REPAIR TO JOINNERY, ROOFING, WATER PROOFING AND MISC B/R WORKS AT AREA-II UNDER AGE B/R-II AT GE KAMPTEE.

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet(AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as per manufacturer instructions.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt as specified

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

S&F PVC insulation panels 5 to 6mm thick plain PVC sheet suitably placed in false ceiling grid in multiple layers made of Aluminium/G.I./M.S. as per specification and drawing.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

S&F in repairs PVC wall lining consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site with necessary L&T PVC beading on PVC/GI frame as per specifications and drawing, complete including GI frame complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 22 here-in-above but half brick wall in CM 1:4.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications.

Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting all as specified and directed.

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A, complete all as specified and directed by Engg-in-Charge.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 1.59mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm long SS butt hinges and fixed with screw/welded to frames etc all as specified and as directed by EIC

Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed

Supply & fixing 125 mm Aluminium pressed handles fixed complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M&L aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

Built in steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing.

S & F in repair 100 mm long SS butt hinges and fixed with screw/welded to frames etc all as specified and as directed by EIC

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

S & F 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 250 & n exc 500 litres

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 500 & n exc 1000 litres

M & L Gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

M & L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

S&F stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

M&L Stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe

Dismantling boarding, any description, fixed in any position with Screw ,complete all as specified and directed.

S& F in repair 18 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified all as directed.

S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet self,etc complete all as specified and as directed .

S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed.

S&F magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed.

M&L for Rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Welding to existing steel door/gate, window in repairs n.exc 2.5 cm in length thickness of meteal exce 6mm but n.exc 9mm.

Welding to existing steel window in repairs exc 2.5 cm in length but n.exc 5 cm in length thicknes of metal exce 6mm but n.exc 9mm.

S&F in repair 20 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 20mm-210g complete all as specified and directed. Make : Prayag

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 28,035.00]

M/s M.G. Hargunani

M/s Rahul Traders

AK CONSTRUCTION

Bidder Name

M/s B S Jain

M/s Rahul Traders

M/s M.G. Hargunani

AK CONSTRUCTION