Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.3 LAccepted-AOC | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹22.9 L+₹2.0 L (9.40%)Rejected-AOC | L-2 | Rejected-AOC other than lowest bidder | |
| 3 | L-3₹22.9 L+₹2.0 L (9.46%)Rejected-AOC | L-3 | Rejected-AOC other than lowest bidder | |
| 4 | L-4₹24.8 L+₹3.9 L (18.5%)Rejected-AOC | L-4 | Rejected-AOC other than lowest bidder | |
| 5 | L-5₹28.8 L+₹7.9 L (37.6%)Rejected-AOC NEAR CENTRAL JAIL LAXMI NAGAR P S RAMPUR DISTT GAYA PIN 823001 BIHAR | GAYA | GAYA | BIHAR | 823001 | L-5 | Rejected-AOC other than lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ram G
GE Kaluchak Pin-900673 C/O 56 APO
WELCOME MAINTENANCE AND CERTAIN MISC BR AND EM WORKS FOR OFFICERS MD ACCN AT BD BARI MIL STN UNDER GE KALUCHAK
2023_MES_592317_1
GE/KC/NIT-11/2023-24
Open Tender
Civil Works
Item Rate
270 days
Kaluchak
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Kaluchak
₹60,000
Yes
14 Aug 2023
29 Apr 2023
3 Jun 2023
29 Apr 2023
27 May 2023
13 May 2023
29 Apr 2023 - 6 May 2023
Amount
Preparation of old decorated plastered or unplastered surface of walls including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of walls including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc., filling of wall care putty on uneven surfaces and applying one coat of oil emulsion distemper, complete all as specified & directed.
Complete removal of existing treatment of any description from wall surfaces by washing, rubbing down and stopping of distempered/painted wall surfaces and applying 2mm thick wall care putty and painted with two coats of oil emulsion distemper over a coat of primer, complete all as specified & directed.
Preparation of old decorated plastered surface of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of cement base paint, complete all as specified & directed.
Preparation of old decorated wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.
Preparation of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.
Taking down cement plaster on brick or stone surfaces etc. upto triple storey including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.
15mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
15mm thick rendering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
10mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed.
Preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whitening, complete all as specified.
Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint over a coat of cement primer, complete all as specified & directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified & directed.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified & directed.
Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.
Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed.
Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm on vertical surfaces such as skirting/dado etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed.
Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.
Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm, as in vertical surfaces such as skirting/dado etc., set and and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles of size 450mmx300mm thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed.
Precast designer coloured heavy duty full body paving tiles (factory made) of size 300mmx300mm x 10mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed.
Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified & directed.
25mm thick PCC 1:2:4 nominal mix, type B-0, using 12.5mm graded stone aggregate as in sub base, finished even and fair to receive floor finishes, complete all as specified & directed.
75mm thick PCC 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in plinth protection, surface finished even and smooth without using extra cement, complete all as specified & directed.
75mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor, hard standing, path, pavings etc, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed.
Granite (black), 18-20mm thick as in floor, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing & half rounding of exposed edge of stone over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.
Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified & directed.
Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified & directed.
TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed.
RCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.
Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each and refixing in the same opening after carrying out necessary repair, complete all as specified & directed.
Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
PCC 1:3:6, nominal mix, type C-0, using 12.5mm graded crushed stone aggregate as in back fill of chowkats and bed plate of holdfast and similar items, complete all as specified and as directed.
35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.
35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.
Solid PVC door/cup board frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.
Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.
Steel ventilator with top hung shutter including hinges, steel peg stay, complete including taking down old unserviceable ventilator, complete all as specified & directed.
Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or 2nd class soft wood beading etc, complete all as specified & directed.
Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or 2nd class soft wood beading etc, fixed in repairs, complete all as specified & directed.
Butt hinges, medium weight, cold rolled, mild steel 100mm long, complete all as specified & directed.
Aluminium handle, cast type, anodised, 150mm long, complete all as specified & directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, 300mm long, complete all as specified & directed.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long, complete all as specified & directed.
300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel and fixed to pressed steel frame / MS frame/ wooden chowkhats including necessary welding work etc where-ever required, complete all as specified & directed.
5mm thick tinted glass as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified & directed.
Aluminium anodized powder coated (minimum thickness 50 micron) frame for doors, windows, ventilators with one or more rebates or two/three track including joining cleat for fixing etc, complete all as specified & directed.
Aluminium powder coated (minimum thickness 50 micron) three track window consiting of 02 Nos glazed and 01 No gauged shutter using 1.60mm thick aluminium sheet/section for all aluminium members, size of section for window 18.00 x 58.00mm including necessary jointing cleats, glazing clips, rubber packing, suitable locking arrangements for each shutter, suitable handle 1 No in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed. Note : Sheet glass & wire mesh will be measured and paid separately under respective item.
Aluminium anodised powder coated (minimum thickness 50 micron) window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed. Note : Sheet glass will be measured and paid separately under respective item.
Anodised aluminium powder coated (minimum thickness 50 micron) designer grill of 5-6mm dia of mesh size 50x50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading, complete all as specified & directed.
18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framed work as in cup board shutters, shelves etc., fixed in repairs, complete all as specified & directed.
18/19mm thick block board, grade 2 quaility, exterior grade, commercial type, fixed with screws to timber frame work as in cupboard, fixed in repairs, complete all as specified & directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40mm, complete all as specified & directed.
40mm dia, copboard knobs fixed with nut, screw and washer of mild steel, brass polished, complete all as specified & directed.
100mm size Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified & directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, n exc 1.5 sqm, complete all as specified & directed.
3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or glazing pins in metal frame in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.
3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads or glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.
Dismantling water tanks of capacity of 1000 litres, complete all as specified & directed.
Dismantling water tanks of capacity of 500 litres, complete all as specified & directed.
Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layered, hoisted & fixed in position of capacity 1000 ltrs including making necessary arrangements for fixing of inlet, outlet, over flow pipe, wash out pipe etc, complete all as specified & directed.
Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) triple layered, hoisted & fixed in position of capacity 500 ltrs including making necessary arrangements for fixing of inlet, outlet, over flow pipe, wash out pipe etc, complete all as specified & directed.
Cleaning and removing all scale and dirt, etc, from tanks of capacity 500 ltrs and from mouths of circulating pipes, etc., complete all as specified & directed.
Cleaning and removing all scale and dirt, etc, from tanks of capacity 1000 ltrs and from mouths of circulating pipes, etc., complete all as specified & directed.
20mm bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms), fixed in repairs, complete all as specified & directed.
Taking up or down steel tubing and connections 20mm bore, complete all as specifed & directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed.
Galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors , complete all as specified and directed.
Galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors , complete all as specified and directed.
Refixing old steel tubing and connections of 20mm bore in new or old position (Walls, ceiling, floors etc.) including cleaning for refixing, complete all as specified and as directed .
Refixing old steel tubing and connections of 15mm bore in new or old position (Walls, ceiling, floors etc.) including cleaning for refixing, complete all as specified and as directed .
Stop valves, cast copper alloy, 20mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Stop valves, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified & directed.
Stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe, fixed in repairs, complete all as specified & directed.
Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified & directed.
PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified & directed.
PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified & directed.
Stainless steel grating of 125mm size (square/round), male/female pattern with or without hole, fixed in nahani/floor traps with white/coloured cement, fixed in repairs, complete all as specified & directed.
Jet spray chromium plated with 1 mtr long tube for 15mm bore pipe and mild steel chromium plated hinging device for pedestal type WC, fixed in repairs, complete all as specified & directed.
Hand Shower (Health Faucet) brass chromium plated with 1 meter long easy flex tube in chrome finish & wall hook, fixed in repairs, complete all as specified & directed.
Toilet paper holder, vitreous china, box type, fixed to walls with chromium plated screws, fixed in repairs, complete all as specified & directed.
Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified & directed.
PVC cabinet made of ABS material of size 450x600mm with glass front, fixed in repairs, complete all as specified & directed.
Vitreous china wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixed with screws of suitable size including making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified & directed.
Vitreous chinaware squatting pan, 'Orissa Pattern' size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified & directed.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified & directed.
Vitreous china, wash hand basin, flat back, white of size 580mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed.
Dismantling of cast iron or reinfored concrete drain pipes, jointed in cement mortar and taking out of trenches or fixed with walls, if required, internal dia of pipe 75mm / 100mm, complete all as specified & directed.
PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified & directed.
110mm bore PVC (SWR) bends any radius, complete all as specified & directed.
PVC (SWR) branch piece, single (single Y) equal or unequal, 110mm bore, complete all as specified.
PVC (SWR) junction single (Single T) equal or unequal, 110mm bore, complete all as specified & directed.
PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified & directed.
75mm bore PVC (SWR) bends any radius, complete all as specified & directed.
PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore, complete all as specified.
PVC (SWR) junction single (Single T) equal or unequal, 75mm bore, complete all as specified & directed.
PVC (SWR) vent cowl of size 75mm bore, complete all as specified & directed.
Sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union to pipe etc. and overall size 495x420mm with bowl size 410x330x160mm including 40mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, 40mm dia PVC waste pipe of adequate length, fixed in repairs, complete all as specified & directed.
Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc., overall size 915x460mm with bowl size 410x330x160mm, 40mm dia PVC waste pipe of adequate length, fixed in repairs, complete all as specified & directed.
20mm dia PVC coated drapery rods in one length per door/window, fancy type (engraved rods), designed & colour as approved by GE, provided with one no. funnel and bracket on each end, fixed in repairs, complete all as specified & directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 113 here-in-before, complete all as specified & directed.
Glass corner shelf assembly (3 pieces) for bathroom, wall mount type made of 5.50mm thick sheet glass with 12mm wide chromium plated bracket guard, complete all as specified & directed.
Taking down carefully, copper / aluminium conductor unserviceable / perished point wiring (any type) for light/ fan/ light socket or power socket etc complete with fittings such as switches, sockets, ceiling roses, pendant holders, bracket holder, light fittings, regulators etc, including making good to disturbed surfaces of wall/floor etc, complete, all as specified & directed.
Taking down carefully unserviceable main switche fuse unit, distribution boards of any type/size from their position including making good to disturbed surfaces of wall etc, complete all as specified & directed.
Taking down carefully existing sub main wiring with aluminium conductor/copper conductor cable of any size with GI earth wire including wooden batten etc and making good disturbed surface of walls etc, complete all as specified & directed.
Taking down carefully electric meter of any description by disconnecting electrically and refixing the same in old or new location, complete all as specified & directed.
Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan/bell point controlled by one way switch using proper colour coding, complete all as specified & directed.
All as per Srl item No. 121 above but for one 3/5 pin 6 Amps socket outlet on independent board.
All as per Srl item No. 121 here-in-before but for one 3/5 pin 6 Amps socket outlet on same board.
Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 4.0 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 2.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one 3/5 pin socket outlet 15/16 Amps independent using proper colour coding, complete all as specified & directed.
Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC casing and caping 'ISI marked' of 20/30mm size as required, fixed on wall/ceiling surface, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan/bell point controlled by one way switch using proper colour coding, complete all as specified & directed.
All as per Srl item No. 125 above but for one 3/5 pin 6 Amps socket outlet on independent board.
All as per Srl item No. 125 here-in-before but for one 3/5 pin 6 Amps socket outlet on same board.
Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 4.0 Sqmm drawn into and including PVC casing and caping 'ISI marked' of 20/30mm size as required, fixed on wall/ceiling surface, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 2.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one 3/5 pin socket outlet 15/16 Amps independent using proper colour coding, complete all as specified & directed.
Switch piano flush type 6 Amps 240 volt, single pole one way, complete all as specified & directed.
Bell push flush type, one way 6 Amps single pole one way, complete all as specified & directed.
Switch socket combination, two in one, 5 pin type, 5/6 Amp, flush type universal, 240 volt, complete all as specified & directed.
Switch socket combination, two in one, 6 pin type, 6 & 15/16 Amp, 240 Volt, flush type universal, complete all as specified & directed.
Ceiling rose surface type, bakelite 65mmx50mm, 3 terminals, 240 Volt, complete all as specified & directed.
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified & directed.
Electronic bell, Ding Dong AC. 230 volts, single pole, complete all as specified & directed.
Inverter LED lamp 6500K, 900lm in white colour of 9 watt, base cap B-22 with poly carbonate diffuser and aluminium heat sink, complete all as specified & directed.
Electronic fan regulator, 2 module, 120watt, (5 stepped type), 240 Volt for 1200/1400mm sweep AC ceiling fan, complete all as specified & directed.
Tube light fitting integrated type suitable for LED 20W (4 feet) indoor, decorative aluminium extruded T5 LED batten complete with housing with all accessories pre-wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting, complete all as specified & directed.
Sub main wiring using uniform coding of wiring with two runs of 6 Sqmm single core FRLS PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn into and including PVC concealed conduit 'ISI marked' of 25mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required with all fittings and fixing accessories & one run of 6 Sqmm FRLS PVC insulated solid copper conductor for earth continuity wire in green colour, complete all as specified & directed. Note:- Two runs of copper conductor 6 sqmm and one run of 6 Sqmm copper earth wire including PVC conduit of 25mm dia will be measured and paid as one unit only.
Sub main wiring using uniform coding of wiring with two runs of 6.0 Sqmm single core FRLS PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn into and including PVC casing caping medium grade (double lock) of 25mm size as required, fixed on surfaces of wall/ceiling with all fittings and fixing accessories & one run of 6.00 Sqmm FRLS PVC insulated copper conductor for earth continuity wire in green colour, complete all as specified & directed. Note:- Two runs of copper conductor 6.0 sqmm and one run of 6.00 Sqmm copper earth wire including PVC casing caping will be measured and paid as one unit only.
Factory made epoxy powder coated distribution board, SPN, 8 ways with metal double door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .
Factory made epoxy powder coated distribution board, SPN, 12 ways with metal double door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .
MCB, single pole, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' curve, complete all as specified & directed.
MCB, single pole & neutral, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' curve, complete all as specified & directed.
Factory made epoxy powder coated distribution board vertical type, VTPN, 4 ways with metal double door (IP-43 protection) confirming to IS : 8623, fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 200 Amp copper bus bar, neutral bar, standard DIN rail, earth bar, cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one MCCB 63/100/160 Amp 4P as incomer and MCBs SP/TP as outgoing, complete all as specified & directed.
MCCB of capacity 63 Amps, 4 pole, 415volt, 50Hz, rupturing capacity 25 KA (minimum) or higher, ATM (Thermal magnetic release), adjustable overload 80-100%, adjustable short circuit 5-10 In, complete all as specified & directed.
Intergral LED security light luminaire 60W LED, 230 volts made up of pressure die cast aluminium housing powder coated with high power SMD LED’s lens & toughned glass IP-66, luminaire, mounted on & including GI bracket made out of 50mm bore medium grade pipe of 1.70m length, bent to required shape, fixed on PCC/Steel pole with 02 Nos. clamps of flat iron (40 x 6mm), nuts, bolts and washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer, making connection with PVC copper conductor cable of 1.5 sqmm and taking down old unserviceable light fitting of any type/size, complete all as specified & directed.
Sheet metal enclosures single pole and neutral enclouser with a two pin and earth plug with socket complete with one MCB DP 20 Amps, 240 volts including taking down old unserviceable sheet metal enclouser, complete all as specified & directed.
Plug top, 3 pin, 15 Amps, 240 volts, 50 Hz AC supply including taking down old unserviceable plug top, complete all as specified & directed.
Tamper proof with inbuilt intelligence electronic energy meter, single phase, two wire direct connected meter with parameter (voltage P-n, PF, frequency current line KW demand, LCD display, optical port class 1.0s), 240 volts 10-60 Amps, complete with meter box single phase with locking arrangements molded in UV stabilised transperant/ flame retardant high grade engineering plastic with unique arrangements for plifer proof interlocking with hinge type box with connection of suitable size wire including seal and sealing wire including taking down old unserviceable energy meter and depositing in MES store yard, complete all as specified & directed. Notes : (i) MES No to be marked on the meter with black paint as directed. All details ie Bldg No, Qtr No, Initial Reading, SL No of new meter etc as per specified format are to be submitted by the contractor.
Switch piano flush type 6 Amps 240 volt, single pole one way including taking down old unserviceable switch , complete all as specified & directed.
Bell push flush type, one way 6 Amps single pole one way including taking down old unserviceable bell push, complete all as specified & directed.
Switch piano flush type 15/16 Amps 240 volt, single pole one way including taking down old unserviceable switch , complete all as specified & directed.
Socket outlet, 5 pin type, 6 Amp, flush type, 240 Volt including taking down old unserviceable socket, complete all as specified & directed.
Socket outlet, 6 pin type, 15/16 Amp, flush type, 240 Volt including taking down old unserviceable socket, complete all as specified & directed.
Switch socket combination, two in one, 5 pin type, 6 Amp, flush type universal including taking down old unserviceable switch socket combination, 240 volt, complete all as specified & directed.
Switch socket combination, two in one, 6 pin type, 6 & 15/16 Amp, 240 Volt, flush type universal including taking down old unserviceable switch socket combination, complete all as specified & directed.
Ceiling rose surface type, bakelite 65mmx50mm, 3 terminals, 240 Volt including taking down old unserviceable ceiling rose, complete all as specified & directed.
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including taking down old unserviceable lamp holder, complete all as specified & directed.
Electronic bell, Ding Dong AC. 230 volts, single pole including taking down old unserviceable bell, complete all as specified & directed.
Electronic fan regulator, 2 module, 120watt, (5 stepped type), 240 Volt for 1200/1400mm sweep AC ceiling fan including taking down old unserviceable fan regulator, complete all as specified & directed.
Tube light fitting integrated type suitable for LED 20W (4 feet) indoor, decorative aluminium extruded T5 LED batten complete with housing with all accessories pre-wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including taking down old unserviceable tube light fitting, complete all as specified & directed.
Capacitor 2.5/ 3.15/ 4 MFD for ceiling fan, 230 volt, AC, 50Hz conforming to IS:1709 including taking down old unserviceable capacitor, complete all as specified & directed.
MCB, single pole, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' curve including taking down old unserviceable MCB, complete all as specified & directed.
MCB, single pole & neutral, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' curve including taking down old unserviceable MCB, complete all as specified & directed.
MCB, TP, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 415 Volt, 'C' curve including taking down old unserviceable MCB, complete all as specified & directed.
MCB, FP, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 415 Volt, 'C' curve including taking down old unserviceable MCB, complete all as specified & directed.
3mm thick laminated bakelite sheet, cutting to 9"x11" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers including taking down old unserviceable laminated sheet, complete all as specified & directed.
3mm thick laminated bakelite sheet, cutting to 5"x7" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers including taking down old unserviceable laminated sheet, complete all as specified & directed.
3mm thick laminated bakelite sheet, cutting to 7"x9" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers including taking down old unserviceable laminated sheet, complete all as specified & directed.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL), connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore 'light grade' galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt etc including connected to test point and testing on completion, complete all as shown in electrical plate No 3 of SSR Part-I 2009 & as directed.
Taking down carefully ceiling fans from any height of any sweep/ make /model after disconnecting electric connections, dismantling and opening the body of ceiling fan, examine for repairs including servicing, overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts, spring washers for blade/body etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance, complete all as specified & directed.
Notes : (i) Rates quoted by contractor shall deemed to be inclusive all minor items as mentioned above and no extra payment shall be admissible on this account. (ii) Spare parts will be measured and paid separately under relevant item of schedule as supply only. (iii) Rewinding of fan motor, painting will be measured and paid separetly under relevant item of Schedule A. (iv) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate. (v) Transportaion charges to approved workshop for necessary repairs and testing shall be deemed to be included in quoted rate of this item as approved by Engr-in-Charge.
All as per Serial Item No. 172 above but exhaust fans 300mm/450mm sweep.
Rewinding of ceiling fan of 1200mm / 1400mm sweep of any make/model/type with new super enamelled copper wire of existing gauge including supply and fixing necessary E Class insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing, complete all as specified and directed.
Rewinding of heavy duty exhaust fan motor of 300mm/450mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns and assembling of fan motor and rotor and testing including removing burnt out copper winding wire from fan motor complete all as specified and directed.
Preparation of old painted surfaces of ceiling fan by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and painting by applying synthetic enamelled first quality paint using spray gun in situ including filling cavities with filler and marking Srl No SM No / MES No with black paint, complete all as specified & directed.
Supply only brass bush suitable for ceiling fan/ exhaust fan of any sweep/ type /size, complete all as specified & directed.
Supply only ball bearing No. 6201/ 6202/ 6203/ 6204 for ceiling fan/exhaust fan of any sweep, complete all as specified & directed.
Supply only capacitor 2.5/ 3.15/ 4 MFD for ceiling/ exhaust fan, 230 volt, AC, 50Hz conforming to IS:1709, complete all as specified & directed.
Supply only rubber reel with nuts bolts clamp and washers of suitable size for ceiling fan complete all as specified and as directed.
PVC insulated flexible multistranded copper wire, three core of size 23/0.0076 including taking down old unserviceable copper wire, complete all as specified & directed.
GEYSERS Repair/maintenance of storage type electric water heater (Geyser ) vertical or horizontal type of 50 Ltr capacity comprising of the followings : (a) Inspection, taking down, opening or dismantling, de-scaling,brushing and thoroughly cleaning the storage tank up to the satisfaction of the Eng-in-charge. (b) Checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc in situ to ensure free movement of the parts including supply and replacing the washers/ gasket nut etc. (c) Checking and rectify earth continuity of the Electrical circuits of the Geysers and power point. (d) Checking, re-fixing thermostat and re-adjust. (e) De-scaling the immersion type heating element and siphon assembly with diluted Hydro chloric acid or clear pedette solution. (f) Checking of indicator lamp for it serviceability.
(g) Re-assembling the Geyser, re-installation and testing complete. (h) The rate for above item are deemed to include for transportation of geyser to the work shop as approved by Engr-in-Charge/GE for necessary repairs and testing of Geyser at workshop. Note : Parts / components of geysers found unserviceable shall be replaced by the contractor. New parts/components required shall be measured and paid separately under item here-in-after as supply only and labour charges required for replacement are deemed to be included in the quoted rate of this item.
All as per Srl item No.182 above but of capacity 25 Ltr
Supply only thermostat (Adjustable type) of Rod/stem Type EST-11EM, 20A resistive, 250 Volt, opening on temperature rise of approved make and having ISI mark, complete all as specified & directed.
Supply only copper siphon geyser assembly 6/9 hole suitable for 50 ltrs capacity geyser of any make as required at site of approved make complete with inlet and outlet, provision for thermostat pipe with drain pipes & drain plug, screws, studs, clamps for fixing heating elements, gasket etc., complete all as specified & directed
All as per item No. 185 above but siphon assembly suitable for 25 ltrs capacity Geysers.
Supply only heating elements of capacity 2.0 KW, AC, 240 Volts suitable for storage type electric water heater as per site requirement (press type / screw type / triangular / circular base or ceramic cartige type), ISI marked, complete all as specified & directed.
Supply only geyser indicator pilot lamps (red and green lamps) with wiring, round/ square/ rectangle type suitable for geysers of any type/capacity, complete all as specified & directed.
Supply only new 3 core PVC insulated copper cable size 2.5 Sq mm round 1100 volt grade as in connection, complete all as specified & directed.
Supply only safety valve suitable for 25 Ltr/ 50 Ltr geyser all as specified and as directed.
Supply only chromium plated PVC connection pipe 15 mm dia, 600mm long with end nuts and washer, suitable for hot water outlet of geyser, complete all as specified and directed.
Supply only non return valve 15mm bore as in replacement of old one and connection and testing complete all as specified and as directed.
Supply only PVC connection pipe 15 mm dia, 450mm long with end nuts and washer, suitable for cold water intlet of geyser complete all as specified and directed.
BALVINDER SINGH AND SONS
M/S Vishwakarma Builders
M/s Des Raj and Sons
M/s Ashok Kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .