Karnataka

Financial Eval

Works

Buildings

Construction of a staff residential building on top of Metagudda Hospital, a primary health center in Metagudda village, Mudhol taluk, Bagalkot district

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹8.2 LCloses: 8 Dec 2025Closed

Timeline

Published28 Nov 2025
Closed8 Dec 2025
Financial Evaluation—
Award—

Bids

1 Bid8 Dec 2025

#	Company	Amount	Status
1	SIDDANNA BADAGI WORKS CONTRACTOR ₹6.3 Laccepted-finance	₹6.3 L	accepted-finance

Tender Value

₹8.2 L

EMD Value

₹20,589

Closing Date

8 Dec 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EEPREDBGK

Office Number

Mobile Number

Work Description

Construction of a staff residential building on top of Metagudda Hospital, a primary health center in Metagudda village, Mudhol taluk, Bagalkot district

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT20735

Reference Number

RDPR/2025-26/BD/WORK_INDENT20735

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate

RequiredTenderer must have of value 2020-21, 2021-22, 2022-23 2023-24, & 2024-25 satisfactorily completed as a prime contractor at least one Similar nature of work/Const of Building work of 50PERCENT of the Amount Put to Tender Percent of not less than Rs.4.11 lakhs issued by the officer not below the rank of Executive Engineer For Similer nature/Building works work done certificate with works shoud be produced Workdone with indent No

RequiredWork orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2020-21 to 2024-25 years period achieved in at least two financial years an average financial turnover of Rs.8.23 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredAccurate postal address and phone / cell phone number

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B

RequiredContractor should submit / upload the difference amount as per the CSR 2024 25 in FDR

RequiredSite Inspection Photo and Certificate from Aee PRE Sub Div MUDHOL

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The cost of the Tender form shall not be refundable.

Unique Document Identification Number (UDIN) from Practicing Chartered Account Must Preferred

Work shall be executed as per KTPP Act & KW-1&2 Conditions.

The Rates Quoted In The Estimates Are Exclusive of GST Taxes.

The GST will be Paid Separately to the Contractors as per the Guidelines of the Government Time to Time.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22 2022-23 2023-24 & 2024-25 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) (in all classes of civil engineering construction works only)

The Tenderer shall obtain similar the workdone certificate Construction of Similer nature Works within the financial years of 2020-21 to 2024-25 (50% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

This work is Randomized as OTHERS Category. Hence any Category of Contractor can bid.

Tenderers must have valid PRED/PWD registration CLASS-3 AND ABOVE and must submit PRED/PWD registration copy.

Single Tender Will Not Be Accepted

NOTE : ONLY RELEVANT SCANNED COPY OF THE ORIGINAL DOCUMENT TO BE ATTACHED FOR THE CORRESPONDING CONDITIONS MENTIONED.

Period for completion of work is 3 Months

The Project Completion period is 3 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Tenderer must submit copies of documents according to KW-1&2 document

Lot No:11262 Sl No 01 Others

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,589

Important Dates

Last Activity

8 Dec 2025

Published

28 Nov 2025

Download Ends

6 Dec 2025

BOQ Preview

•

Construction of a staff residential building on top of Metagudda Hospital, a primary health center in Metagudda village, Mudhol taluk, Bagalkot district

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Ela...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification....

•

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Lettering with black Japan paint of approved brand and manufacture to givean even shade including preparing the surface after thoroughly cleaning thesurface to remove all dirt, dust and foreign matter...

•

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The condui...

•

Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plas...

•

Supplying and fixing PVC metal conduit Deep junction box 25 mm deep Junction box (Page No 03 INo 1.5.2 )

•

Supplying And Fixing Metal Fan Box with Round Hook.(Page No 04 INo 1.13 )

•

Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming t...

•

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module (Page No 09 INo 3.6.4 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch(Page No 09 INo 3.6.9 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936/16A Universal Socket (Page No 09 INo 3.6.10 )

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.(Page No 09 INo 3.8 )

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80 /90mm (Page No 09 INo 3.10.2 )

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws 110 mm (Page No 09 INo 3.10.3 )

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A SP Switch (Page No 10 INo 3.14.10 )

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-20735.docx

Tender Document • 1.84 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SIDDANNA BADAGI WORKS CONTRACTOR

₹6.3 Laccepted-finance