Repair to Bridge over Local Nallah on Tangabilla to Bakala Goili Road_Road_Repair to Bridge such as minor repairs to railing, deck slabs etc and painting along with repair of Bridge approaches 1.200 to 1.800

Clearing grass & removal of rubbish on both sides of the road to facilitate widening berms , disposal of stuff including all labours , T&P article as per specification for road & bridge work.

Providing granular sub-base using gravel including laying , speading in uniform layers including watering & compacting etc complete.

Providing and compacting IRC WBM Gr-III layer usingI size of metal (53 mm to 22.4 mm size hard granite metal) & rolling with PRR

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 OF MORD

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat of either Type -A or Type -B or type -C per technical specification clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

Wall painting 2 coats with plastic enamel paint of approved shade + with one coat of Priming to bridges with scafolding above 4.6 mtr One Coat with any approved primer on new work to give an even shade including cost of paint.

Supplying and fixing 15cm dia 1.00m long guard posts of RCCM-15 using 7.5 Kg of steel for each guard post with 20mm size H.G (c.B) chips including cost of all reinforcement and materials centering shuttering and watering carrying etc, complete.