Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC | L1 | Accepted-AOC being lowest | |
| 2 | L2₹49.6 L+₹1.8 L (3.79%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹50.7 L+₹2.9 L (6.07%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹52.1 L+₹4.3 L (8.94%)Rejected-Finance SAI LEELA MAHAVIR COLONY BIRLA HOUSE GOLA KA MANDIR MORAR GWALIOR 474005 | GWALIOR | GWALIOR | MADHYA PRADESH | 474005 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹52.2 L+₹4.3 L (9.05%)Rejected-Finance DH 101 DEEN DAYAL NAGAR MAHARAJPUR GWALIOR 474020 MP | GWALIOR | MADHYA PRADESH | 474020 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹81.9 L
EMD Value
₹1.5 Cr
Closing Date
14 Nov 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF Gwalior
HQ Commander Works Engineers AF Gwalior MP 474020
REPLACEMENT OF EXISTING PERIMETER BRICK WALL WITH RCC WALL AT AF STN GWALIOR
2024_MES_680168_1
86003/E8
Open Tender
Civil Works
Item Rate
270 days
AF Stn Gwalior
Asper tender documents
9 documents required · 9 mandatory
₹1,000
GE (AF) (Adm Area) Gwalior
₹1.5 Cr
Yes
3 Jan 2025
18 Oct 2024
20 Nov 2024
18 Oct 2024
14 Nov 2024
2 Nov 2024
Amount
Demolition of brickwork of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.
Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Excavating over areas n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.
M&L for Reinforced Cement concrete design Mix M-25 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforced Cement concrete design Mix M-25 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced Cement concrete design Mix M-25 (using 20mm graded stone aggregate ) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia ,complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.
S&F Mild steel work in fencing post or struts using angle / flat/ round bar of grade Fe-290 (E-165) including cutting top to shape as required drilling holes, notching for wire, (for securing wire mesh etc) including all necessary welding, drilling, bolting etc complete all as specified & directed.
S&F rolled mild steel plates of Fe-410-W(Gde-E250)quality-B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, as complete all as specified & directed
S & F 16 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified & directed.
M&L preparation of new steel surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S &F PVC pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S&F concertina coil 600mm dia (in stretched position)10 metre openable length (total length 90 metre ) having 50 Nos rounds per 6 meter length, hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail GI clips/staple (18SWG) fixed over razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razer wire with the help of hog rings(14SWG) complete all as specified & directed. (Note:- Razor wire and angle iron shall be measured and paid separately.
S&F 2.5mm thick razor wire of high tensile strength of 165 kg/sqmm with tape(.52mm thick) and minimum weight 43.47 gm/metre legth, hot dip galvanised steel wire coated with CLR anti corrosive paint fixed on swan neck angle iron complete all as specified & directed. (Note:- Angle iron shall be measured and paid separately.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated soil exc 250 m but not exceeding 500 m and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L for preparation of surface and applying 5 mm thick ready mix plaster with polymer modified premixed ready to use cement base mortar on concrete/ brick surface as specified and directed by Engr-in-charge
M/S LAKSHYA CONSTRUCTIONS (BID ID -3161569)
m/s vikash Engineers (BID ID -3164725)
M/s Gulshan and Brothers (BID ID -3165182)
M/s Bijender Singh (BID ID -3159907)
SHRI RAM CONSTRUCTION (BID ID -3161131)
lodhi builders (BID ID -3165030)
M/s Kohli Builders (BID ID -3161055)
M/s. Ravi and brothers (BID ID -3164953)
Bidder Name
M/s Gulshan and Brothers
m/s vikash Engineers
M/s. Ravi and brothers
lodhi builders
M/s Bijender Singh
SHRI RAM CONSTRUCTION
M/s Kohli Builders
M/S LAKSHYA CONSTRUCTIONS
M S BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .