REPAIR TO ROAD BERMS AND ROAD FURNITURE AT MIL STN NABHA AND SANGRUR UNDER GE(S) PATIALA

Amount

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, complete all as specified and directed by Engr-in-charge.

Removing excavated material (soils & sludge) exc 50m but not exc 250m and deposited at a level not exc 1.50m high from base, complete all as specified and directed

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, laid bedded and pointed in any mortar complete all as specified and directed.

M & L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in foundation for post holes complete all as specified and directed by Engr-in-charge.

Continuous brick road edging using sub class 'B' bricks with width equal to width of brick laid dry on end vertically include for embedding bricks in the ground to depths indicated and tamping ground around bricks and including necessary excavation in soft / loose soil also for removing any surplus spoil to a distance n exc 50 mtrs, complete all as specified and directed. Note : Bricks to be used as retrieved from Item no 3.00 above.

Bricks, old size sub class 'B' laid dry on edge, on and including 25mm thick layer of sand and filling the joints with sand, complete all as specified and directed. Note : Bricks to be used as retrieved from Item no 3.00 above.

Demolition of cement concrete un-reinforced in ground floors and pavings n exec 150 cm thick (above or below ground level) and removal from site complete all as specified and directed.

M&L for Factory made rubber moulded pre-cast cement concrete type B1 1 : 2: 4 (20mm graded aggregate) in kerb stone with plain fair faces, including chamfers, weathering throating etc and setting in cement mortar 1:4 complete with joints to match including necessary excavation embedding in the ground to depth indicated and tamping ground around and also for removing any surplus spoil to a distance n exc 50 mtrs complete all as specified.

M & L 75 mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundation, mass filling or sub base of foors complete all as specified and directed by Engr-in-charge.

M &L for Rubber moulded Machine pressed precast concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and directed.

Preparation of new surfaces of any description i.e wood, steel, iron, concrete, brick, stone, etc exceeding 10 cm width or girth and applying two coats of black bituminous paint, complete all as specified and directed.

M & L for 2.5mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces by using automatic mechanical road painting machine, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Road sign board of made out with two nos post using stainless steel (SS) pipe 50mm dia 2.40mtr high with stainless steel (SS) flat of size 40 x 6 mm duly fixed with ACP sheet 1200x 950x 5mm thick laminated with radium paper including writing /sign with radium tape roll/paper both side of border incl all nesessary drilling bolting or riveting welding etc fixed, compete all as specified and direcetd by Engineer - in charge

S&F in repair Solar stud of three LED of colour red/ yellow on one side (Total 6 Nos) housed in a tough pressure die/casted Alluminium ally of size 125mm x125mm of height 25mm with build in stress nail 65mm long for fixing Epoxy, LED solar cell , battery and light sensor well protected in side under tough unbreakable poly carbonate transparent sheet, workable for 3-4 Days (night) after full charge in 5 -6 hours, compete all as specified and directed by Engineer - in charge

S&F in repair solar delinators (1000 x 47mm) made of polycarbonate and toughened alluminium alloy body with the following specification (i) HT=145mm, diametre= 80mm, (ii) 4 super bright LEDs which give 360 degree veiwing, solar pannel 2.5 V , 120mm (Appx), 1.25 volt rechargeable battery 01 Nos, complete all as specified and directed.

m/s k.k. construction co.

NARINDER KUMAR SONS

M/s Pawan Kumar Goyal

VIKAS INFRASTRUCTURE

rkkataria and sons

FAVOURITE ENGINEERS

RUPINDER SINGH SODHI

Arneja Builders