SPECIAL REPAIR / REPLACEMENT OF OLD HPSV FOOTPATH LIGHTS TO LED GARDEN LIGHTS AT HOR AND LAWN BEHIND SUDAN BLOCK AND CERTAIN RW WORKS AT NDA KHADAKWASLA

Amount

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 1.5 sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size 1.5Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 having top cover of laminated sheet 3 mm thick duly cut as per site requirement with cadmium plated stell screw and washers including making good the distrubed surfaces and matching it with existing surface for the One light/Fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item No 1 but One 3 pin socket outlet, 5/6 Amps, independent

Ditto all as per item No 1 but One 3 pin socket outlet, 5/6 Amps on the same board with other switches

Ditto all as per item No 1 but One 3 pin socket outlet , 15/16 amps on independent board with cable 4 Sqmm and 4 sqmm as earth wire

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including modular PVC box with cover plate with frame suitable for switches, sockets, fan regulator etc for One light/Fan point controlled by one way switch 6 Amps 240 volts

All as per item No 5 but One 3 pin socket outlet, 5 Amps, independent board

All as per item No 5 but One 3 pin socket outlet, 5/6 Amps on the same board with other switches

All as per item No 5 but One 3 pin socket outlet , 15/16 amps on independent board with cable 4 Sqmm and 4 sqmm as earth wire

All as per item No 5 but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

S&F modular switch one way 6 Amp, 1 module

S&F modular switch one way 16 Amp, 1 module

S&F modular Bell Push 6 A, 1 module

S & F modular Socket, 6A - 2/3 pin,2 module

S & F modular Socket, 6A/16A - 2/3 pin,2 module

S&F in replacement of modular fan regulator 120W,240V, 2module, suitable for ceiling fan of 1200/1400mm sweep

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 19mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 04Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping shall be measured as one RM)

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including surface PVC conduit not less than 20mm complete with accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 04 Sqmm cable with 01run of 04 Sqmm earth wire along with PVC Conduit shall be measured as one RM)

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

Supply and fix in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps, 240 volts complete with all accessaries etc all as directed

M & L in replacement of door bell AC 230 volts single phase ding dong type all as specified and directed.

S&F LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency,integrated aluminum heat sink suited for installation in T8 tube light G13 lamp holders all as specified.

S&F 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified .

S&F 1x10 watt, 230 V surface and wall mounted LED batten (for mirror) including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting all as specified and directed

S&F LED security light fiitting 20 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed

M&L in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

Supply and fixing of ceiling fan of sweep 1200mm, 240 volts of not less than 5 star BEE rating milk white coloured connecting up with twin core 1.0 sqmm cable from ceiling rose including required length of hanging rod with fan hook duly fixed to ceiling with suitable fastner all as specified. Note :- suitable size hole is to be made on wall by core cutting and the cost of the same is deemed to be included.

M&L for metal body exhaust fan of sweep 225/230 mm single phase 240v of not less than 5 star BEE star rating louvers including cutting window wire mesh and grill as per the required size of the exhuast fan and fixing on suitable size plywood not less than 10 mm in thickness with proper fastner arrangements and all accessories and making good the disturbed surfaces. Note :- suitable size hole is to be made on wall by core cutting and the cost of the same is deemed to be included.

Taking down the ceiling fan carefully and cleaning/Servicing the fan if any repairs/replacing of parts required complete including painting the fan with enamel spray paint white coloured and fixing back the fan with fixing accessoires required at site.

Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F MCCB with rating of 100 Amps, 415 Volts 4 pole with 16 kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu). MCCB should be with suitable spreaders and phase barriers for each terminals.

S&F in replacement MCB DB 04 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F MCB SP 6 to 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

Supply and fix in replacement of C Curve MCB DP 6-40 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed.

M&L for laying XLPE underground cable 10 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

M&L for laying XLPE underground cable 25 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

Excavation in trenches, Soft/loose soil, n.exc 1.5m wide and n. exc 1.5 m depth and getting out in for laying of cable and pipe etc :

Returning and filling in, including spreading and well ramming in layers n exc 25 cm all as specified and directed.

Removing excated material a distance n. exc 50 m & depositing where directed at a level n. exc 1.5 m above the starting point.

M&L for laying of reinforced concrete pipe, dia of 100 mm 2 nos half round for bottom and top and before laying excaved area shall be levelling all as specified and directed by Engr-In- Charge . Note: One half round Top and One half round bottom together will be considered as one running meter.

Supply, installation, testing and commissioning LT Feeder Panel weather proof outdoor type double door, fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7032 (Siemens Gray) shade with matt finish with seven tank pre treatment process. The panel shall be fabricated by CPRI approved manufacturer only. The panel shall be compartmentized design totally enclosed, dust and vermin proof, conforming to degree of protection IP-55, front side double door type with locking arrangement for front side and nut bolt fitting for back side, comprising of gaskets between all adjacent units and beneath all covers shall be fully gasketed with neoprene rubber and ventilation arrangement for heat dissipation from both side of panel. The panel shall be provided with aluminium bus bars, electrolytic grade of adequate rating or specified below. The busbars and Interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB & Black colour coding. The bus bars shall be supported on unbreakable, non-hygroscopic SMC insulated supports at sufficiently close intervals to prevent busbars sag and shall be housed in dedicated compartment. The panel shall be prewired with FRLS PVC insulated copper conductor cables of suitable size properly tagged and secured. All joints and connection shall be done with galvanized or cadmium plated high tensile nuts, bolts and washers including Lugs etc. The panel shall be provided with digital multifunction meter 4410 Series, Accuracy Class 1 with RS 485 Parameters with cast Resign CTs and RYB, ON, OFF & Trip LED indicating lamps at incoming. The panel shall be showing the arrangements of circuit shall be pasted inside the panel door and covered with transparent laminated plastic sheet . The panel shall be provided with manufacturer's name plate, skull & bones danger notice board etc. The panel shall be provided 4 Nos 50x50x6mm thick angle iron supports of not less than each 1 mt height duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth as per site requirement . All MCCBs shall be provided with spreader links with phase separators on both sided and suitable extended rotary handles for all incoming and outgoing MCCB complete all as specified and as directed. The overall size of the panel shall not less than 1500mmX400mmX1200mm (LxBxH). The panel shall be provided for Cable entry from bottom side for required No of Cable with suitable size of SS Cable Glands including 2 Nos of Earting Terminals one on each side of the Panel with earth strip and including following accessories:- Note : (a) Quoted price deemed to include PCC and Earthwork. (b) Drawing of panel shall be approved before manufacturing. a) 4 Nos bus bars of high conductivity aluminium alloy for phase (R,Y,B,N) suitable for 300 Amp rating. b) Incoming MCCB 4P 160 amps, 36 KA breaking capacity with adjustable thermal and adjustable magnetic overload protection with Ics =100% of Icu - 01 Nos c) Outgoing MCCB 4P 100 amps, 25 KA breaking capacity with adjustable thermal and adjustable magnetic overload protection with Ics =100% of Icu - 03 Nos Make : L&T/Legrand/Schneider d) ON LOAD change over switch four pole with advance Neutral 200 Amps current rating manual changeover front side handle operated conforming to IS 13947 (Part-3) - 01 Nos (e) LED type phase indicator lamp RYB, ON, OFF & TRIP.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground vertically to a depth not less than 2.25mtr deep below ground level with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised iron strip 32 x 6 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 15 mm dia (medium grade) including concrete pit in PCC (1:3:6) type C-1, RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil complete all as specified and as directed and testing on completion.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25mtr deep below ground level with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised iron strip 25x4 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 15 mm dia (medium grade) including concrete pit in PCC (1:3:6) type C-1, RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil complete all as specified and as directed and testing on completion.

Taking down existing service connection of any type including GI wire with insulators complete.

S&F White cover plate with frame, 1 module

S&F PVC unbreakable surface boxes suitable for modular switches 1 module.

Supply, Fixing and Installation of 16 mtr Octagonal hot dip galvanised highmast and suitable for wind velocity as per IS 875. It shall also include accessories'for high mast including head frame, steel wire rope 6 mm dia trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 8 luminaires 'symmetrically. The mast shall have an integral powertool installed inside the base compartment for its operation.foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates incl luminaire mounting arm, pully assembly, twin dome aviation /obstruction light lightning arrester spike including Excavation(any type of soil strata), RCC foundation as per height as recommended by the manufacturer , Errection of the highmast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated, Sheathed copper conductor cable of 10sqmm 4 core (from timer panels to fittings)of suitable size & cores incl cables lugs /thimbles complete all as specified and directed.

Suply & fixing of 300 watt LED flood light luminaire with inbuilt driver with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66, including all necessary arrangements suitable for 16 mtr high mast light complete all as specified and directed

Supply & Laying, jointing & testing of UG LT cables XLPE insulated, aluminium conductor multi stranded armoured heavy duty 1100 Volt grade cross sectional area 16 sqmm 4 core all as specified and directed

Excavation in trenches, Hard/Dense soil, n.exc 1.5m wide and n. exc 1.5 m depth and getting out in for foundation of pole, stay, laying of cable and pipe etc all specified.

Ditto all as per item No 52 but Soft/disintegrated soil

M&L for laying of half round reinforced concrete pipe, of dia 150 mm, half round for bottom and half round for top and before laying excaved area shall be leveled. complete all specified and directed. Note : 01 Half round top and 01 half round bottom together will be considered as one running meter. Make as per sample given.

Supply and install ,testing and commissioning of factory made outdoor hut roof type size of 100x35x100 CM , CPRI approved, weather proof LT Panel made out of MS angle iron size 40x40x6mm & MS CRCA sheet of 3.15 mm thick with double door including locking arrangements Kiosk type with base frame grouted in ground including necessary earthwork,The panels shall be provided RYB LED Indicators with control wiring 01 Set. PCC all arround the penal upto 0.3 mtrs etc. and fixing arrangements powder coated including bus bar chamber with insulated, aluminium bus bar of rating 100 Amps including switch gear for high mast light incl all joints and connection shall be done with galvanised or cadmium plated screws/bolts , suitable lugs and as follows :-INCOMING (a) MCCB 100 Amps 4 pole 415 Volts 50Hz rupturing capacity 16 KA - 1Nos for Incoming (b) RYB indicator lamp LED type (Set of three) - 1 Set OUT GOING (a) MCCB 4 Pole 40 Amps 415 V, 16 KA - 03No

S&F of automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, comprising of 40 Amps 3 Pole MCB, power contactor and 230V digital time switch for controlling LED/SV etc street lights , including earth work for fixing Timer switch distribution Board and shall be provided 4 Nos 35x35x4mm thick angle iron supports of not less than each 0.6 mt height duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth as per site requirement all as specified and directed.

S&F Vertical Stationary type electric water heater closed/vented type, inner body made out of copper of capacity 25 Litres suitable for 230 volts , single phase AC 50 HZ Supply ISI marked to IS:2082 (Part /1993) (reffirmed 2004) with latest amendments and having BEE Star (5 Star Rating) complete including grouting with nut bolts/fastners of suitable size complete all as specified and directed.

S&F GI mesh flexi connection pipes 15 mm dia suitable for hot & cold water of length not less than 600 mm long with metallic nuts on both ends of pipe.

M&L point wiring with 4 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly for one 3 pin 15 amps socket outlet.

S&F of MCB single pole 32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.

S&F Modular AC Box for 20 A SP MCB, with surface mounted Unbreakable Heavy Duty Plastic Enclosure including 1 nos ISI marked Plug Top and 1 nos 20 A SP modular MCB complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings such as tee, bend, joint etc. and fixed to wall or laid in floor complete all as specified and directed.

S&F 15 mm bore stop valves, fancy type, cast chromium plated, high pressure, screwed both ends for iron pipe or for union and fixed comple all as specified and directed.

S&F 15mm bore bib taps, fancy type, cast chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for cutting existing steel tubing for alteration or additions of 15 mm dia with all fittings complete all as specified and directed.

M&L for laying XLPE underground cable 6 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

Supply & fix in replacement GI tubing light grade 40 mm dia isi marked with all fittings laid in trenches or fixed pole by flat iron clamps,ut,bolt,washers suitable size all as specified and directed at size.

Supply and Fixing in replacement 1x18 watt WW (3000K) LED outdoor garden light with polycarbonate diffuser and IP 65 protectionall as directed.

S&F distribution box 2 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, qty-1 nos, MCB SPN 06 Amp 230V, 50 HZ, complete all as specified and directed

M&L PCC 1:3:6 type C-1 (40 mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed including demolition exsiting PCC

M&L for PCC 1:4:8 (40 mm graded aggregate) Cement concrete in foundations, filling and mass all as specified and directed including demolition exsiting PCC

M&L for road /hardstanding /Foot path cutting of surface wherever required and making good to match with existing surface as per site requirement.

S&F in replacement integral 40 Watt LED post top lantern black/ copper dust painted cast aluminium spigot, spun aluminium canopy with clear acrylic cover and accessories complete with 50 mm OD black powder coated MS pipe not less than .3mtr length with suitable 5 mm thick ms base plate with provn of 04 Nos anchoring bolts complete all as specified and directed.

S&F of automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, comprising of 32 Amps 3 Pole MCB, power contactor and 230V digital time switch for controlling garden lights , including earth work for fixing Timer switch distribution Board and shall be provided 4 Nos 35 x 35 x4 mm thick angle iron supports of not less than each 0.6 m height duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth as per site requirement complete all as specified and directed.

M/S CHANDAN BUILDERS

Tejas Enterprises

KESARI AND SONS

Green Ray Enterprises

CHAITANYA WINDWELL