Internal Periodical services of OTM Accn (Zone-C) in the AOR of AGE B/R-I under GE (A) Suratgarh at Suratgarh Mil Stn.

Amount

Notes:- (i) 50 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) Suffficient tradesman, Labours needs should be employed by the bidder on daily basis and as required by Engineer-in-Charge. (ix) Main Items and fixtures, base materials shall be from the same manufacturer. (x) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.

M&L for preparing existing treatment of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified

M&L for preparing of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not other wise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge

M&L for preparation of old decorated surfaces of wall and applying 1st quality acrylic distemper (ready mixed) having low VOC content, of approved manufacturer, of required shade and colour using hand roller complete all as specified & directed by Engineer-in-Charge. (Brand : Tractor Emulsion (Asian Paint), Easy Clean (Berger Paint), Promise Inerior (Dulux Akzonobel), Nerolac paints or equivalent brand of Make as specified in Appendix 'B'.)

M&L for complete removal of existing treatment from old plastered surfaces of wall, using mechanical grinding machine and washing of old surface with water of wall, preparation of surfaces including filling of cracks and applying two coat of 1st quality acrylic distemper (ready mixed) having low VOC content, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete to achieve desired smoothness and eveness complete all as specified & directed by Engineer-in-Charge. (Brand : Tractor Emulsion (Asian Paint), Easy Clean (Berger Paint), Promise Inerior (Dulux Akzonobel), Nerolac paints or equivalent brand of Make as specified in Appendix 'B'.)

M&L for 2 mm thick layer of Acrylic wall care putty finished even and smooth surface complete all as specified .

M&L for complete removal of existing treatment from old plastered surfaces of wall, using mechanical grinding machine and washing of old surface with water of wall, preparation of surfaces including filling of cracks and aplying one coat of 100% premium Acrylic emulsion paint by using roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including one coat of primer applied @ 0.9 litre / 10sqm as per manufacturer instruction complete all as specified & directed by Engineer-in-Charge. (Brand :- Apex Ultima (Asian Paint), Weather Coat ( Berger Paint ), Excel No Dust ( Nerolac) or equivalent brand of Make specified in Appendix 'B'.

M&L preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 1.5 mm acrylic wall care putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed by Engr -in - charge.

M&L for preperation of newly plastered or unplastered surfaces of wall and applying and applying three coat of white wash complete all as specified.

M&L Preparation of new ceiling surfaces plastered or unplastered and applying three coat of white wash complete all as specified and directed by Engr -in - charge.

M&L for preparation of newly plastered surface of walls & Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint havingV OC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed by Engineer-in-charge. (Brand :- Apex Ultima (Asian Paint), Weather Coat ( Berger Paint ), Excel No Dust ( Nerolac) or equivalent brand of Make specified in Appendix 'B'.

M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer- in-Charge.

Taking down cement plaster from brick walls/ ceiling or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified

M&L for plastering 15 mm thick in cement plaster 1:6 on surface other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr -in - charge.

M&L for plastering 10 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement all as specified.

M&L plastering 15 mm thick in cement plaster 1:4 on fair face of brickwork or stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed by Engr -in - charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

S&F sheet glass of 3mm,ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane,complete all as specified.

NOTES FOR SER ITEM NO 01 TO 13 OF BOQ : (a) The work pertaining to periodical services shall be executed by contractor as per MOU from authorised applicator through manufacturer of which the materials i.e Exterior Emulsion Paint, Distemper, Putty etc after approved by the GE. (b) The Contractor shall submit the documents “Memoradum of Understanding” (MoU) before starting the subject work with atleast one of the manufacturers mentioned in the contract documents. (c) Cost of scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures as per site requirement shall be included in the quoted rate. (d) Removing of nails, making good holes, cracks etc as per site requirement. (e) Work in patches and in narrow/ widths, bands, cornices, plasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc drops and splashes of paint to be cleared to the entire satisfaction of Engineer-in-Charge. (h) Removing and existing furniture for painting work and replacing the same post painting work, movable cupboard, chicks, blinds etc. (j) Sample patch of 10 sqm be prepared considering all the items of periodicals and shall be got approved from GE prior to carrying out further subject work.

NOTES FOR SER ITEM NO 01 TO 13 OF BOQ (Contd). (k) GUARANTEE OF PERIODICAL SERVICES : Periodical services against respective item of BOQ using mechanized equipment’s only executed under this contract are under the guarantee of contractor for 05 (Five) Years after the certified physical completion of work. Contractor is fully liable under this guarantee to rectify and redo all defective work intimated to him during this period including all type of materials and labour to the specifications catered for in the contract. In case contractor fails to rectify the defective work, Accepting Officer shall get the rectification done as necessary at the risk and cost of contractor and recover the cost in full from the contractor. If the contractor consider that any additional treatment is required over and above that specified here in before in Schedule ‘A’, the same shall be carried out by the contractor without any extra cost to the Government.

PAREEK AND COMPANY (BID ID -3318328)

M/S Shree Ram Enterprises (BID ID -3326012)

SHIVA BUILDERS (BID ID -3325842)

PACHAR BUILDERS (BID ID -3318529)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3318363)

MSR INFRATECH (BID ID -3319043)

SHILPI CONSTRUCTION COMPANY (BID ID -3318821)

POOJA CONSTRUCTION COMPANY (BID ID -3318657)