NIT-62

Amount

SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS.

Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line etc, complete all as specified and as directed by Engineer-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.

Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 200mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.

Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 150mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.

Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 200mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.

Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 150mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.

Cast iron pipes with flanged ends, centrifugally cast, Class LA, size 200mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.

Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 200mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, but except pipes, complete all as specified and directed by Engineer-In-Charge. Note: Old serviceable pipe shall be used as retrieved from taking up.

Description all as serial ietm No- 1.09 here-in-before but for 150mm bore pipe.

Cast iron fititngs bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, size upto 200mm bore, complete all as specified and directed by Engineer-In-Charge.

Run lead joint, suitable for cast iron pipes and fittings of 200mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Run lead joint, suitable for cast iron pipes and fittings of 150mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Rubber gasket, suitable for 200mm bore cast iron pipes and fittings including jointing materials such as bolts, nuts, washers and mineral oil, complete all as specified and as directed by Engineer-In-Charge.

Sluice Valve, cast iron, Class PN 1.6, size 200mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified.

Description all as serial ietm No- 1.15 here-in-before but for 150mm bore pipe.

Description all as serial ietm No- 1.15 here-in-before but for 100mm bore pipe.

Non Return Sluice Valve, Class PN 1.6, size 200mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified.

Cast iron air release valve suitable for 200mm bore pipe line, ISI marked, flanged type, including rubber gaskets, nut, bolts and washers, complete all as specified.

Construction of brick masonry valve pit of size 1200x1200x1200mm (internal dimensions of chamber) including plain cement concrete, M-7.5 (1:4:8), type-D2 (using 40mm graded crushed stone aggregates) 100mm thick, as in sub base and PCC M-15 (1:2:4), type-B2 (using 40mm graded crushed stone aggregates) 100mm thick, as in flooring, brick work masonry, 23cm thick in cement mortar 1:4, rendering 15mm thick in cement mortar 1:4 on internal and external surfaces with two coat of lime wash, mild steel framed work as in valve pit covers with angle iron frame 50x50x6mm and including mild steel sheet cover 3.15mm thick complete, drilling/ welding for fixing of steel sheeting with mild steel hinges, handles and suitable locking arrangements, fastening arrangements for fixing, nuts, bolts and washers including painting with two coats of synthetic enamel paint over a coat of red oxide primer, including excavation in any type of soil, returning filling in external areas and removal the surplus soil to a distance of not exceeding 50mtrs, complete all as specified and as directed.

Description all as serial ietm No- 1.21 here-in-before but for construction of brick masonry valve pit of size 900x900x900mm (internal dimensions of chamber).

Horizontal boring or drilling under the surfaces of road/ path etc, complete all as specified and directed by Engineer-In-Charge.

Amount of Schedule of credit of for Rs 1,09,280.00 shall be deducted from quoted amount.

MAMTA ENTERPRISES

M/S SHARMA ENTERPRISES

Ankush Gupta