electrification work against sanctioned Package No. 34_2022-23 under Deposit Head in the area of EUDD-IV, Aligarh

Amount

Safe carriage of following 11 Mtrs. long S.T.Pole from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the repective ends.

Safe carriage of line material viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & other material from store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends.

Erection & grouting of 11 Mtrs. ST double pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc.

Erection and grouting of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual.

Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work.

After dismentling of 250 KVA /400 KVA Distribution Transformer from old site, safe carriage to the respective site of work including loading & unloading at the respective ends and mounting/placement on double pole/plinth including proper jumpering from 11 KV line to the transformer and also connecting the LT site cables as per RESSPO Manual.

Neutral & body earthing of Distribution Transformer by digging of pit upto water level depth (approx. 125 feet) and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Construction of plinth at various 11/0.4 KV Sub-station suitable for distribution transformer having size 5’x 5’ x 5’ out which 2’ below the ground. Work will include digging of foundation 2’ deep & brick work with Ist class bricks having cement and sand mortar of ratio 1:6 on all the walls, each of 9” thickness. The area inside the wall shall be duly filled by mud up to the height of appropriate level from ground level and shall be duly watered & rammed. Above the filling C.C. of ration 1:6:12 (Cement sand and brick ballast) giving 4” layer shall be provided. Above C.C. layer RCC layer having 4” thickness and with ratio 1:2:4 of cement sand and stone ballast shall be provided Re-enforcement shall be provided by providing net of (8 Nos. + 8 Nos.) M.S. rods of size 10 mm dia and each of 5’ length in the middle of the top of C.C. layer. The plinth shall be plastered with 12mm thick plaster in ratio 1:4 at all sides. This work will include cost of labour, T&P and all material required for construction of plinth which shall be provided by the contractor as per RESSPO Norms.

Providing and fixing of welded wire mesh fencing around transformer plinth with M.S. Angle of size 35X35X6 mm. length and 1.20 Meters height, such panels shall be supported on M.S. Angle from of size 40X40X6 mm. having 04 Nos. corner supports of height 1.65 Meters including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc. for locking the arrangement as per drawing and specifications the fencing will be painted one coat of red oxide primer and then two coats of bus green synthetic enamel paint. The rates should be inclusive of all materials required for proper completion of above work (length of each fencing approx. 11 Meters)

Fabrication of Top Channel as per RESSPO Norms.

Fabrication of Dropper Channel as per RESSPO Norms.

Fabrication of F Braket s per RESSPO Norms.

Fabrication of Cross Bracing Anlge s per RESSPO Norms.

Dismantling of old & used other Iron scrap form existing line and its safe carriage from site to store as per RESSPO Norms.

Dismantling of old & used Damge Rail Pole form existing line and its safe carriage from site to store as per RESSPO Norms.

Safe carriage of LT KV XLPE Cable 3.5x400 Sq.mm. from store sarsol to pit site including loading & unloading at the repective ends.

Safe carriage of 11 KV XLPE Cable 3x185 Sq.mm. from store sarsol to pit site including loading & unloading at the repective ends.

Digging of Trench by Excavation of earth, laying of bricks to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cable upto sizes 185 sq.mm. including cost of Bricks, sand, clamps ete for laying of cable in Double curcuit (Pakka Road)

Supply & Erection of HDPE Pipe (upto 160 mm. dia)/ GI Pipe (upto 8" dia) Over-head (Overhead structure like flyover etc) for laying of 11 KV XLPE Cables of suitable size (upto size 185 sq.mm.) in HDPE Pipes/ GI Pipes.

Laying of 11 KV XPLE Cable of suitable size (upto 185 Sq.mm.) in HDPE Pipes/ GI Pipes

Road Restoration Charges (Pakka Road)

P K ENTERPRISES

MS M.R.G.ENTERPRISES