TD-559/26

Schedule-3 Summary

Tender Inviting Authority: Superintending Engineer, Electricity Transmission Design Circle, 10th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning etc. for Construction of LILO of 220 KV Obra-Rewa Road Ckt-I at 220 KV Sarswati Hightech city line on ACSR Zebra conductor (approx. 26 route Kms) of UPPTCL, on Turn-key basis

Tender No: TD-559/26

Bidder Name & Address :

SCHEDULE OF QUANTITIES AND PRICES

1 Total Price for Supply [Schedule S-1 ]

2 Total Price for Work [Schedule S-2 ]

3 Total Price [S-1+S-2]

Total Bid Price including GST [3+4]

Date: Signature

Name & Address of Company

SCHEDULE S-1 : (SUPPLY OF MATERIAL)

Tender Specification No.: TD-559/26 Name of Firm:

S N Item Unit Qty Ex-Work per unit rate (Rs.) Freight (Rs.) P&F (Rs.) INS (Rs.) Unit FOR Destination rate (5+6+7+8)(Rs) Total Amt (Exclusive of GST) (Rs.)

a Fabrication, galvanizing, Inspection and supply of DC towers including stubs, extension and stub-setting templates, gantry structures as per drawings & BOM

(i) Mild steel MT 978.98

(ii) High Tensile Steel MT 417.25

b Hot dip galvanized, Hexagon round hexagon head transmission tower Bolts Nuts and washers for above structures as per BOM MT 61.7

2 TOWER ACCESSORIES

(a) Number Plate Nos. 97

(b) Danger Plate Nos. 97

(c) Phase Plate in sets of red, blue and yellow for Tension towers Nos. 97

(d) Bird Guard for towers Nos. 20

(e) Circuit pl;ates (set of 2) Nos. 97

f Anti Climbing Device Nos. 97

GST@18%(mailto:GST@18%25塹ᴻ䡿ⲯ嶂藄挧ꮥ) Pipe type earthing material for towers Nos. 87

3 Porcelain Disc Insulators

(a) 70 KN Nos. 11484

4 HARDWARES SUITABLE FOR ACSR Zebra

(a) Single suspension fittings Nos. 106

(b) Single Tension fittings Nos. 450

(c) Double suspension fittings Nos. 30

(d) Double Tension fittings Nos. 166

e SS Pilot fitting Nos. 462

5 CONDUCTOR ACCESSORIES SUITABLE FOR ACSR Zebra

(a) Vibration Dampers Nos. 1450

(b) Mid Span compression Joint Nos. 20

(c) Repair sleeves Nos. 20

(d) Performed Armour Rod Nos. 200

(a) 48 Fibre (DWSM) OPGW Fibre Optic Cable route km 26

(b) Supply & Installation of Hardware set for 48 Fibre (DWSM) OPGW* route km 26

(c) Joint box (48 Fibre) Nos. 22

* GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%.

Date: Bidder Name:

Name & Address of Company

* One set of installation hardware set shall contain all installation hardware fittings& accessories as may be required for 1 km of OPGW/Fibre Optic Approach Cable

* GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%.

Date: Bidder Name:

Name & Address of Company

SCHEDULE-S-2 (Erection work)

Tender Specification No.: TD-559/26 Name of Bidder(Firm):

SN DESCRIPTION UNIT Qty. Unit Rate Amount Ecxclusive of GST (Rs.)

1(i) Survey including preparation of schedule of materials, marking of locations (Route length),GPS Survey of line with co-ordinates of each tower(The length of line shall be authenticated by GPS Survey) Km 26

1(ii) Check survey Km 26

1(iii) Soil testing Locs. 97

2 Cost of excavation of 220 KV tower foundation pits including all earth work,backfilling, levelling etc. Cu.m. 30481.14

3 Setting of stubs including all foundation work but excluding the cost of concerting and excavation (Rate per location) for following towers :

i 220 KV DA Nos. 20

ii 220 KV DB Nos. 22

iii 220 KV DC Nos. 31

iv 220 KV MA mosse Nos. 3

v 220 KV MB mosse Nos. 2

vi 220 KV MC mosse Nos. 7

vii 220 KV MD mosse Nos. 12

4 Cost of concreting for all types of tower foundation including cost of cement,dewatering,shoring and shuttering,forming,curing but excluding cost of reinforcement bars

i 1:2:4 concreting Cu .m. 2646.394

ii 1:1.5:3 concreting Cu .m. 2459.94

iii 1:3:6/PCC Cu .m. 414.62

5 Erection of Superstructure of 220KV SC/DC/MC Towers and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger, number, phase plates, bird guard,anticlimbing device and fixing & punching for 220KV SC/DC/MC lines MT 1457.96

6 Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200seperatiion of minimum 10 mm thickness with 10mm/12 mm electrode & application of Zinc rich Aluminium paint on the affected surface including cost of all material including tack welding of River Crossing tower & Anchor towers. per bolt 10000

7 Laying, stringing, tensioning clamping, jointing etc of ACSR ‘Zebra’ conductor including hoisting of insulators , fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all Six phases of 220 KV DC lines per route Km 21.5

8 Laying, stringing, tensioning clamping, jointing etc of ACSR ‘Zebra’ conductor including hoisting of insulators , fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all TWELVE phases of 220 KV MC lines per route Km 4.5

9 Laying, stringing, tensioning, clamping, jointing,including fittings of all necessary Hardware and accessories of OPGW & OFAC, termaination at S/s,installation of FODP, end to end connectivity & testing etc on 220 KV lines per route Km 26

10 (a) Grounding work including earth work etc for pipe type grounding including cost of coke & salt. Nos 87

11 Installation of steel reinforcement bars in R.C.C. foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc. MT 266.27

12 Dismantiling of old existing earthwire with all accessories including re-rolling of dismantled earthwire on empty drums for reuse and shifting of all material from site to UPPTCL store. per route Km 4.5

13 Dismantling of old existing All 3 Phases of ACSR Zebra Conductor with all accessories and including re-rolling of dismantled conductor on empty drums for reuse and shifting of all material from site to UPPTCL store. per route Km 4.5

14 Dismantling of old existing Tower with all accessories including shifting of all material from site to UPPTCL store. MT 82.7

Date: Bidder Name:

Name & Address of Company