REPAIR AND MAINTENANCE OF FURNITURE AT NAYA RAIPUR AND KOTA RAIPUR MIL STN UNDER AGE (I) NAYA RAIPUR

Amount

Repairs to Table bed side : complete with the following specification and directed. FD-273

Supply and fixing for side of table bed side of size(450 x 230 x 510 mm ) using 18mm thick pre- laminated particle Board natural teak shade for side of table bed side after cutting and making to size and shape all as shown on drawing fixed in repairs including applying two coats of french polish after preparation of surfaces as specified all as shown on drg and as directed by Eng-in-Charge.

Supply and fixing for 12mm ply wood for shelf in repairs of table bed side after cutting and making to size and shape all as shown on drawing fixed in repairs including applying two coats of french polish after preparation of surfaces as specified all as shown on drg and as directed by Eng-in-Charge.

Supply and fixing for 6mm ply wood for back side in repairs of table bed side after cutting and making to size and shape all as shown on drawing fixed in repairs including applying two coats of french polish after preparation of surfaces as specified all as shown on drg and as directed by Eng-in-Charge.

Repairs to Form with out back : complete with the following specification and directed. FD-77(M)

Supply and fixing 1st class hard wood( teak wood) plank of Form with out back of size 1525mm x 255mm x 25 mm including applying two coats of French Polish to 1st class hard teak wood complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) and all steel/iron surface shall be painted with two coats of black enamel paint over two coat of primer as specified fixed in repairsall as shown on drg and as directed by Eng-in-Charge.

Repairs to Chair Dining : complete with the following specification and directed. FD-279

Taking out old unserviceable front left / Right leg and supply and fixing of new teak wood front left/right leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable rear left / Right leg and supply and fixing of new teak wood rear left/right leg all as shown in drawing specified and directed by EIC.

Taking out old unserviceable front/back seat rail, supply and fixing of new teak wood front/back seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable side seat rail, supply and fixing of new teak wood side seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable back strip, supply and fixing of new teak wood back strip all as shown in drawing specified and directed by EIC

Taking out old unserviceable stiffener , supply and fixing of new teak wood stiffener all as shown in drawing specified and directed by EIC

Taking out old unserviceable PVC shoes , supply and fixing of new PVC Shoes with steel steel screw superior quality all as shown in drawing specified and directed by EIC

Polishing to chair dining with French Polish wooden after replacement of above components

Repairs to Chair Writing : complete with the following specification and directed. FD-280

Taking out old unserviceable front left/right leg , supply and fixing of new teak wood front left/right leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable rear left/right leg , supply and fixing of new teak wood rear left/right leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable front/back seat rail , supply and fixing of new teak wood front/back seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable side rail , supply and fixing of new teak wood side seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable back strip, supply and fixing of new teak wood back strip all as shown in drawing specified and directed by EIC

Taking out old unserviceable stiffener , supply and fixing of new teak wood stiffener all as shown in drawing specified and directed by EIC

Taking out old unserviceable PVC shoes , supply and fixing of new PVC Shoes with steel steel screw superior quality all as shown in drawing specified and directed by EIC

Taking out old unserviceable left/right arm rest, supply and fixing of new new teak wood left/right arm rest all as shown in drawing specified and directed by EIC

Polishing to chair dining with French Polish wooden after replacement of above components

Repairs to Chair Easy : complete with the following specification and directed. FD-229

Taking out old unserviceable front left/right leg , supply and fixing of new teak wood front left/right leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable rear left/right leg , supply and fixing of new teak wood rear left/right leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable front/back seat rail , supply and fixing of new teak wood front/back seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable side rail , supply and fixing of new teak wood side seat rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable vertical left/right rail of back support , supply and fixing of new teak wood vertical left/right rail of back support all as shown in drawing specified and directed by EIC

Taking out old unserviceable top/bottom rail of back support , supply and fixing of new teak wood top/bottom rail of back support all as shown in drawing specified and directed by EIC

Taking out old unserviceable left/right arm rest, supply and fixing of new new teak wood left/right arm rest all as shown in drawing specified and directed by EIC

Taking out old unserviceable PVC shoes , supply and fixing of new PVC Shoes with steel steel screw superior quality all as shown in drawing specified and directed by EIC

Preparation of existing decorated surface , removing all spot filling with putty , varnishing & polishing

Repairs to Table Dining 6/8 pers wooden : complete with the following specification and directed. FD-273

Taking out old unserviceable top and supply and fixing of new top all as shown in drawing specified and directed by EIC

Taking out old unserviceable leg and supply and fixing of new teak wood leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable long rail and supply and fixing of new teak wood long rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable short rail and supply and fixing of new teak wood short rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable stiffener of top and supply and fixing of new teak wood stiffener of top all as shown in drawing specified and directed by EIC

Taking out old unserviceable PVC rings , supply and fixing of new PVC rings with steel steel screw superior quality all as shown in drawing specified and directed by EIC

S&F of new brackets with 08 Nos new screws of suitable sizebracket made out of Ist class hardwood(MP Teak)of size 75mm x75mm x 25mm complete all as shown in drawing specified and directed by EIC

Preparation of existing decorated surface , removing all spot filling with putty , varnishing & polishing

Repairs to Bed Ply Top : complete with the following specification and directed. FD-246

Taking out old unserviceable head rest and fixing of new head rest all as shown in drawing specified and directed by EIC

Taking out old unserviceable foot rest and fixing of new foot rest all as shown in drawing specified and directed by EIC

Taking out old unserviceable plywood of head board and supply and fixing of new plywood 3mm teak shed in both side all as shown in drawing specified and directed by EIC

Taking out old unserviceable plywood of foot board and supply and fixing of new plywood 3mm teak shed in both side all as shown in drawing specified and directed by EIC

Taking out old unserviceable long rail and supply and fixing of new teak wood long rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable short rail and supply and fixing of new teak wood short rail all as shown in drawing specified and directed by EIC

Taking out old unserviceable leg and supply and fixing of new teak wood leg all as shown in drawing specified and directed by EIC

Taking out old unserviceable stiffener and supply and fixing of new teak wood stiffener all as shown in drawing specified and directed by EIC

Taking out old unserviceable plywood and supply and fixing of new plywood 12mm BWR all as shown in drawing specified and directed by EIC

Polishing of bed plywood top with French Polish wooden portion exposed to direct view after replacement of above components

Repairs to Chapoy GI Niwar/Ply Top : complete with the following specification and directed. FD-220

Taking out all unservicable Plywood of Charpoy and supply anf fixing of new plywood made out of 12mm thick plywood (Make : SUDARSHAN PLYWOOD,KITPLY,GREENPLY,CENTURY PLYWOOD ANDSWATICK PLYWOOD)BWR ISI marked with 6 nos of nut and bolt over charpoy,complete all as shown in drawing specified and directed by EIC

Taking out all unservicable nylone Niwar of Charpoy and supply anf fixing of new plywood made out of 12mm thick plywood (Make : SUDARSHAN PLYWOOD,KITPLY,GREENPLY,CENTURY PLYWOOD ANDSWATICK PLYWOOD)BWR ISI marked with 6 nos of nut and bolt over charpoy,complete all as shown in drawing specified and directed by EIC

Taking out old unserviceable 3 way GI Elbow from existing GI Charpoy and and supply and fixing of new 3 way GI Elbow 32mm bore(fully housed) and 70mm long all as shown in drawing specified and directed by EIC

Supply and fixing of FI/MS Square tubes at centre including fixing and welding complete all as shown in drawing specified and directed by EIC

Taking out old unserviceable leg shoe of charpoy with hard top and supply and fixing of new leg shoe hardwood complete all as shown in drawing specified and directed by EIC

Taking out old unserviceable leg from existing GI charpoy with new leg(size 440mm) made out of old broken short rail and welded new cup of MNF set and fixing GI shoes/gitties same asexisting supply and fixing of new leg shoe hardwood complete all as shown in drawing specified and directed by EIC

Taking out old unserviceable long rail from existing GI Charpoy and supply and fixing of new thread long rail size 1980mm long, 32mm dia medium grade GI Pipe (ISI Mark)IS No 1239 Paret 1(Make : TATA,JINDAL,PRAKASH) complete all as shown in drawing specified and directed by EIC

Taking out old unserviceable short rail from existing GI Charpoy with new short rails(size 900mm) made out of old broken long rails , obtained from sl No 6 above and and all as per Drg and specification

Taking out old unserviceable check nuts from existing GI Charpoy and supply and fixing new GI Hexagonal check nut 32mm dia 10mm wide thickness of check nut shall not less than 6 mm all as specified and directed by EIC.

Repairs to Chapoy ORs MS Tube ply top : complete with the following specification and directed. FD-285

Taking out old unserviceable plywood from Charpoy steel and supply and fix in repairs 12mm thick plywood top of size 1950mmx 900mm(single piece) BWR grade ISI Mark with MS Screws as shown in drawing specified and directed by EIC

Supply and fixing legs of Charpoy steel with MS 32mm square tube 1.6mm thick 400mm long, two support rail and clamp for MNF fixed by continous welding to long and short rail ofCharpoy ORs to suit with the existing components including painting the entire new exposed steel surface with two coats of synthetic enamel paint over a coat of primer complete made of superior quality all as shown in drawing specified and directed by EIC

Taking out old unserviceable PVC shoes from Charpoy steel and , supply and fixing of new PVC Shoes four nos with steel steel screw superior quality all as shown in drawing specified and directed by EIC

Repairs to Locker Steel : complete with the following specification and directed. FD-1029

Taking out old unserviceable worn out legs of locker steel and providing with new legs fabricated out of 1mm thick MS Sheet made toshape and size fixed in position by means of welding all as per Drg including painting the new steel surface with two coats of first quality synthetic enamel paint Olive Green by spray painting over a coat of Red Oxide primer after necessary preparation of surface all as shown in drawing specified and directed by EIC

Taking out old unserviceable hasp and stapple of Locker Steel and providing with new hasp and stapple 100mm all as shown in drawing specified and directed by EIC

Taking out old unserviceable handle of Locker Steel and providing with new handle 125mm all as shown in drawing specified and directed by EIC

Repairs to Chair CBA,CB Steel with /without arms & cushion : complete with the following specification and directed. FD-75 (M)

Taking out old unserviceable seat from Chair CB Steel with arms and supply and fixing of new seat made out of second class air seasoned hard wood of size 400mm x 435 mm duly canned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size 4 Nos nut and bolts with washers all as shown in drawing specified and directed by EIC

Taking out old unserviceable seat from Chair CB Steel without arms and supply and fixing of new seat made out of second class air seasoned hard wood of size 440mm x 400 mm duly canned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size 4 Nos nut and bolts with washers all as shown in drawing specified and directed by EIC

Removing of unserviceable seat from chair CBA steel with Arms and supply and fixing new seat made out of second class air seasoned hard wood of size 400 mm x 435mm duly canned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size 4 Nos nut and bolts with washers all as shown in drawing and as directed by Engineer-in-Charge.

Taking out old unserviceable back from Chair CB Steel with arms and supply and fixing of new back made out of second class air seasoned hard wood of size 460mm x 380 mm duly canned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size 4 Nos nut and bolts with washers all as shown in drawing specified and directed by EIC

Taking out old unserviceable back from Chair CB Steel without arms and supply and fixing of new back made out of second class air seasoned hard wood of size 420mm x 400 mm duly canned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size 4 Nos nut and bolts with washers all as shown in drawing specified and directed by EIC

Removing of unserviceable back from CBA steel with Arms and supply and fixing new back made out of second class air seasoned hard wood of size 460 x 380mm duly caned with 2mm wide plastic cane and 4mm wide cane for beading and fixed to the chair with 100 x 6mm size bolts, 04 Nos with nut and washers all as shown in drawing and as directed by Engineer-in-Charge

Taking out old unservicaeble arms from chair tubular steel with arms and Supply and fixing of new arms made out of second class hard wood with suitable size of crews including painting the wooden surface with two coats of synthetic enamel paint over a coat of primer complete all as shown in drawing specified and directed by EIC

Taking out old unservicaeble rubber bush from the bottom of the chair tubular steel with and without arms and Supply and fixing of new syntheticrubber bush of size as per existing with suitable size of screw all as shown in drawing specified and directed by EIC

Materials and labour for painting to chair including welding wherever necessary and duly preparing the surfaces by sand papering and remove the stains and applying a coat of Ist quality synthetic enamel paint(Olive Green/Grey Smoke/Black) all as shown in drawing specified and directed by EIC

Table Office Clk/Office Officer steel :complete with the following specification and directed. FD-1003/1004

Taking out old unserviceable table top of table office clerk steel and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19 mm teak wood edging alround table top fixed as per drg No FD-84/FD-1004 and as directed by Engineer-in-Charge.

Taking out old unserviceable table top of table office officer steel and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19mm teak wood edging alround table top fixed as per drg No FD-1003 and as directed by Engineer-in-Charge.

Supply and fixing legs of various Tables mentioned above with MS 25mm Square tube 1.6mm thick 760mm long fixed by means of continuous welding to rails of Table to suit with the existing components including painting the entire new exposed steel surface with two coats of synthetic enamel paint over a coat of zinc chromate primer complete including rubber shoes made of superior quality all as per drawing and as directed by Engineer-in-Charge.

Taking out old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel made out of 1mm thick MS sheet bent to shape & made to size all as per Drg No FD-84/ FD-1004 including lock & painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

Repairs to Chair Verandah : complete with the following specification and directed. FD-256

Removing of unserviceable cane plastic from chair varandah, cleaning tublar surface & necessary prepration and two coat of spray painting with first quality synthetic enamel paint white and recanning the chair varandah with 4mm wide half round new plastic cane asper drg and also fix new rubber shoes for all four legs as per drawing and as directed.(Note: Quoted rate is inclusive for recanning, spray painting & providing 4 Nos rubber shoes to legs)

Repairs to Table Centre : complete with the following specification and directed. FD-274

Supply and fixing in replacement of top 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply / Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all sround including polishing to match the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in repairs Legs of size 30 x 60 x 356mm using teak wood for Table centre of size 900 x 450x 400mm after cutting and making to size and shape including applying two coats of french polish after preparation of surface as specified all as shown on drg and as directed by Eng-in-Charge.

Supply and fixing in repairs Stiffener of size 50 x 20mm at bottom using teak wood for Table centre of size 900 x 450x 400mm after cutting and making to size and shape including applying two coats of french polish after preparation of surface as specified all as shown on drg and as directed by Eng-in-Charge.

Supply and fixing in repairs Top rail of size 20 x 50mm x 850 mm long using teak wood for Table centre of size 900 x 450x 400mm after cutting and making to size and shape including applying two coats of french polish after preparation of surface as specified all as shown on drg and as directed by Eng-in-Charge.

Supply and fixing in repairs bottom rail of size 20 x 50mm x 420mm long (long) using teak wood for Table centre of size 900 x 450x 400mm after cutting and making to size and shape including applying two coats of french polish after preparation of surface as specified all as shown on drg and as directed by Eng-in-Charge.

Repairs to Peg Table : complete with the following specification and directed. FD-277

Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of front/ side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

M&L French Polishing to peg Table of any description width of girth including cleaning and preparation of the surface for the articles of peg table complete all as specified and directed and shown on drawing.

Repairs to Table 3' x 2' with/without drawer : complete with the following specification and directed. FD-283

Supply and fixing in replacement of top 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engineer-In-Charge

Repairs to Table 900x600x760mm : complete the following specification and directed. FD-1007

Supply and fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

M&L French Polishing with Hi-gloss French polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engineer-In-Charge

RECANNING OF VARIOUS TYPES OF CHAIRS. Removing of old plastics cane and M & L for recanning of various type of chairs and couches with & including new plastic cane complete all asspecified and asperGodrej pattern with approved best quality plastic cane complete all as specified and directed by EIC.

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 3,025.00

Chetna Enterprises