PROVIDING 1NO 20 PERSONS BED CUM PASSENGER LIFT FOR CEMONC BUILDING G 2 IN GOVERNMENT RAJA MIRASUDAR HOSPITAL

Amount

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1No.20 persons 1360 kgs. Capacity Bed Cum Passenger Lift and Passanger Lift Gearless with machine room as per the following specifications. Technical specification:- 1. Number of Lifts / Type of Lift: One / Bed cum Passenger 2. Load / Speed : 20 Bed cum Passanger (1360 kgs) / 1.0 Mtr. Per second 3. Drive : Micro Processor based VVVF with enhanced ride comfort and leveling functions. 4. Travel / PIT / Head Room : 9 Mtrs (Approx) 5. Number of Floors : 3 (Ground + 2 Upper Floors) 6. Number of Landing Entrances : 3 7. Number and Position of Car Entrances : 1 (ONE) 8. Position of Machinery : Directly above the Lift well - GEARLESS 9.Size of Lift well: 2400 x 3000 (MM Wide * MM Depth) 10. Lift Car Inside size:1300 x 2400 (MM wide * MM Depth) 11. Type or Design of Lift Car: Stainless steel neat - Hairline Finfish- 1.5 mm Thickness High quality S.S 304 Grade 12. Fireman's switch :Included. 13.Car Ceiling - Car Floor : Sleek (Small Circular Lights) - SS Hairline Finish - PVC Flooring. 14. Car Fittings. LED Lights & Regular circular) Fan 300mm sweep. 15. Type of Car Entrance Protection: Power Operated Side Opening Sliding Opening Sliding Door - Stainless Steel - Hairline Finish 1.5 mm Thickness S.S 16. Type of Landing Entrance Protection: Centre opening slinding Door - Stainless Steel - Emergency key opening at all landings. 17. Type of Landing Door Frame: Stainless Steel neat - Hairline Finish 1.5 mm Thickness S.S 18. Additional Door Spec : 19. Type Opening of Gates / Doors : 1200 x 2000 (MM Wide * MM height)

Wiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)(SD - 22)

Supply and fixing of Supply and fixing of single box type 4'20W LED fitting with LED complete with T.W. round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.(Make : Philips / Havells / Equivalent)(DATA - 1)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb.(SD - 84)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD - 448)

Supply and fixing of 300 mm (12") Sweep light Duty AC exhaust fan complete with necessary wall opening and making good of the wall.(SD-114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC Exhaust fan.(SD - 120)

Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet.(SD - 141)

Supply and fixing of 2 Nos 5 Amps(3pin and 2pin) combined flush type wall socket with 5A flush type switch and 1 No 5A/15A 3pin combined flush type wall socket with 15A flush type switch concealed in suitable TW Box in flush with wall and covered with 3mm thick hylum sheet with earth connection. (DATA - 2)

Supply and fixing of 3 phase 4-Way vertical type double door with IP-42 protection (MDS/ Legrand/ L&T make/ equivalent) in sheet steel enclosure with busbars and neutral links with 1 No 63A 4-Pole MCB & 63A 4P RCCB/ELCB as incoming and 2 Nos 32A TP MCB & 6 Nos 20/32A SPMCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCBDB and MCB's should be of Higher End) (DATA - 3)

Supply and fixing of 63A TPN MC switch with suitable angle iorn frame work with MS cable entry boxes with earth connection only.(SD - 166)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.(SD - 56)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD - 423)

Supply and clamping of 3½ X 35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.(SD - 201)

Supply and fixing of brass cable gland for 3½ X 35 sq.mm PVC Armoured LTUG Cable with earth connection.(SD - 165)

Supply and providing cable end termination of 3½ X 35 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.(SD - 214)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.(SD - 211)

Supply and run of 1 No. 8 SWG Copper Wire in suitable PVC rigid pipe on wall/floor/ground for earth connection.

Guna Engineering (BID ID -1328764)