Loading
Loading…
Loading…
Tender Value
₹22.2 L
EMD Value
₹44,492
Closing Date
12 Oct 2026, 1:00 pm5d left
Executive Engineer
Office of the Executive Engineer, Civil Division-XV (N), GIDC Building, VI Floor, Patto Plaza, Panaji-Goa
Providing and making Galvulium sheet and PUF sheet roofing for GIS control room at Calangute
2026_ED_32120_1
EE/DIV-XV/ED/NOTICE- 23(26-27)/813 Dated 01/10/2026
Open Tender
Civil Works
Percentage
90 days
Calangute
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
₹44,492
2 Oct 2026
2 Oct 2026
13 Oct 2026
2 Oct 2026
12 Oct 2026
2 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead. | 0.67 | cu.m | 1,618 | ₹1,084.06 |
| 2 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. | 3.59 | cu.m | 1,136 | ₹4,078.24 |
| 3 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation upto plinth level | 2.89 | cu.m | 6,346 | ₹18,339.94 |
| 4 | Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. | 2.89 | cu.m | 929 | ₹2,684.81 |
| 5 | HDGI Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 5,551.02 | kg | 216 | ₹11,99,020.32 |
| 6 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. | 182.54 | sq.m | 107 | ₹19,531.78 |
| 7 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. | 227 | sq.m | 870 | ₹1,97,490 |
| 8 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. | 61.84 | Metre | 408 | ₹25,230.72 |
| 9Providing & fixing colour coated Alluminium (PUF) sandwich panel roofing systems of approved make adhering to Aluminium 3105 grade for top & bottom sheet of thickness 0.40 & 0.35 respectively including PUF insulation betewwn the top & bottom sheet of Denslity 40 (+/-2) Kg/m3 inclusive of S.S.304 grade self tapping fastneres, complete as directed by Enigneer incharge (frame work for roof, roof accesorries to be paid seperately) for tile Design PUF roof panel, Gutter width should be atleast 25% more than the Crest width. Minimum height at heighest point of Crest should be minimum 65mm. Minimum thickness at anygiven point should not be below 30mm. | |||||
| 9.01 | PUF Insulated tile roof 50mm thick of trapezoidal design | 155.19 | Sqm. | 2,822 | ₹4,37,946.18 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.11 MB
Tendernotice_2.pdf
PDF • 7.69 MB
BOQ_32505.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .