SPECIAL REPAIR TO BLDG NO P-118, P-119 AND P-120 ORs MD ACCN AT SRC LINE UNDER GE (N) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc. complete all as specified & directed.

M&L brick work with old size sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

M&L brick work with old size sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) but except bricks complete all as specified and directed.

Demolition of cement concrete of ground floor n. exc 15 cm in depth in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm crushed graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

M&L non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm thick screed ded in cm 1:6 complete all as specified & directed.

S&F Matt finished coloured ceramic tiles coloured of 7-8mm thick (squre/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 8.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified & directed.

M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jumps, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jumps, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

All as per item No 14.00 above but factory made bull nosed as in riser of steps, skirting/dado laid over 10mm thick in cm 1:4 complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed.

S&F for factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S&F for factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x95mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S&F for factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S&F factory made gauzed shutter made out of angle iron 35mmx35mmx5mm and 25mmx25mmx5mm and 1.5mm thick, 10mm sqaure bars grills with stainless steel fly proof wire mesh having stainless steel 0.5mm nominal dia wire and 1.20mm average width of aperature including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid Modular WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum, screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as per specified and directed. (Note: Stainless steel butt hinges and necessary stainless steel screws shall be paid separately).

M&Lfor kitchen cabinet and cupboard shelf made of 18/19 mm thick plywood grade 1, quantity, exterior grade commercial type decoractive with mica on both face (thickness of mica shall be 0.8mm thick finished with adhesive and stainless steel screw/nails) complete all as specified and directed.

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with, clips, frame, necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.80mm thick black glass complete all as specified and directed.

M&L framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of zinc chrome/primer complete all as specified & directed.

M&L stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F 30 mm flaps continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed.

M&L for 125mm long brass handles cast type, polished bright fixed with stainless steel screw complete all as specified & directed.

S&F for stainless steel wide 110 degree Hydraulic hing fixed with stainless steel screw complete all as specified and directed.

Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium anodised tower 150 mm long of extruded section complete all as specified & directed.

S&F stainless steel bolt 300mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified & directed.

M&L for stone slab 30mm to 35mm thick stone dressed true and square, in one length not less than 60cm and not exc. 120cm in copings, window cills, chajjas, sunshades, etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges rounded or chamfered as directed, set jointed and pointed in cement mortar 1:4 complete all as specified and directed.

Supply and fix 150mm, helical door spring including roller and roller plate fixed with screws to wooden chowkhat or welded to steel frame complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all as specified & directed.

M&L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly Note : Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L for preparation of newly plastered surfaces of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed.

M&L preparing plastered un plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall by applying 3mm thick wall care putty and making the surface smooth finishing walls using roller for painting complete all as specified and directed.

M&L for preperation of new plastered surface of wall by applying and making the surface smooth and applying two coats of weather coat over one coat of primer using roller for painting complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide (reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

M&L RCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in beams, lintels, bressummers over 1.5m span etc complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All as per item No 51.00 above but 6 to 8 mm dia complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

All as per item No 53.00 above but 20 mm bore pipe complete all as specified and directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling over head water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed.

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair cromium plated 15 mm bore size bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- "CERA Cat Part CERA F1014152/Pearl Cat part ARI-003/Hindware Cat part No F-330011"

S&F in floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified and directed. Make:- "CERA Cat Part CERA F1015362/Pearl Cat part ARI-009/Hindware Cat part No F-200007"

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair CP brass soap dish complete all as specified and directed.

S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Supply and fix 75mm bore PVC pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

Supply and fix 110mm bore PVC pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia fixed in repair) complete all as specified and directed.

All as per item No 81.00 above but 25 mm dia complete all as specified and directed.

S&F 15mm dia brass chromium plated central hole wash basin mixture, fancy type with or wthout lettered 'Hot' or 'Cold' with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe in repair complete all as specified and directed. Make:- "CERA Cat Part CERA F2002461/Pearl Cat part ARI-013/Hindware Cat part No F-740009"

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing 'Hot' or 'Cold' water screwed, fixing and connection to pipes with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed. Make - Cera Cat Part No F-1017401/Pearl Cat Part No ARI-015/ Hindware Cat Part No F-74 0022.

S&F15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and directed. Make - Cera Cat Part No F-2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No F-330023.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F (in repair) chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.

S&F stainless steel plate rack of size 750 x 600 mm including shelves, rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified and directed.

S&F 25mm dia stainless steel decorated curtain rod with bracked and ring complete all as specified and directed.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified and directed.

Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and directed.

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 complete all as specified and directed.

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) complete all as specified and directed.

M&L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed.

M&L for 50mm thick average thickness of PCC 1:2:4 type B-O (using 12.5mm graded stone aggregates) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material & labour for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementitious grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required. Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete.

Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. (Note: Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract complete all as specified and directed.

M&L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grooves for fixing of man hole cover including necessary form work complete all as specified and directed.

M&L for repairing existing RCC structure work by guniting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaft folding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for 15mm thick rendering on brock masonary wall surfaces in CM 1:4 mixed with water proofing compound finished even and smooth with using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L 200mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified internal diameter of pipe 200mm including demolition, removal from site upto 3.0Km as diercetd by Engr-in-Charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.

M&L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150mm including demolition, removal from site upto 3.0Km as diercetd by Engr-in-Charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) reinforced complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20mm graded crushed stoned aggregate) for mahole cover including placing and set in cement mortar 1:6 complete all as specified and directed.

M&L mild steel deformed or twisted bar (TMT bar) 10mm dia and cover cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9mm dia completed all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggragate) as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately) complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying three coats of white wash on walls surface complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft /loose soil complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point soil complete all as specified and directed.

M&L 60mm thick coloured interlocking tile with pigment over sand cushioning, ineterlocking tiles jointd filled with sand complete all as specified and directed.

M&L sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20mm graded crushed stoned aggregate with solid blocks, exc 10 cm in width and setting inset in cement mortar 1:6 complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm, soft loose soil complete all as pecified and directed

M&L cement concrete in foundation filling and mass concrete 1:2:4 type C-2 using (40mm graded crushed stone aggregate) complete all as specified and directed.

S&F Mild Steel angle iron posts and struts in fencing (angle of size 65x65x6) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagonal faces of each panel to be intertwined with Chain link fencing, and fixed to posts with MS nut, bolts and washers including all necessary drilling bolting etc, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Supply only MS galvanised chain link fencinng of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10 cm but not exc 15 cm and 12mm dia complete all as specified and directed.

Supply only, round bars etc, in available length complete conforming to Fe-290 (Gde-165) complete all as specified and directed. Note: - 10mm dia mild steel round bars 2 Nos shall be provided horizontly by interwewaving in the chain link and fixed with mild steel screw bolts with MS flat complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old surface after complete removal of existing treatment by mechanical means and applying 3mm thick wall care putty (JK/Birla White) over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified and directed.

M&L for preparation of complete removal of existing treatment from old plastered surfaces of wall by applying 3mm thick wall care putty (JK/Birla White) and making the surface smooth and applying two coats of weather coat over one coat of primer using roller for painting complete all as specified and directed.

M&L for ceiling surface preparation of old surface after complete removal of existing treatment by mechanical means and applying 3mm thick wall care putty (JK/Birla White) over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated Steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps, as in roof covering/cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws neoprene and EPDM washers complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit medium grade not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :-

One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One fan point / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One two way point controlled by two, two way switches 05 / 06 Amps complete all as specified and directed.

All as per serial item No 133.03 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified & directed.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, two way 240 volts complete all as specified & directed.

Supply and fix in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing bell push flush type, 5 Amps, 240 volts complete all as specified & directed.

Supply and fixing Bell, AC , 240 volts complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

Supply and fixing LED wall mounted fancy light of 10 watts, complete all as specified and directed.

Supply and fixing LED lamp 9/10 watts, complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.

S&F 25W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security brackets of 32 mm dia GI pipe medium grade upto 1.2mtr long bend of shape at 100-200 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

M&L for sub main wiring with 06 Sq mm (nominal cross section area) two single core, 1100 Volts grade, stranded, PVC insulated, sheathed copper cable with and including continuous earth wire of size 6 Sqmm nominal roll cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories/ fittings, brass screws, washers etc and connected to common earth dolly including all cutting/chases etc in wall, making good to walls etc including taking down old U/S sub main wiring and two coats of white/ colour washing/ distempering etc to the disturbed surfaces to match the exisiting complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempring etc to match the existing disturbed surfaces including taking down old u/s DB's complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10 kA and making connections complete all as specified and directed.

Supply & fixing Isolator, DP (Double Pole), AC, 240 volts, capacity 32 Amps and making connections complete all as specified & directed.

Supply and fix MCCB 4 pole,63 Amps 25 kA.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 16 kA 63 Amp G frame MCCB. with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

supply and fixing Exhaust fan steel body with louver and fixing accessories 230 Volt and 300mm sweep complete all as specified and directed.

supply and fixing PVC Exhaust fan with louver and fixing accessories 230 Volt and 250 mm sweep complete all as specified and directed.

M&L for making opening in the wall for fixing exhaust fan up to 250mm / 300mm,including plastering work & making good the surfaces complete all as specified and directed.

supply and fixing ceiling fan with fan regulator 1200 mm sweep BEE, BLDC Fan, AC 230V complete all as specified and directed.

Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed.

M&L, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 25 Sqmm 4 core complete all as specified and directed.

M&L, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 70 Sqmm 3.5 core complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc. or laying of cable or pipe etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil and levelling of bottom surface to required level complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/cable duct complete all as specified and directed. (Note: Only Punned thickness shall be measured for the purpose of payment)/

M&L for fly ash brick protection length of brick shall be laid across the length of cable complete all as specified and directed.

GI light tubing 40mm dia laid in trenches, road crossing, paasing through pipe or laid in wall/pole complete all as specified and directed

M&L for Galvanized steel tubing, Medium grade, with all fittings of size 25mm dia for protection cable complete all as specified and directed.

M&L for Galvanized steel tubing, Medium grade, with all fittings of size 20mm dia for protection cable complete all as specified and directed.

Supply and fix Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and directed by Engr-in-charge.

S&F and testing, 25 mm bore, gun metal gate valve / ball valve, ISI marked, hand lever / iron wheel head operated, screwed at both ends for iron pipes and fixed including taking down of old unserviceable gate valve all as directed. Make: Kartar / Zoloto / Leader / Surya.

Feeder piller Box cubical type made CPRI approved, suitable for 3 phase, 415 volts, 50 Hz system, with 200 Amps capacity aluminum bus bar, outdoor type factory fabricated with 3 mm thick CRCA sheet with inspection doors at front & rear side inclusive of necessary locking arrangement suitable opening for vent and cable entry spare terminal for MCCB 01 Nos with angle iron of size 50x50x5 mm thick, grouted in floor complete with the following accessories, duly pre treated and powder coated finish complete alongwith following accessories all as specified and directed. (i) 160 A, 4 P, 25KA - 01 No (ii) 63 A, 4P, 16 KA - 03 Nos (iii) MCB TPN 32 Amp - 01 No (iv) LED indicator lamp (RYB) - 01 No

m/s gupta construction

Arun Construction Co.

QUALITY BUILDERS

mohanlal gupta

High Tech Metal India

Shikhar ji Enterprises