Supply of Butter Fly Valves and Spares Installed at Ash Handling System, Unit 5 and 6 of CSCTPP Chhabra

Auto Butterfly valve with pneumatic actuator Body : CI Rubber lined, Flanged Ends Drilled as per ASME B 16.5 150# , Pressure rating : PN10. Disc : CF8M Shaft : SS410, Seat : EPDM(Bonded), Test pressure : 15 kg/cm2(Body), Seat : 11 kg/cm2

Auto Butterfly valve with pneumatic actuator Body : CF8M, Flanged Ends Drilled as per ASME B 16.5 150# , Pressure rating : PN10. Disc : ASTM A351 CF8M Shaft : SS316, Seat : Nitrile rubber, Test pressure : 15 kg/cm2(Body), Seat : 11 kg/cm2

Butterfly valve pneumatic double acting Body : CS , Class : 300 , End connection : Lugged wafer drilled as per ANSI/ASME Class 300, Seat : RTFE, Shaft : SS Body : CS , Disc : CS, Design Temprature: 50 Kg/cm2

Butter Fly Valve (waferred type) as per IS : 13095 having hydraulic body testing of 24 KG/CM sq. and seat tested on 16 KG/CM sq. with carbon steel fabricated lever with O ring tapper pin bush, bearing bush, stamp & CI disc and body as per IS:210

Gear Operated Butterfly Valve (waferred type ) as per IS: 13095 having hydraulic body testing of 24 KG/CM sq. and seat tested on 16 KG/CM sq. with carbon steel fabricated lever with O ring , tapper pin bush, bearing bush, stamp & CI disc and body as per IS:210

Butterfly Valve with Worm Gear , Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-4 Bar, Temp.-150°c, Fluid- Air, Size-250 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Worm Gear , Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-2 Bar, Temp.-150°c, Fluid- Air, Size-300 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Worm Gear , Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, working Pr. -6.2 Bar, Temp.-50°c, Fluid- Air, Size-300 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Worm Gear , Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-3.3 Bar, Temp.-40°c, Fluid- Treated water, Size-100 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Hand lever and notch Disc, Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-4 Bar, Temp.-40°c, Fluid- Treated Water Size-100 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator (Double Acting) , Wafer Type , Pneumatic Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-4 Bar, Temp.-50°c, Fluid- Air, Size-50 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator (Double Acting) , Wafer Type , Pneumatic Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-4 Bar, Temp.-50°c, Fluid- Air, Size-100 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator (Double Acting) , Wafer Type, Pneumatic Operated, Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-4 Bar, Temp.-50°c, Fluid- Air, Size-150 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator ( Double Acting) , Wafer Type , Pneumatic Operated , Pr. rating – PN10, MFG. Std.- EN593, working Pressure-5.4 Bar, Temp.-40°c, Fluid- water, Size-100 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator ( Double Acting), Wafer Type, Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-2 Bar, Temp.-150°c, Fluid- Air, Size-300 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Pneumatic Actuator ( Double Acting), Wafer Type, Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-2 Bar, Temp.-150°c, Fluid- Air, Size-250 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butterfly Valve with Hand lever and notch Disc, Wafer Type , Manual Operated , Pr. rating – PN10, MFG. Std.- EN593, Working Pressure-1 Bar, Temp.-100°c, Fluid- Air, Size-150 NB

A. Set of O ring for Thust Pad, O ring for Shaft, Replaceable Seat, Thrust Pad of above valve

B. Disc of above valve

Butter Fly Valves PN 10 working Pr. 10 Kg / Cm2 Construction :- Manually operated B/F valve, out door enclosed gear operated double flanged. Designed for non-shock shut off pressure 20 kg. / Cm2 .Design, Engineering, manufacturing and testing conforming to BS:5155 and general as per guide lines specified in AWWA C-504 C 75B as well as IS 7326.MOC :- 1) Body and Disc- 2% Nickel cast iron IS: 210 GRFG 260. 2) Valve spindle – 18-8 type stainless steel to ASTM A 479.type 316 3) Bearing – Teflon – Glacier – DU make or approved equal 4) Valve Seat – 18-8 type 316 Stainless Steel / ASTM A – 351 Gr.CF8M 5) Disc Seal and O-rings – Renewable Nitrile rubber 70 to 75 A shore hardness. 6) Gland – Mild Steel IS : 2062 or Grey cast iron 7) Gland packing – Teflon 8) Seal retaining ring – 18-8 type 316 stainless steel / retaining segment) ASTM A-351 Gr. CF8M 9) Internal pins, screws – Stainless steel type 316 and other hardware 10) External Bolts, nuts and washers etc. – High tensile steel, cadmium plated 11) Gear Casing – Grey Cast Iron to IS:210 Gr.FG:260 water tight casing Gears – Phosphor bronze Pinions – Nickel-Molybdenum steel 12) Pins screws & hardware – Stainless Steel type– 316 in following sizes:

Butter Fly Valves with Pneumatic Actuator, wafer type, PN-10 flanged drilling std-ASME B-16.5 #150, Pressure Rating , MFG STD-EN593, Test standard- 12266 Part-I, Body-15 Kg/cm2, Pr-4Kg/cm2, 150 0 C workingTemperator , Body- Cast Iron IS-210 Gr FG 260, SEAT- -EPDM, Disc- SGI DIN 1693 GGGLU+EPOXY, Seal- 11 Kg/cm2, Seal Leakage Tight shut off class-VI, Flow Direction- Bidirectional , Actuator- Double Acting

Butter Fly Valves with Pneumatic Actuator, wafer type, PN-16, Pneumatic operated ,flanged drilling std-ASME B-16.5#150, Pressure Rating MFG STD-EN593, Test standard- 12266 Part-I, Body-15 Kg/cm2, Pr-4Kg/cm2, 150 0 C workingTemperator , Body- Cast Iron IS-210 Gr FG 260, SEAT- -EPDM, Disc- SGI DIN 1693 GGGLU+EPOXY, Seal- 11 Kg/cm2, Seal Leakage Tight shut off class-VI, Flow Direction- Bidirectional , Actuator- Double Acting

Butter Fly Valves with worm gear, wafer type, manual operated, PN-16 flanged drilling std-ASME B-16.5#150, Pressure Rating , MFG STD-EN593, Body-15 Kg/cm2, Pr-4Kg/cm2, 150 0 C workingTemperator Cast Iron IS-210 Gr FG 260.

Butter Fly Valves motor operated, wafer type, PN-16, Motor operated , flanged drilling std-ASME B-16.5#150, Pressure Rating , MFG STD-EN593, Test standard- 12266 Part-I, Body-15 Kg/cm2, Pr-4Kg/cm2, 150 0 C workingTemperator , Body- Cast Iron IS-210 Gr FG 260, SEAT- -EPDM, Disc- SGI DIN 1693 GGGLU+EPOXY, Seal- 11 Kg/cm2, Seal Leakage Tight shut off class-VI, Flow Direction- Bidirectional , Actuator- Double Acting

Cast Stainless Steel Lever operated ,wafer type , Butterfly Valves Class – 150 Construction – Lever operated , full bore, wafer type ends, Design, Engineering, manufacturing and testing conforming to ASTM B16.34 hydraulic body testing of 16 KG/CM sq. and seat tested on 10 KG/CM sq. i) Body - ASTM A 351 Gr. CF8M. ii) Bearing Bush –Gun metal iii) Sleeve- EPDM iv) O-Ring –VITON v) Disc - ASTM A 351 Gr. CF8M. vi) Spindle– S.S. AISI316 vii)Disc Pin– S.S. AISI316 viii) Gland Packing – PTFE ix)LN cap– Stainless Steel x) Lever:- Carbon Steel In Following sizes:-

Butterfly valve:- SS316 Manually gear Operated Class – 150 Construction – Gear operated , full bore, flanged ends, Design, Engineering, manufacturing and testing conforming as per AWWA C 504 hydraulic body testing of 21.08 KG/CM sq. and seat tested on 10.54 KG/CM sq. i) Body - Cast Iron IS:210 Gr. FG260 ii) Disc – Cast Iron. IS:210 Gr. FG260 iii) Drive Shaft-Stainless steel. ASTM A479 TYPE410 iv) Stub Shaft–Stainless steel.ASTM A479 TYPE410 v) Bearing Bush-Stainless steel BACKED PTFE vi) Clamping Ring / Seg.–Stainless steel.ASTM A351 Gr. CF8 vii) Seat Ring – Stainless steel. ASTM A240 Gr. TYPE304 viii) Valve Seal – Nitrial Rubber. SHORE HARDNESS 70-75A ix) End Cover Plate – Carbon Steel IS:2062 Gr-B x) Thrust Pad -SG Cast Iron. IS:1865 Gr 500/7 xi) Gland Plate :-Carbon Steel. IS:2062 E250 BR xii) O-Ring :- Nitrial Rubber.SHORE HARDNESS 65-70A xiii) Shaft Pin :- Stainless steel.ASTM A479 TYPE410 xiv) Name Plate :- Stainless steel.ASTM A240 TYPE304 xv)Flow direction plate :- Stainless steel.ASTM A240 TYPE304 xvi)Gear Box:- Mfr’s Standard BOKM 64 RATIO 50:1 xvii) Stud and Nut :-High Tensile Steel IS: 1367 CL-8.8 AND CL-5 xviii) Hand Wheel :- Carbon Steel In Following Sizes :-

Butterfly valve:- SS 316 Manually Gear Operated Butterfly valve pressure Class – 150B Construction – Gear operated , flanged ends, bidirectional, Design, Engineering, manufacturing and testing as per AWWA C 504 hydraulic body testing of 21.08 KG/CM sq. and seat tested on 10.54 KG/CM sq. Design Pressure 10.00 Kg/cm seq. and blade strength test pressure with water 21.08 KG/CM sq. i) Body - Stainless Steel. ASTM A351 Gr CF8 ii) Disc –Stainless Steel. ASTM A351 Gr CF8 iii) Drive Shaft-Stainless steel. ASTM A479 TYPE304 iv) Stub Shaft–Stainless steel.ASTM A479 TYPE304 v) Bearing Bush-Stainless steel.BACKED PTFE vi) Clamping Ring / Seg.–Stainless steel.ASTM A351 Gr. CF8 vii) Seat Ring – Integral Type. viii) Valve Seal – Nitrial Rubber.SHORE HARDNESS 70-75A ix) End Cover Plate – Stainless steel. ASTM A240 TYPE304 x) Thrust Pad -Leaded Bronze. LB2 BS1400 xi) Gland Plate :-Stainless steel. ASTM A240 TYPE304 xii) O-Ring :- Nitrial Rubber.SHORE HARDNESS 65-70A xiii) Shaft Pin :- Stainless steel.ASTM A479 TYPE304 xiv) Name Plate :- Stainless steel.ASTM A240 TYPE304 xv)Flow direction plate :- Stainless steel.ASTM A240 TYPE304 xvi)Gear Box:- Mfr’s Standard BOKM 64 RATIO 50:1 xvii) Stud and Nut :-High Tensile SteelIS: 1367 CL-8.8 AND CL-5 xviii) Hand Wheel :- Carbon Steel In Following Sizes :-

Butterfly Valve:- Electrically Operated Class – 150 Construction – Gear operated , full bore, flanged ends, Design, Engineering, manufacturing and testing conforming to ASTM B16.34 hydraulic body testing of 30.06 KG/CM sq. and seat tested on 22.43 KG/CM sq. Design test on 14.8 KG/cm sq. i) Body - Cast Carbon Steel. ii) Disc – Cast Carbon Steel. iii) Drive Shaft-Stainless steel. iv) Stub Shaft–Stainless steel. v) Bearing Bush-Stainless steel Backed PTFE. vi) Clamping Ring / Seg.–Stainless steel. vii) Seat Ring – Stainless steel. viii) Valve Seal – Nitrial Rubber. ix) End Cover Plate – Carbon Steel. x) Thrust Pad -SG Cast Iron. xi) Gland Plate :-Carbon Steel. xii) O-Ring :- Nitrial Rubber. xiii) Shaft Pin :- Stainless steel. xiv) Name Plate :- Stainless steel. xv)Flow direction plate :- Stainless steel. xvi)Gear Box:- Mfr’s Standard xvii) Stud and Nut :-High Tensile Steel xviii) Hand Wheel :- Carbon Steel xix) Actuator :- Mfr’s Standard In Following Sizes :-

Butterfly valve for hydraulic system (medium- hydrol68 oil) as Size: DN-125, Rating: CL150 & Pressure;19.6

Butterfly valve for hydraulic system (medium- hydrol68 oil) as Size: DN-85, Rating: CL150 & Pressure;19.6.

VIVEK ENTERPRISES