CERTAIN REPAIRS/REPLACEMENT TO ROOFING,JOINERIES, FLOORING, CEILING, FOOTPATH AND PERIODICAL SERVICES AT HELIPAD AREA 1 (I) R and O FLT UNDER GE RANCHI

Amount

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Plain, galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roof, walls etc, with grade of zinc coating 275.

All as per item 5 above but except sheeting

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n exc1.5 Sqm and removing from site .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site .

Supply and fix for fabrication of aluminium doors with rectangular box section 101.60 x 44.45 x 2.30 mm thick , Door shutter vertical of cross section 85.00 mm x 44.50mm x 1.50 mm thick , Top of cross section 47.50 mm x 44.50mm x 2.00mm thick, middle of cross section 100.00 mm x 44.50mm x 2.00mm thick and Bottom of cross section 114.00 mm x 44.50mm x 1.85 mm thick including joining cleats, beading,locking arrangement, rubber packing, necessary aluminium handle , Aluminium Hinges, Aluminium Towerbolt fixing etc complete with 5.00mm thick tinted glass complete all as specified and directed . (Make: Hindalco or equivalent)

Supply and fix for anodised aluminium bottom three track for sliding shutters of cross section 91.80 mm x 31.75 mm x 1.2mm thick @1.284 Kg/RM and top and side three track for sliding shutters of cross section 91.80 mm x 31.75mm x 1.2mm thick @ 1.225 Kg/RM including sliding window shutter type top and bottom of Size 40.00x18.00x1.20mm @ 0.428 Kg/RM,side of Size 40.00x18.00x1.20mm @ 0.379 Kg/RM and Window shutter interlock side of Size 40.00x27.00/18.00x1.20mm @ 0.488 Kg/RM with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with 4.0 mm thick tinted glass & Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm and fixed with aluminium wire staples complete all as specified and directed . (Make Hindalco or equivalent)

Supply and fix for anodised aluminium bottom four track for sliding shutters of cross section 122.20 mm x 31.75 mm x 1.2mm thick @1.284 Kg/RM and top and side four track for sliding shutters of cross section 122.20 mm x 31.75mm x 1.2mm thick @ 1.225 Kg/RM including sliding window shutter type top and bottom of Size 40.00x18.00x1.20mm @ 0.428 Kg/RM,side of Size 40.00x18.00x1.20mm @ 0.379 Kg/RM and Window shutter interlock side of Size 40.00x27.00/18.00x1.20mm @ 0.488 Kg/RM with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with 4.0 mm thick tinted glass & Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm and fixed with aluminium wire staples complete . (Make Hindalco or equivalent)

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .

M&L PCC type B1 using 20 mm graded aggregate as in hold fast block and copings.

S&F door closer hydraulically regulated, designated No-2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body

S&F floor door stopper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140 mm complete all as specified and directed.

S&F Brass 4 Levers Mortice Lock , vertical type , 75mm .

Supply and fixing for fabrication of Aluminium Partitions of grid approx 1.25M x 1.05 M consisting of Aluminum Sections 101.50mm x 44.50mm x 2.00 mm thick and 49.91mm x 44.45mm x 2.00 mm thick hollow anodised and 5.00mm tinted glass including providing screwless aluminium glazing clip and 01 No Aluminium door of size 0.90M x 2.00M with rectangular box section 101.60 x 44.45 x 3.18 mm thick , Door shutter vertical of cross section 85.00 mm x 44.50mm x 2.00 mm thick , Top of cross section 47.50 mm x 44.50mm x 2.00mm thick,Centre of cross section 83.50 mm x 44.50mm x 2.00mm thick and Bottom of cross section 114.00 mm x 44.50mm x 2.00mm thick including joining cleats, beading,locking arrangement, rubber packing, necessary aluminium handle , Aluminium Hinges, Aluminium Towerbolt fixing etc complete with 5.00 mm thick tinted glass complete all as specified and directed. (Make: Hindalco or equivalent)

Supply and fixing for fabrication of Aluminium Partitions of grid approx 1.25M x 1.05 M consisting of Aluminum Sections 101.60mm x 44.50mm x 2.00 mm thick and 49.91mm x 44.45mm x 2.00 mm thick hollow anodised and 5.00mm tinted glass including providing screwless aluminium glazing clip including joining cleats, beading, rubber packing, etc complete with 5.0 mm thick tinted glass complete all as specified and directed . (Make: Hindalco or equivalent)

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee section) powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners.

M&L 4mm thick non asbestos fibre cement building board of size 600X600 as in ceiling over aluminium framework fixed in ceiling flat or sloping.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 75 mm thick as in Subase of floor

M&L 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring to receive floor tiles

Dismantling floor, hearth or wall tiling includiing cement mortar bedding, removing serviceable tiles to store and rubbish off the premises

M&L screed bed or bedding layer of mortar 15 mm thick for layinng floor finishes in CM 1:6 for fixing tiles.

M&L for providing cement mortar 10 mm thick in CM 1:4 as backing coat for laying tiles in dado , on brick or concrete surfaces

M&L Non skid ceramic coloured tiles 7-8 mm thick area of each tile exc 0.18 SM but not exc 0.38 SM in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors.

All as per item No above 27 but on vertical surfaces such as skirting.

M&L Non skid ceramic coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.11 SM but not exc 0.18 SM in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 X 250X 7 /450x350x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match complete all as specified and directed

Demolition of brick work built in cement Mortar

Taking down cement plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbinng down with water, etc.

M&L brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed

All as per item No 33 above but except bricks

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work , finished even and smooth without using extra cement.

M&L for preparing new plastered surfaces of wall and applying two coat of distemper oil emulsion, white or tinted over a coat wall primer including a coat of 1.5mm thick putty.

M&L for complete removal of existing treatment over wall and applying two coat of distemper oil emulsion, white or tinted over a coat wall primer including a coat of 1.5mm thick putty.

M&L for preparation of new steel surafces of any description not otherwise described, over 10 cm width or girth, priming with a coat of red oxide primer and applying 2 coats of synthetic enamel paint of approved shade .

M&L, applying two coats of aluminium paint on old steel surface of any description over 10cm width or girth not otherwise described incl preparation of surface and necessary scaffolding etc

M&L One coat of cement based paint on old plastered or concrete surface including prepration of surface

M & L for making lines, dashes, arrows, letters etc not exceeding 15 cm wide on bituminous/concrete pavement/path surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST specification, not less than 1mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufactures instructions including preparation of old painted surface .

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, .

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete all as specified and directed

Demolition and breaking up drain pipes 75mm (salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, laid in trenches or in floors

S&F PVC bends any radius 75 mm dia

S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia

S&F in repairs Grating doom 75mm of PTMT .

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends, complete all as specified and as directed.

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated , screwed down, high pressure, for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair viterous china bowl urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

S&F in repair Waste coupling of PTMT (half or full threaded) for 32 mm bore dia of dishcharge pipe (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F 32mm flexible pipe for urinals and wash basin, complete all as specified and directed.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair PVC cabinet looking mirror box type of size 355 x 455 mm, complete all as specified and directed. (Make-prayag or equivalent)

S&F in repair white EWC seat cover .

S&F CP Health faucet with 1 Meter PVC Tube and hook

M&L for running welding in repair thickness of metal to be welded N.exc 6mm complete all as specified and directed

M & L machine pressed precast concrete interlocking paver block with grey cement and pigment (PVC Coated) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over sand cushioning .

M &L for Sand filling under floors or in foundations including watering and consolidation

M K Enterprises

M/S JAI MATA DEE CONTRUCTION CO.

M/S ABDHESH CONSTRUCTION

india trading company

Bihar traders

jai maavindwashni sales & supply

M/s Dwarika Nath Singh