Providing and installation of high mast at ward no.25 deaf and dumb school premises at zone-06 limits

Providing and installation of high mast at ward no.25 deaf and dumb school premises at zone-06 limits

Fabrication,Supplying,Erection,TestingandCommissioningof.12 m mslongPolygonhighmastwithSingle/Multipletelescopicsectionshaving,(minimumoverlapdistanceof1.5timesoftopsectionthicknessasperBSEN10025grade...

Fabricating, supplyinganderectionof .ms longhotdipGalvanized OctagonalhotdipPolewithBSEN10025gradeS355JOsteelplate for shaft, IS2062 for base platewithdoor opening arrangements, including suitable boa...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonate/cl...

Supplying and fixing telescopic M.S. bracket fabricated by using

0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long

M.S.Bracket and are welded with suitable angle, using 6mm thick M.

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 A

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20" x 2...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 4...

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying, fixing,wiring,earthelectrodeforgroundingconduits, I.C.

cutouts andother equipment'son themeter boardusing40mmdia

2.90mmthickGIpipe2.5mlongburiedinapit .Thepit shouldbe

filledwithequalpropor...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm...

Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 40/33 mm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth

upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,

Supplying and Displaying necessary Danger Boards a...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hookin(issue rate dated on 08/10/202...