Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L3₹11.8 L+₹92,603.97 (5.59%)Accepted-AOC GOVT CONTRACTOR VILL NAYA SUJAN FEROZPUR KALAN TEH DIST PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L3 | Accepted-AOC lowest | |
| 2 | L1₹16.6 LRejected-AOC | L1 | Rejected-AOC not found lowest | |
| 3 | L2₹16.8 L+₹28,437.54 (1.72%)Rejected-AOC 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L2 | Rejected-AOC not found lowest | |
| 4 | L4₹24.0 L+₹7.5 L (45.2%)Rejected-AOC NH 44 BUILDING COLONY NO 01 SUJANPUR TEH DISTT PATHANKOT PUNJAB 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹27.5 L+₹10.9 L (66.1%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹36,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Offg GE
GE Basoli PO lakhanpur Distt Kathua JK
CERATIN REPAIR TO OTM AND MD ACCN IN NORTH ZONE AT MADHOPUR UNDER GE BASOLI
2022_MES_557307_1
GE/BAS-56/2022-23
Open Tender
Civil Works
Item Rate
120 days
Madhopur area under GE Basoli
class E catd E (i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹36,000
11 Jan 2023
12 Oct 2022
11 Nov 2022
12 Oct 2022
9 Nov 2022
26 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in in ground floors and paving any thickness (below or aB13:B61bove ground level) complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed..
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed..
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm. complete all as specified and directed.
Taking down shutters and refixing in same opening of any description exc 1.0sqm and n.exc 2.0 sqm. complete all as specified and directed.
S&F factory made pressed steel frames size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S&F Factory made pressed steel frames size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M&L PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) as in backfill of pressed steel frame complete all as specified and directed..
S&F 35mm thick plain framed factory made paneled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed.
S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube complete all as specified and directed..
S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed.
M&L for prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work. complete all as specified and directed.
Steel window factory made double shutter and tubular moulded frame of 16 mm gauge sutable for double shutter as per drg no. CEPZ/TD/245/01 Sheet 1/1 and CEPZ /TD/246/01 Sheet 1/2 ( double for masquito proof one glazed with glazing bars and one gauged without glazing bars) with side hung shutters incl projecting type hinges non friction with 3.00 mm thick 100 mm long handle and two nos tower bolts 100 mm long welded on 3.00 mm thick MS plate to each window shutter and incl top hung vent shutter at top of glazed and wire gauge shutter welded incl hold fast including Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; ailings; framework of water tanks and similar work conforming to Fe.410-0, FE-310-0 complete all as specified and directed.
S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane complete all as specified and directed.
-ditto-' all as per above but figured pin headed glass complete all as specified and directed.
M&L Galvanized mild steel wire cloth 0.48 mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinted touch or galvanized wire staples complete all as specified and directed.
M&L preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer complete all as specified and directed..
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm complete all as specified and directed.
M&L Hasp and staple, safety type, aluminum anodised with mold steel hinge pin including bolt to hing plate and fixed with screw of 75mm size complete all as specified and directed.
S&F 100mm long butt hinges extruded aluminum alloy anodised and fixed complete all as specified and directed.
S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised.
S&F 150mm long aluminum tower bolts (ISI Marked) stove enameled black complete all as specified and directed..
S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
S&F aluminum alloy ,anodized sliding door bolts with hasp,staple ( bolt type)and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long complete all as specified and directed.
S&F aluminum hat pegs, solid body, 125mm to 175mm complete all as specified and directed..
S&F aluminum wardrobe hooks (single) 50 to 60mm complete all as specified and directed..
S&F Harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc. complete all as specified and directed.
M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc two coats of cement base paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc two coats of distempering walls distemper dry, white or tinted on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement as in ceiling incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement complete all as specified and directed.
M&L vitrified Ceramic colored tiles 9 to 10 mm th (Square/rectangular) polishied,area of each tiles not exc 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and finished even and fair and including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbished off the premises complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and finished even and fair and including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including chamfering, rounding, moulding, hole for gas pipe and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
M&L Framed work such as Rafters Purlins, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed
M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed..
M&L Preparing new surfaces, plastered or unplastered of walll/facia/chajjas etc and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls.
M&L preparing old plastered or unplastered surfaces of wall/facia/chajjas etc. and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls complete all as specified and directed..
M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 including Demolition of brickwork built in cement mortar complete all as specified.
M&L Raking out joints/Pointing in cement mortar 1:3 to brick tiles laid flat as in roof including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound(WPC shall be measured and paid separately) complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.25 Kg/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen of grade 85/25 @ 0.7 Kg/Sqm over the APP complete all as specified and directed..
M&L Plain cement concrete padding 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) of uniform thickness 40mm, padding shall be furnished even and smooth w/o using extra cement, all as specified and directed
M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B1 complete all as specified and directed.
S & F in position suspended false ceiling system using E-grid suspended ceiling grid system of M/S Saint Gobain.The size of grid shall be 600 X 600mm with GI frame work main runner 38 X 24 cross tee 25 X 24 mm and wall angle 24mm X 24mm using 8 mm th ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 part-I 1996 fixed in the grid of E grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butterfly clips including Demolition of wall and ceiling board (fibre,pulp,insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed..
Dismantling of timber scantling (un framed) 40 Sq cm and over in section in any postion complete all as specified
S & F Door seal with rubber brush equal to the lenght of door complete all as specified and directed.
M & L for machine pressed precast interlocking paver block any shape and size conforming to IS-15654-2006 of 60mm thickness M-35 grade with grey cement and pigment over 50 mm thick sand filling under floors including watering and consolidated including 75 mm thick cement concrete type D-2 1:4:8(40mm graded agg) as in sub base,finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.
Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter of size 50x40x1.30 mm and glass pane not less than 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including suitable aluminium handle, tower bolt hinges and aluminium grill not less than 6 mm dia fixed with frame complete all as specified and directed.
Supply and fix for natural colour anodised Aluminum Door shutters side hung type with safe bars locking rails locking arrangements and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle etc with and including sheet glass fitted type glazing quality of 4mm thick size of lock rails 44.45x81.50mm side rails 85.85x44.45mm top rail 83.5x44.45mm bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete all as specified and directed in MES SSR 2010. Part-I
Repair/ Replacement of Rolling shutter Ball bearing , Bearing Shaft incl ell Accessories of rolling shutter complete all as specified and as directed
Material and labour for Running welding in repairs not exceeding 2.5cm in length, thickness of metal to be welded n.exc 6mm complete all as specified and directed.
S & F Viterous china wash basin white,flat back size 550 X 400 mm including brackets including cutting for pinning ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete including 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe fixed in repair complete all as specified complete all as specified and directed..
Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed.
S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm complete all as specified and directed.
Stop valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed.
S&F Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm and fixed in repairs, complete all as specified and directed..
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixed in repairs, complete all as specified and directed..
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed..
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed..
S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and directed.
S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 100mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed..
S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed..
S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor, 100mm dia, sand cast pipes complete all as specified and directed..
-ditto- but 75mm dia complete all as specified and directed..
S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed..
-ditto- but 75mm dia complete all as specified and directed..
S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 dia complete all as specified and directed.
S&F cast iron trap 'P' or 'S' 100 mm complete all as specified and directed.
S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed..
S&F salt glazed stone ware gully traps, square or round mouthed, type 'P' of size 150 x 150 mm complete all as specified and directed.
Dismantling water tank any type of capacity exceeding 250 litres but not exceeding 500 ltrs complete all as specified and directed..
S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltr complete all as specified and directed.
Dismantling water tank any type of capacity exceeding 500 litres but not exceeding 1000 ltrs complete all as specified and directed..
S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including Dismantling water tank any type of capacity exceeding 500 litres but not exceeding 1000 ltrs complete all as specified and directed as in SSR Part I
S&F in repair Vitreous China urinals, bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F in repair PVC grating 100mm square/round of PTMT complete all as specified and directed.
Taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm complete all as specified and directed.
S&F PVC(SWR) bends any radius of bore 110 mm complete all as specified and directed.
S&F in Brass knobs 35-40mm dia complete all as specified and directed
S & F drawer rooler channel with wheel complete all as specified and directed
S&F in repair peg set of Six mild steel complete all as specified and directed
S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm complete all as specified and directed
S & F Magnetic catcher for cupboard complete all as specified and directed
M&L for Durastone / Endura heavy duty vitrified tiles of size 300mm x 300mm x 8 to 9 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and 15mm thick cement screed bed or bedding layer in CM 1:4 including 75mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.
M&L for water proofing treatment in sunken portion and applying water proofing treatment on horizontal or vertical surfaces by applying bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membarane weighing not less than 3.6 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membarane over sunken portion after cleaning the surfaces by removing dust, dirt etc., as per manufacturers instructions including 15mm thick plaster in CM 1:4 and complete all as specified and directed
M&L PCC 1:5:10, Type E2 (using 40 mm graded brick bats) in filling of sunken portion complete all as specified and directed
M&L PCC type B-0, 1:2:4 using 12.5mm graded stone aggregates 25mm thick as subbase complete all as specified and directed
M&L cement concrete type B-1 1:2:4 (using 20mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed
S&F for 50mm dia GI Medium grade Pipe in sunken portion with all fitting and fixed complete as spouts including cutting hole and making good the same complete all as specified and directed
S & F in repair wash down water closet (Pedestal pattern)white with P or S trap including flush pipe of polythelyene of low or high density of PVC 32 mm dia for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe etc complete all as pecified and directed
M&L Machine cut kota slab fooring 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing, and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed
M&L Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed
R K Builders
BALKRISHAN GUPTA AND SONS
HARI OM ENTERPRISES
Ms Dalip Kumar and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .