ADDITION/ ALTERATION AND IMPROVEMENT TO BUILDING NO. P-260 (REGIMENTAL SHOP) AT AFA HYDERABAD

Amount

Demolition of Brick/stone masonry built in cement mortar of any description, etc complete all as specified and as directed

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for foundation, filling and mass concrete complete and including removing rubbish off the permises complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed by Engr-in-Charge.

Taking down chowkats or steel/wooden window /ventilators /door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for RCC tanks/RCC Chajja/Roof projections/RCC Khurras etc complete all as specified and as directed. (Reinforcement cut as required to facilitate demolition)

Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site, etc complete all as specified and as directed

M&L for Forming jambs, etc. to openings in Cement mortar 1:4 or cement lime mortar 1:2:9, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified.

M&L for Making good under cills or over arches, lintels and bressummers in Cement mortar 1:4 or cement lime mortar 1:2:9. including allpinning when necessary cmplete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed.

Taking up or down upto 25 mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints laid in trenches or floors etc complete all as specified and as directed

S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints fixed to walls,, etc complete all as specified and as directed

S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints laid in trenches or floors or in walls, etc complete all as specified and as directed

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal etc complete all as specified and as directed.

S&F PVC (SWR) branch piece , 110mm, Double (double Y) equal or unequal etc complete all as specified and as directed.

S&F PVC (SWR) 'P’ trap110mm etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.

Supply and fix Salt glazed stoneware gully trap, type Q 125x100mmmm, complete all as specified and as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Cutting chases, pinning in stone or brick walls and making good to facings where required and pointing in cement mortar 1:3 and cutting not exc 10 cm girth etc complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out in any type of soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of excavated soil complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M & L cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 mix using 40 mm graded stone aggregate, completed all as specified and directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

Formwork to sides and soffits/edges of floors or roof beams, beam haunchings, gerders, bressummers, lintels, cantilevers, shalves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and directed.

M & L Providing Reinforced cement concrete (Design mix M-25), as in Beams, lintels over 1.50m span , and similar works etc completed all as specified and directed.

Formwork to chajjas, troughs and similar items including edges complete all as specified and directed.

M & L Providing Reinforced cement concrete (Design mix M-25), as in Slabs supported on wall beams and in chajjas all as directed .

M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs/ Plateforms/counters and similar locations etc including necessary form work set in CM 1:4 , complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S&F mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. Used in stirrups, spacers and binders, complete all as specified and directed.

Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 20 to 25 mm thick plaster on concrete or brick work surfaces in CM 1:4, including fixing of suitable GI chicken wire mesh of aperture 40 to 50 mm and gauge of wire 14 all complete, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceiling finished even and smooth (without using extra cement) of any description and in any position, with necessary scaffoldings complete all as specified and as directed by the Engineer in-Charge.

M & L 25 mm thick cement concrete type B-1, 1:2:4 mix, ( 20 mm graded aggregate ) as in sub base of floor finishes, complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade, 10 mm thick (square or rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors/skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

M&L Joint free Non Skid ceramic colour tiles of premium quality 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour etc complete as specified.

S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured, for any type of platform/ counter/ WHB platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

M&L for Screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor tiles/floor finishes.

M&L for rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed.

S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured,for wall lining (veneering to wall ) 12mm thick in cement mortar (1:3) and pointing withwhite cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

M&L rounding to edges of stone slabs one edge, in cooking plotforms complete all as specified

M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surface 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Note: Colour of tile will be finalized by Engr-In-Charge)

S&F Powder coated aluminium ventilators of any size, and any type as directed made out of anodised aluminium extruded section of thickness not less than 1.50 mm, suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles and including all other required fittings as per standard engg. practice, complete all as specified and directed.

S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed

S&F 4 mm thick frosted glass, pin head type and glazing with oil putty in squares n .exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in -Charge.

M & L PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

S&F in repairs Vitreous China squatting pan "Orrissa Pattern", size 580x440mm, white with integral foot rests including CI 'P' or 'S' fixed in repairs including connections to trap with insertion of PVC (SWR) pipes of required length as per site requirements and to flushing pipe, anti-syphonage pipe etc, including making good to floor finish, complete all as specified and directed

S & F Vitreous china, premum / 1st quality wash down water closet wall hung EWC white / ivory / off white, closed pattern incl all necessary accessories like rag bolts / gel gasket ec. (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe,Health faucet ABS body with 1 meter SS braided connection pipe and two way bib tap of make : Cera Cat. No. F8030109AB or equivalent etc, complete all as specified and as directed.

S&F in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets High or low level flushing cistern (exclusive of brackets), and connections to pipes including long bends etc complete all as specified and as directed.

Supply only Liquid water proofing compound.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 455 gms) complete all as specified and as directed.

S&F of Gun-metal globe or gate valves 20mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.

S&F of Gun-metal globe or gate valves 25mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.

S&F Bib taps, CP fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe etc complete all as specified and as directed

S&F stop valves / Angle cocks 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete.

S&F PVC connection 15mm size with brass CP nuts of length 450 mm etc complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F stainless steel grating hinge type 100 mm dia complete all as specified and directed by Engr -in- charge. Make : Cat Part FG92/93 of Pearl / Precision or equivalent

Supply and fix Brass CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed.

S& F of Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified.

supply only of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed by Engr -in- charge.

supply only Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed by Engr -in- charge.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description including preparation of surfaces, not otherwise described over 10 cm width or girth complete all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed.

Supply and fix aluminium alloy butt hinges of 100mm size, and fixed etc complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for SGSW drain pipes complete and including removing rubbish off the permises complete all as directed.

Demolition and breaking up drain / sewage pipes 150 mm dia, (Salt glazed ware, AC or Reinforced concrete) set in concrete mortar, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 150 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

M&L for 150 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed.

Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and as directed.

Demolition, breaking up and removal of 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and in any position, all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 100 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

M&L for 100 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed. Make: Indo/Khandelwal/ Mancheryal Ceramics

Complete removal of the existing treatment on ceiling and applying two coats of distemper oil emulsion over a coat of primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer including preparation of surfaces complete all as specified and as directed.

M&L for preparing of newly plastered external wall surfaces and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer, etc complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces on walls including cornices by two coats of Acrylic emulsion paint exterior grade (100% Acrylic) all as specified and directed by the Engineer-in-Charge.

M&L for complete removal of the existing old treatment on walls and applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion on walls over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty etc complete all as specified and as directed

M & L Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Aluminium paint, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (20 mm graded stone aggregate) as in copings for sewage chamber, bed plates, valley gutters, kerbs etc including necessary form work complete all as specified and as directed.

M&L PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channels for sewage chambers and benching at bottom of drains including forming fair finishes to drains/channels etc complete all as specified and directed.

Surface excavation n exc 30 cm deep and avraging 15 cm deep and getting out soft / loose soil, complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L 75 mm thick PCC (1:4:8) type D2 (40 mm graded aggregate) as in sub base for floors all as specified and as directed.

M/L for Sand filling of 50mm thick under pavers, floors or in foundation including watering and consolidation, etc compelete all as specified.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, etc complete all as specified and as directed.

M/L PCC 1:2:4, type B2 (40 mm graded agg) for 100 mm thick path/ flooring finished even and smooth without using extra cement all as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in top layer of plinth protection, path etc., finished even and smooth without using extra cement complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, all as specified and as directed.

Removal of debris (Aggregates) obatained from demolition including loading and unloading to a distance of 5km from the starting point and deposited where directed etc complete all as specified and as directed.

M&L for Removing the overhead 3 phase ACSR conductors,cross arms,insulators and remove the RCC poles including PCC blocks and make the surface to match with the existing all as Specified and directed by engr in charge .

Supply,laying and testing cable XLPE insulated, screened ,PVC bedded ,galvanized steel strip or wire armoured ,electric power cables (heavy duty) 1100 volts grade with starnded aluminium conductor of size 95 sqmm 3.5 core all as directed by engr in charge.

Supply,laying and testing cable XLPE insulated, screened ,PVC bedded ,galvanized steel strip or wire armoured ,electric power cables (heavy duty) 1100 volts grade with starnded aluminium conductor of size 50 sqmm 3.5 core all as directed by engr in charge.

Supply,laying and testing cable XLPE insulated, screened ,PVC bedded ,galvanized steel strip or wire armoured ,electric power cables (heavy duty) 1100 volts grade with starnded aluminium conductor of size 25 sqmm 3.5 core all as directed by engr in charge.

Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth strip of size 32 x 6 mm as earth lead by means of brazing etc all as shown in electrical plate No 3 connected to earthing test point as specified or indicated including testing on completion. Note:- (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. 3) All the joints should be brazed only brass nuts/ bolts/ washers can be used in the test point complete all as specified and as directed. (LT Panel)

S&F IP65,25W New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source All as directed.

Supply,laying and testing cable XLPE insulated, screened ,PVC bedded ,galvanized steel strip or wire armoured ,electric power cables (heavy duty) 1100 volts grade with starnded aluminium conductor of size 6 sqmm 2 core all as directed by engr in charge.

S&F programmable digital timer switch with minimum switching time of 1 minute and 25A ,240V A.C suitable for automatic operation of lights including connections and make the necessary settings all as dircted by engr in charge.

Supply and lay pipe galvanized iron medium class including fittings of 15mm dia all as specified and directed.

S&F LED solar street light fitting 30 watt including lithium ion battery ,solar panel,charge controller with dusk down sensor complete all as directed by engr in charge.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed by engr in charge. .

Supply,laying and testing PVC insulated cable ,PVC sheathed cable galvanized steel strip or wire armoured ,electric control cables (heavy duty) 1100 volts grade with stranded copper conductor of size 1.5sqmm 2 core all as directed by engr in charge.

Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete all as specified and as directed.

Taking down Exhaust fan, dismantling blades and removing fan all as directed.

Taking down unserviceable MCBs, DBs, Main switches complete all as specified and directed.

Supply and fix exhaust fan A.C single phase 230/240v of size 300mm sweep with blades ,frame and louvers all as directed by engineer in charge.

M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor drawn through caing&capping on walls/roof /with suitable size ,including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thick for fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for the following :- (a) One light point controlled by one switch

(b) One Exhaust fan/ceiling fan point controlled by one switch

(c ) one 5A point on same board

All as per item above but wiring with 2.5 sq mm copper cable with 2.5 sqmm earth continuity conductor.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type single pole one way, 6 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fix switch socket combination 16 Amps 3 pin ,flush type 3 module, ISI marked complete all as specified and as directed.

Supply and fix socket outlet 2 in 1 ,3 pin 5A flush type combined two module , ISI marked complete all as specified and as directed.

S&F of MCB SPN DB,double door 8 way single pole & neutral 240V A.C 50 Hz fixed to the existing wall (concealed) and match the distrubed surfaces with the existing surfaces complete all as specified and as directed.

S&F MCB SP 6 to 32A 240V 'C' Curve 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 32A 240V 'C' Curve 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

S&F surface mounting / wall mounted LED tube light fitting 1x20watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

M&L for removing all connections with existing energy meter and refix it to the New iron sheet with closed enclosure (or) meter box for proper protection all as directed by Engineer in charge.

GUTHIKONDA BROTHERS (BID ID -3088331)

M/s Amit Associates (BID ID -3090798)

S J REDDY (BID ID -3094856)

M/s RAMA LAKSHMI CONSTRUCTIONS (BID ID -3095142)