Repair to roof flooring plastering and joinery to OTM and Md Accn of MES Colony under GE Army Dhar Road

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl necessary scafolding are required up to 3 stories bldgs, mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

Supply only liquid water proofing compound. Make as per Appx 'E' to Particular Specification.

M&L for two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L for two coats of cement base paint on newly plastered surfaces of wall over a coat of alkali resistant primer including preparation complete all as specified and as directed.

Preparing new plaster surfaces of walls applying two coats of white wash complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint on roof boarder, drops, fins, chajja / roof facia,column,wall etc, complete all as specified

M&L for applying two coat of white wash on old plastered/unplaster surface of ceiling etc complete all as specified.

Preparing old decorated wall surfaces applying two coats of white wash on wall complete all as specified.

M&L for preparing old decoreted plastered surfaces of walls applying one coats of OBD of approved tint complete all as specified.

M&L two coats of synthetic enamel paint over a coat of red oxide including preparation of new/untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described

M&L for Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint, all as specified.

M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description, over 10 cms in width or girth not otherwise described

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint, all as specified.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

Ditto all as item No 03 above but fixing only

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

Ditto all as item No 05 but fixing only

S&F in repair Bib taps,long body, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair Angle valves fancy type, chromium plated, cast copper alloy, with long shank and cup screwed for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

S&F in repair Stop valves fancy type, chromium plated for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

S&F in repair pillar tap, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair Shelf of Corner glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wight 300 grms)complete all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long .

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20 mm dia, all as specified and directed

S&F in repair Brass chromium plated shower rose with arm 200 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.

S&F in repair Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580mm x 440mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed.

S&F in repair PVC (Plastic polymer Cistern) valve less,Top button, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.

S&F in repair vitreous china urinals, half stall type (420 x 395 x 635mm), complete incl providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with CP waste coupling all as specified and approved by Enger-in-Charge.Make Cera,Parryware, ESSCO.

S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.

S&F in repair Wash hand basins, Vitreous China ( flat back, size 550X400mm , coloured) , excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper,chain and plug, PVC 32mm dia flush pipe and all accessories fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

Dismantling of cast iron or PVC pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

-'ditto all as per ser item No 38 above but laid in trench or in floor

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

-'ditto all as per ser item No above but laid in trench or in floor

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F PVC (SWR) vent cowl of 110mm bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling wooden plugs with chromium plated brass screws, complete all as specified and directed. Make: Prayag Cat Part No 554 or equivalent in Make as per Appx 'E' to Particular Specification.

S&F for towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaquar Cat Part No.ACN 1111SM or equivalent in Make as per Appx `E' to Particular specification.

S&F for towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified. Make: Jaquar Cat Part No. ACN 1121N or equivalent in Make as per Appx `E' to Particular specification.

S&F for wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed. Make: ESS cat part No EC-10 or Make as per Appx 'E' to Particular Specification.

S&F for CP brass centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified. Make : ESS cat Part No T-118 or Make as per Appx 'E' to Particular Specification.

S&F for sink mixter with regular spout wall mountated with connectings legs & wall flanges and including all necessary fittings Make ESS ESS Cat Part No -EC-12 or Make as per Appx 'E' to Particular Specification.

S&F in repair sinks with drainage board made of stainless steel sheet not less than 0.80mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe incl sink coupling, 40mm waste fitting, overall size 915x460mm with bowl size 410x 330x 160mm, etc complete all as specified and as directed. Make Nirali or Make as per Appx 'E' to Particular Specification.

S&F for stainless steel plate rack of size 775mm x 900mm x230mm as per sample kept in GE's office of minimum thickness of strip not less than 0.50mm, fixed in repairs, complete all as directed.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Filling with PCC 1:7:12 in demolished portion of sunken part in cement mortar (1:4) all as specified and directed (e) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on floor & sides of sunken slab sealing all joints to the entire satisfaction of Engineer-in-Charge. Make as per Appx 'E' to Particular Specification.

S&F expanded metal exc 4 Kg cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia all fixing with galvanised steel stapple fixed to steel or wood members laid in any position incl closing after filling.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing, water cooler stand, frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified.

M&L for joint free Glazed ceramic coloured tiles 300x450x7/300x600x7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified.

-ditto- all as per above here in before but except in dado , skirting etc. set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 complete all as speciefied and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as spd and directed.

M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match etc complete all as spd and directed.

ditto as per item No above but in skirting complete all as specified.

Dismentling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified.

M&L for 20 to 25 mm thick Kota stone slab (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring /steps/ riser / skirting complete all as spd and directed.

M&L for 18 to 22 mm thick Kota stone slab in riser, steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab incl rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and complete all as spd and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 40x6 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar , Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, incl taking down old frame/chowkat complete all as spd and directed.

-ditto- all as per above item but here-in size of frame 125mmx60mm for doors complete all as specified.

Taking down shutters from the frame exc 1 Sqm but not exc 2 sqm each, resecuring ,easing adjusting and refixing in same opening complete all as specified and directed.

S&F for 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels and both sides prelaminated with decorative face veneer with lipping/frame to match incl taking down old shutter complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and as directed.

S&F for 2nd class H.W. glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads & taking down old shutter etc complete all as specified.

S&F factory made 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter & 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed .

S & F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

S&F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and all specified.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane incl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

Demolition of cement concrete in any position n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, or using floor subbase complete all as specified and directed.

M&L for 60mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment of any pattern and including 25mm thick sand scushion all wall in rammred and leveled as approved by GE and as per manufacture Instruction complete all as specified.(Shape and size will be approved by GE)

M&L Factory made prepolished precast concrete designer tiles, ISI marked with grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including necessary eathwork RFR and removal complete.

M&L for PCC 1:2:4 type B1, using 20mm graded aggragate as in kerbs or mud stops, rounded or chamfered on edges and sides of tiles completed as specified.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6).complete all as specified.

All as per item No 4 above but except bricks.

S&F in repair double action floor spring hydraulically regualated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repair ordinary/tint sheet glass 5 mm thick in panels of aluminium partition and doors etc fixed with aluminium glazing clips of size 1900x17.3x0.90mm and rubber bedding complete all as specified and directed

S&F One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified.

S&F Iin repair CP cast copper alloy jet spray with 1 mtr PVC type (for European seat) complete all as specified.

S&F in repair Health faucet brass chromium plated with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified.

S&F in repair plastic toilet seat cover of any colour for EWC complete all as specified and diredcted

Dismantling of AC corrugated/CGI sheet , any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

S&F pre painted galvaliume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make as per Appx 'E' to Particular Specification. complete all as specified as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 290 grade E-165 complete all as specified.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in Charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm all as specifiedm and directed

Roof tratetment for non -accessible Roof:- 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound over Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm Top surfaces of roof after carrying out treatment as specifed hear-in -above shall be provided with 2 coats of aluminium paint over a coat of primer as per manufacturing,s indstruction complete all as specified and directed.

M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M & L for repair of RCC (nominal mix) 1:2:4 incl necessary form work and providing plaster of 1:3 and two coat of finishes over a coat of primer for RCC projected portion as in drawts, facia , fins etc incl demolition of existing and providing TMT bars if required all as spd and diected ( Note length of drawts, fins, facia shall be measured in respect of any thickness and height but n exc 300mm and work will be carried out exc 7m height Building) complete all as specified.

M & L for repair of RCC slab , columns, pillars, beams, etc by removing old portion of concrete and cleaning / brushing and removing of loose concrete/ applying reqd cement slurry @ 3.5Kg/Sqm making good with concrete 1:1.5:3 and applying 3mm th cement mortar 1:4 and finish the surface all as spd and directed.

M&L Providing Kitchen cabinet /Cupboard shutter in required size at site made out of 18mm thick MDF made out of 18mm thick one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions.

S&F PVC Coated decorative mild steel curtain rod of 25 mm dia with brackets both side of globe in repairs all as specified and directed by Engr-in-charge.

MAHADEV ENTERPRISES

DAVINDER SINGH

S.K CONSTRUCTION

M/S SHARMA TRADERS

SHIVAE CONSTRUCTION