Repairs to Pathway Hard standing Chain link fencing barbed wire fencing boundary wall area drainage culverts kerbstone and plinth protection under AGE B/R-I GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

All as per Item 4 (here-in-before) but except stone slab

M&L for machined pressed precast concrete interlocking paver block glossy with grey cement and pagment, any shpae and size confirming to IS 15658-2006 of 60mm thickness M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates over a layer of stone dust cushion of 30mm thick sand cushioning and joints filled with fine sand incl leveling & sweeping etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Digitally printed paver tiles 300mm x 300mm having thickness of 10 mm with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors laid over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge Make:- Dura stone by Somany/Endura by Johnson or equivalent as approved by GE.

Material and labour in repairs for granite slab, 20 mm thick laid over and including 15 mm thick screed in cement and sand mortar (1:6), jointed and pointed with white or coloured cement to match on kitchen platform and shelves including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge

Material and labour machine cut cudappah stone slab 20-25 mm thick, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for chequred cement concrete tiles 20X20X25mm thick set, jointed & pointed in neat cement slurry as in floor with grey cement & pigment incl 15mm thick screed bed in cement and sand morth (1:6) finished even and fair etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block /brick masonary/stone masonry/Kerb stone built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement and sand morthar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:3:6 type C1 using 20 mm graded mechanically crushed stone aggregates as in cills, steps, bands, copings, bed plates, kerbs, hold fasts blocks etc including weathering slightly rounded or chamfered angles of throating including necessary form work etc complete all as specified and directed by Engineer-in-Charge

M&L for Precast Cement Concrete (1:2:4) type- B-1 (using 20 mm graded stone aggregate) as in road side kerb stones (Factory made) and similar articles with plain faces including chamfers weathering throating etc, set in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete block masonery type C1 (1:3:6) with solid blocks exc 10 cm in width and setting in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old/new surface of wall / kerb stone or concrete surface & applying two coats of acrylic (antifungal) exterior grade paint, etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC (1:2:4) type C-2 using 40mm graded mechanically srushed stone aggregate as in plinth protection, concrete road or parking area finished even and smooth without using extra cement with & Including 10mm wide 30mm deep joints with sand mixture etc complete all as specified and directed by Engineer-in-Charge

S&F for rolled mild steel in trusses (framed), trussed, purlins, (beam, tee, angle) channel or flat sections including distance pieces, cleats etc, with Fe 410-W (Gde E-250) quality -B etc complete all as specified and directed by Engineer-in-Charge

Material and labour for finishing surface of concrete road, pavement with brooming etc complete all as specified and directed by Engineer-in-Charge

Dismantling of posts struts (wood,steel or RCC) any section taking out embeded portion and making good disturbed ground etc complete all as specified and directed by Engineer-in-Charge

Dismantling fencing wire mesh any type and any description etc complete all as specified and directed by Engineer-in-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good distrubed surface etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel angle iron for posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Mild steel bolts 10mm dia and 65 mm long purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut etc complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link MS galvanised fencing cut from GI wire 10 gauge and 50 mm apperture weight not less than 3 kg / Sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by Engineer-in-Charge Note :-(each line wire to be measured)

Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking binding cutting etc complete all as specified and directed by Engineer-in-Charge

Material and labour for plain cement concrete in PCC 1:4:8 type D2 using 40 mm graded stone aggregates as in foundation filling and mass concrete or similar work etc complete all as specified and directed by Engineer-in-Charge

Material and labour for TMT bars 8 to10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered / unplastered/old surface and applying three coats of white wash on wall etc complete all as specified and directed by Engineer-in-Charge

Material and labour for flat iron 40 x 6 mm cut to required length including drilling holes for fixing of nut and bolts to hold chain link fencing etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick/stone walls including taking out joints hacking for keys crubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) surface channel or drain etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs precast cement concrete 25mm thick RCC jallies, including all moulding of any size and pattern in (1:2:4) type B0 using graded stone aggregate, set in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for providing precast cement concrete type B-1 (1:2:4) 20mm graded stone aggregate in landings, cover slabs (for man holes etc) chulla hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces, and setting in mortar complete with joints to match set in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for new surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exc 1.5m wide and n exc 1.5m deep in for foundation etc getting out in hard dense soil and removing surplus material n.exc 50 mtr and making good disturb surfaces etc complete all as specified and directed by Engineer-in-Charge

Hardcore of gauge n exc. 63 mm, of broken stone boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC M-25 design mix using 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed by Engineer-in-Charge

S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber rings joints fixed with cclamps to walls etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 34,577.00 shall be deducted from BOQ on account of schedule of credit

M/s IBEX Engineers and Contractors

M/S-B.R.SONAWANE

M/S. SHOURYA ENGINEERS AND CONTRACTORS

Priyadeep Construction

Ms. M.D. Auty

OM SAI ASSOCIATES

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

S.k ENTERPRISES

M/s Meher Construction

Takshashila electricals