB . VGA Ports . Bright high-quality images with easy to use XGA model featuring 3LCD technology Resolution 1024x768, Contrast Ratio 15000: 1 Throw Ratio 1.44- 1.95:1 Video Color, modes: Blackboard, Cinema, Dynamic. Presentation, sRGB 2 Watt inbuilt loudspeaker, Weight 2.4kg. Colour reproduction upto 1.07 billion colours Aspect ratio 4:3 (Rates are as per Sanct.letter No:- 1685/ 2022 /Dated:-29.06.2022 )(Rate sanctioned By SE Pune for Proposed 100 Beded MCH Wing at GMC Miraj, Civil Hospital, Sangli estimate)

Providing supplying. & fixting of Motorized 4 x 6 mat finish screen with 2 "black border ,Seamless compund milti-layers diffuse reflection fabric . Tabular Motor with smooth & quiter operation (Rates are as per Sanct.letter No:- 1685/ 2022 /Dated:-29.06.2022 )(Rate sanctioned By SE Pune for Proposed 100 Beded MCH Wing at GMC Miraj, Civil Hospital, Sangli estimate)

Proving Supplying & Fixing of celling mount kit Heavy Quality, adjustable with -/+ 15' Tilting. 2 feet x 2 feet to fit EPSON make 3LCD Projector with adjustable Bracket (Rates are as per Sanct.letter No:- 1685/ 2022 /Dated:-29.06.2022 )(Rate sanctioned By SE Pune for Proposed 100 Beded MCH Wing at GMC Miraj, Civil Hospital, Sangli estimate)

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR ( VWDC Court)

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC( VWDC Court)

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC( VWDC Court)

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC( VWDC Court)

Supplying, installation, testing and commissioning extendable/non-extendable indoor type 11 kV, 630A, load break switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no SWHTS / LBS ( 1 no for Court Bldg. + 1 no for Res. Staff Qtrs)

Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 2 way Indoor/outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 1 no. feeder with 1 LBS and 1 no. feeder with 1 VCB compliant to IEC 62271 -100,2 00 and 102, as per specification no. SWHTS/ RMU SCADA

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

Supplying and erecting 75 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( Transformer to MLTP 2 Runs - of 25 mtr +DG to MLTP 2 Run of 50mtr + MLTP to Dist. Panel 2 Runs of 150 mtrs.)

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. Cover complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying, installing, testing & commissioning 3 phase,11/0.433 kV, 50 Hz., 250 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not Exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions ,with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100% load as per IS:1180 (part 1) : 2014, with necessary permissions of Electrical Inspector, as per specification no SS- TRNSL.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

SITC of Main Panel,The panel shall be comprising of following & IEC 61439, Panel should be fully compartmentallised, wall mounted with M.S. Channel dully painted, fabricated of 14/16swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 400 Amp FP MCCB. DG I/O 400 Amp FP MCCB. Bus bar chamber TPN & E with aluminium bars 400A Outgoing-400A FP MCCB- 2 N0s. 200A FP MCCB - 7 Nos. 100A FP MCCB - 3 Nos. 63A FP MCB C series - 4Nos. 32A FP MCB C series - 2 Nos. (RA Sheet Attached)

SITC of DISTRIBUTION Floor Panel,The panel shall be comprising of following & IEC 61439, Panel should be fully compartmentallised, wall mounted with M.S. Channel dully painted, fabricated of 14/16swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 400 Amp FP MCCB. Bus bar chamber TPN & E with aluminium bars Outgoing- 200A FP MCCB- 6 N0s. 100A FP MCCB- 3 N0s. . (RA Sheet Attached)

SITC of Floor Panel,The panel shall be comprising of following & IEC 61439, Panel should be fully compartmentallised, wall mounted with M.S. Channel dully painted, fabricated of 14/16swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing- 100A TP MCCB- 6 N0s. 63A FP MCB C series -4 Nos. 32A FP MCB C series - 3 Nos. (RA Sheet Attached)

Area Lighting Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. X 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting integrated LED street light fitting 48 W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. ‘B’ class G.I. pipe of required length complete as per specification no. FG-BKT/SLB

Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( Street Light Panel Foundation frame)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting G.I. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/ HM (excluding luminaries)

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (St Light Panel + Koisik+ Transformer + LBS + RMU)

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Pump Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame

Supplying, fixing and commissioning MCB type change over switch 4 pole, 63A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (Pump)

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete (St Light Panel - 5 Kg + Pump - 5 kg + DG Panel - 5 kg)

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP (1W - 1 S)

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

Sub Work No-3 Providing Fire Fighting, Fire Alarm System to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. (Sub Work 1 to 7) Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height framemade out of 30x30x4 mm angle iron with cross supports forlegs, welded with 4 hooks and duly painted with one coat ofred lead and two coats of silver paint complete.

Pumps Supplying, installation, testing and commissioning of main fire pump (MFP /EP) suitable for water discharge of 2280 to 2850LPM at 80 to 60 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/ SSC/ DP

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Pipe Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Internal & External Hydrent Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FFFFA/NZ

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FFFA/FMC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200) mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Sprinkler Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FFSPR.

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

SITC of Sprinkler Flexible drop pipes with 1500mm long(UL Listed) made of Corrugated SS Tubing to with stand 16 Bar pressure with welded reducer on one end to directly accommodate sprinkler & female check-nut on the other end to connect to the branch pipe with supports complete

SITC of self Luminous Exit Sign in accordance with BS5499as per sample approved by incharge (FIRE EXIT 300mm X 150mm)

FAS Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity,interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300μA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/ SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Sub Work No-4 Providing AC System for Proposed Court Building to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type room air conditioning unit 2.5TR to 2.7TR capacity with refrigerant R32 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/WAC

Supplying, installing, testing & commissioning split type room air conditioning unit 2.8TR to 3.2TR capacity with refrigerant R32 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying 16 amp. 3 pin plug Top bakelite type of 230 V. A.C. supply.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting blanking plate of suitable size on MCBDB

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( For AC OD Frame-)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. X 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

SUB- WORK - NO-5 Providing passenger MR Lift Works for Proposed Court Building to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. Part - A : EI Work Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Part -B : Lift Work SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with • Rated capacity :- 20 Passenger/1360Kg • Floors :-G+3 floor (4 Stops/4 Landings) • Travel :- 12.6 mtrs • Location of Lift Machine:- MR • Rated speed :- 1.0mps VS • Car/Landing door clear opening of 1100mm wide x 2000 mm high • Clear Car size of 2000mm wide x 1500mm deep x 2250mm high • Lift shaft available having clear size of 2100mm wide x 3000mm deep, 1800mm Pit depth, 4150 mm Overhead. • Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) Add On A. For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, 5. For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. B. For Full Collective control system, add as below. 1- For Lift travelling above First floor & up to Sixth floor QTY DESCRIPTION RATE TOTAL 1 17.1.10 Lift For G+1 1934721 1934721 1 Note A-5 2&3 Floor 150580 301160 1 Note B1 Collective 27340 27340 Total Rs 2263221

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with • Rated capacity :- 20 Passenger/1360Kg • Floors :-Stilt+ G+3 floor (5 Stops/5 Landings) • Travel :- 16.05 mtrs • Location of Lift Machine:- MR • Rated speed :- 1.0mps VS • Car/Landing door clear opening of 1100mm wide x 2000 mm high • Clear Car size of2000mm wide x 1500mm deep x 2250mm high • Lift shaft available having clear size of 2100mm wide x 3000mm deep, 1800mm Pit depth, 4150 mm Overhead. • Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) Add On A. For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, 5. For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. B. For Full Collective control system, add as below. 1- For Lift travelling above First floor & up to Sixth floor QTY DESCRIPTION RATE TOTAL 1 17.1.10 Lift For G+1 1934721 1934721 1 Note A2 1,2&3 Floor 150580 451740 1 Note B1 Collective 27340 27340 Total Rs 2413801

SITC of Electric Traction Passenger Lift with • Rated capacity :- 6 Passenger/408Kg • Floors :- Stilt +G+3 floor (5 Stops/5 Landings) • Travel :-16.05 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Car/Landing door clear opening of 800 mm wide x 2000mm high • Clear Car size of 1000mm wide x 1100mm deep x 2250mm high • Lift shaft available having clear size of 1970mm wide x 1800mm deep, 1800mm Pit depth, 4150mm Overhead. • Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Add On A. For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, 5. For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. B. For Full Collective control system, add as below. 1- For Lift travelling above First floor & up to Sixth floor

Sub Work No-6 Providing DG Set Work to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. DG Set Works Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP ( DG Set Neutral)

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (for DG Set control Cabeling)

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included)(DG Set Foundation 5m x 2.5m x 0.8m)

Sub Work No-7 Providing CCTV System to Proposed Court Building (Stilt + Ground Floor + 3 Floors) ( 15 Court Halls) at Barshi, Tal - Barshi Dist - Solapur. Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting HMS PVC conduit FRLS grade 40 mm dia. With PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 mm) as per specification No. WG-NAS/RAK

Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of three hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( Battery Stand & Camera Misc work)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, Maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specifications CCTV-HDD ( 7 nos for Storage & 2 Nos for VWDC Court)

Supplying & erecting 32" professional LED Monitor with 1920 *1080 ( Full HD) Display, and following features Brightness: Minimum 250 Cd/m2, Contrast Ratio: Minimum 1000:1, Viewing angle: 178/178 deg., Response time: Maximum 8 ms, Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications ( 5 nos for - CCTV-Monitor + 2 nos for VWDC Court)

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor: Minimum 1 / 2.8" Progressive Scan CMOS, Video Resolution: Minimum 1920 x 1080, Video Compression: H.264, H.265 or higher, at least Three individually configurable stream, Frame rate: Minimum 25fps at all resolutions, WDR: minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, Minimum IR distance: 50m, Lens Type: 2.8/4/6 mm Lens, fixed focal, Field of View: 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°, 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°, 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°, Lux sensitivity- Minimum 0.2 Lux at color, Minimum 0.05 Lux at Black & White, 0.0 Lx (IR) Night Vision Distance Minimum IR- 50m. Camera minimum Adjustment Angles - Pan: 350°, Tilt; 72°, Rotate:350°. Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. built in micro SD/SDHC/SDXC card slot of Minimum 128 GB, built in microphone. Minimum Input/Output- Audio in × 1, Audio Out × 1 , Alarm in× 1, Alarm Out × 1. Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events: Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( 0 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol-DHCP,UDP, HTTP, HTTPS, NTP,DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP),Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ ceiling/ false ceiling/ provided pole (mounting height not more than 5 meter) etc. with all accessories etc. complete as per specifications CCTV

Supplying & erecting of High definition 2 Megapixel IP IR Dome Camera with following features Image Sensor: Minimum 1/ 2.8" Progressive Scan CMOS, Video Resolution: Minimum 1920 x 1080 Video Compression: H.264, H.265 or higher, at least Three individually configurable stream, Frame rate: Minimum 25fps at all resolutions, Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. WDR: minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, Minimum IR distance: 30m, Lens Type: 2.8/4/6 mm Lens, fixed focal, Field of View: 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity- Minimum 0.2 Lux at color, Minimum 0.05 Lux at Black & White, 0.0 Lx (IR) Night Vision Distance Minimum IR- 30m. Camera minimum Adjustment Angles - Pan: 350°, Tilt; 72°, Rotate:350°. Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. built in micro SD/SDHC/SDXC card slot of Minimum 128 GB, built in microphone. Minimum Input/Output- Audio in × 1, Audio Out × 1 , Alarm in× 1, Alarm Out × 1. Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events: Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( 0 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol-DHCP,UDP, HTTP, HTTPS, NTP,DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP),Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ ceiling/ false ceiling/ provided pole (mounting height not more than 5 meter) etc. with all accessories etc. complete as per specifications CCTV

Supplying & erecting of High definition 2 Megapixel IP IR PTZ Camera with following features Image Sensor: Minimum 1/ 2.8" Progressive Scan CMOS, Video Compression: Support H.265/H.264, Three individually configurable stream, Frame Rate: Minimum 30fps all resolutions, WDR: minimum 120 dB Wide Dynamic Range, ONVIF profile conformant. Auto Tracking, Pre-set Tour Settings, Pan: 360° endless, Tilt: From -15° to 90° (auto-flip 180°) , Minimum Pan Speed - from 0.1°/s to 160°/s, Minimum Preset Speed: 240°/s, Minimum Tilt Speed- from 0.1°/s to 120°/s, Minimum Preset Speed: 200°/s, Min Presets- 250, Alarm Input-2-ch alarm input, Alarm Out put-1-ch alarm output, Audio-1 channel input & output, Minimum IR distance :100M, Lens Type: minimum 4.3-125mm Lens min 16x digital zoom, min 30x optical Zoom, Focus Mode:-Auto/Zooming/One Push Manual, Lux sensitivity- Minimum 0.2 Lux at color, Minimum 0.05 Lux at Black & White, 0.0 Lx (IR), Night Vision Distance Minimum IR- 100m, support 12/24 VDC, 24 VAC & PoE, IP67/IP66, IK10, built in micro SD/SDHC/SDXC card slot, minimum 256 GB, built in microphone. Minimum Input/Output- Audio in × 1, Audio Out × 1 , Alarm in× 1, Alarm Out × 1. Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events: Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( 0 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol-DHCP,UDP, HTTP, HTTPS, NTP,DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP),Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ ceiling/ false ceiling/ provided pole (mounting height not more than 5 meter) etc. with all accessories etc. complete as per specifications CCTV ( 2 Nos for Outside & 1 No for VWDC Court)

Supplying, installing, testing & commissioning of 32/40 Ch Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, Upto 5 Megapixel Resolution, with HDMI/VGA outputs, HDMI output of 4K resolution or VGA output with output upto 1920 × 1080. Support H.265, MJPEG duel codec Decoding, Incoming Bandwidth 250Mbps with Minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 8TB, Minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-adaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specifications CCTV-NVR

OMKAR CONSTRUCTION