REPAIR TO WALL PANELING, ROOF SHEET, PLASTER AND BRICK WORKS ETC OF TEMP/PERMT BLDG OF LOWER AND UPPER AREA OF NIMU UNDER AGE(I)NIMU

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, plain mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on wall complete all as specified and directed Engr-in-Charge.

S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for PVC wooden finish flooring 9-10mm thick of approved colour approved by AGE(I) with necessary fixing to existing floor including dismantling of existing old one complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick natural teak wood fixed with nails to timber frame work as in walls including varnishing 2 coat complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick natural teak wood fixed with nails to timber frame work as in ceiling including varnishing 2 coat complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.

M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class soft wood timber scantling plain fillets square, rectangular in section area exc 3 Sqcm and not exc 6 sqcm clean sawn secured with nails or brands as in lipping/beading complete all as specified and directed by Engr-in-Charge.

Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified and directed by Engr-in-Charge.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth protection including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.

M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6)complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster surface and applying three coats of white wash on wall complete all as specified and directed Engr-in-Charge.

M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of oil emulsion distemper over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed by Engr-in-Charge.

M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of cement base paint over and including one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plaster surface and applying one coat of white wash on wall complete all as specified and directed Engr-in-Charge.

M&L preparing old plastered surfaces of walls including cornices, pillasters etc. and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plaster surface and applying one coat of white wash on wall complete all as specified and directed Engr-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 64,150.00 and any other reduction if any from quoted amount.

M/S SONAM NAMGIAL

TSEWANG DORJAY